How To Brick Up A Garage Door?

How To Brick Up A Garage Door
How to Install Brick Molding Around a Garage Door

  • Step 1 Measure and mark 1/2 inch above the door jamb. Measure and mark 1/2 inch to each side of the door jamb.
  • Step 2 Measure across the top of the garage door from outside mark to outside mark. This is the inside or bottom measurement of the top piece of brick molding.
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8

Can I brick my garage door up?

Yes, you can brick up your garage door, but you will need fairly advanced DIY skills and a selection of tools and materials for the job.

Can you use a garage door as a wall?

Imagine walking into a room in your home and with the push of a button, the entire wall disappears overhead. Using garage doors for the interior of homes is the new garage door trend. This idea isn’t new to everyone however. Retailers and restaurants have been doing it for years but not until recently have architects begun including interior garage doors in their home designs.

Many homeowners now use garage doors as retractable room dividers and gates to the outdoors. Garage doors can also be used as exterior walls, closet doors and in place of sliding glass doors. The possibilities are endless. The goal is to let in the natural light and bring the outdoors into the home. Using contemporary aluminum and glass garage doors provides homeowners with great outdoor views as well as a cross-breeze throughout the home.

This is extremely popular in coastal and mountainous areas where the scenery is especially spectacular. Homeowners can enjoy a panoramic view through an attractive wall of windows in any living space in their home. Homeowners’ most popular choice is the garage door made of clear glass held in place by an aluminum grid system.

  1. It gives a clean, modern look for exterior and interior use.
  2. These garage doors come in a large variety of colors and offer tinted and frosted glass for privacy.
  3. They serve both functional and aesthetic purposes in the home.
  4. You just have to see it to believe it! Pinterest offers a large variety of photos using garage doors on the interior of homes.

Check it out! Unlike the industrial-looking traditional doors that use springs, cumbersome rails, and electronic motors, new garage doors are now available that are track-less, spring-less and rail-less! This exciting new technology gives homeowners and home designers many more options in using garage doors on the interior.

You can see them as wall dividers in kitchens, bedrooms, dining rooms, closets and living rooms. When closed they offer privacy and sound control. When opened they create an expansive indoor space. Using garage doors on the interior of your home is exciting! These garage doors can hug the ceiling as a traditional garage door would or climb straight up walls opening a space several stories high! Not only are they beautiful, they are also sturdy – made with the best quality insulated glass.

You won’t feel drafts coming through or extreme heat. The cost range depends on size, type of glass and the company you work with. If you want to truly impress your guests, consider opening up your home to the great outdoors by adding garage doors to the interior of your home.

Can you change a garage door to a window?

1. Do I need planning permission? – Answer, It depends. If the work is internal only and does not involve extending the garage externally then the work should be covered under ‘permitted development rights’. However, if you intend making your garage in to a ‘granny flat’ or bedsit with facilities, this will be classed as a separate building and planning permission would usually be required.

  • If you are replacing your garage door with a window, but all other walls to the garage remain as is, planning permission is not usually required.
  • However, if your garage conversion involves adding windows to the side or back of your garage, then permitted development may not apply.
  • You may need to consider your neighbours line of sight or privacy etc.

We always recommend if you are adding windows to the side or rear of your property and there is a property adjacent, you seek guidance from your planning department or contact us for advice.

  • If you live in a conservation area or a new build development, permitted development rights may not apply and you will need to contact your local planning department for further advice.
  • If your building is listed, you will also require listed building consent
  • To find out more about permitted development and planning permission, visit the government website or consult your local planning department.

How do you brick a door frame?

Step 6 – Arrange a layer of bricks across the bottom of the door frame, using mortar on one side of each brick and placing a ½-inch layer on the top of each one. Keep stacking the bricks until you fill in the door frame. Some bricks might need to be cut to fit.

Do I need permission to brick up my garage door?

Planning permission is not necessarily required for bricking up a garage door if the work is internal and doesn’t involve enlarging the house. However, planning permission is required if you’re converting the garage into a separate house, if your house is listed or if you live in a conservation area.

Can I convert my garage to a room without planning permission?

Planning permission is not usually required to convert your garage into additional living space for your home, providing the work is internal and does not involve enlarging the building. However, sometimes permitted development rights have been removed by condition which may prevent a garage from being able to be converted without planning permission.

How can I enclose my garage without removing the door?

4. Add a Wall – If your garage is large enough, you may want to consider building a wall a few feet from the garage door. This will allow you to keep the garage door on the outside while adding more insulation and soundproofing to the converted room. The extra space between the new wall and the garage door can also serve as storage space if you add a door.

What is the cheapest way to cover garage walls?

Wood sheathing – Plywood, medium-density fiberboard (MDF) and oriented strand board (OSB) are expedient and low-cost solutions for garage walls. They can be attached over studs quickly with framing screws and, unlike drywall, wood doesn’t require any taping, mud, or sanding.

Can I convert my garage into a room myself?

Do I need planning permission to convert a garage? – How To Brick Up A Garage Door (Image credit: Future PLC/Polly Eltes) Permission isn’t usually required for a garage conversion, provided the work is internal and doesn’t involve enlarging the building. However, you must check with your local authority’s planning department first. Garages that are listed or located in conservation areas will be less straightforward to convert.

Do you need planning permission to change a garage door to a window?

Contact Drawing and Planning Today on 0208 202 3665 to Find Out How We Can Help You With Your Garage Conversion! – At Drawing and Planning, our consultants have extensive knowledge and expertise in the numerous and varying Planning Articles, Directions and restrictions of all Local Authorities.

  • Our team of consultants would be glad to assist you with any query you may have regarding your Garage Conversion.
  • Should you need Garage Conversion planning permission, we would be glad to assist you with all elements of your application.
  • If you would require drawing only, our in house architects can provide you withdetailed existing and proposed drawings for all types of Garage Conversions.
You might be interested:  How Much Cement Needed For 1000 Bricks?

Planning permission for a garage conversion to make it an inhabitable area is generally not requires, as long as all of the work for the conversion project is being done along the interior of the garage. Also, if the conversion does not require an enlargement of the building, planning permissions will not be required.

  1. If the integrity of the building is going to be sacrificed during the conversion, then planning permissions will be needed.
  2. Properties that have had development rights removed will need to contact the planning authorities.
  3. Normally, if you reside in a brand new housing area or live in a conversation area, your plans to alter your garage will need to be approved by the planning authority, before any alterations on this area of the home can be performed.

Do I need planning permission for a garage conversion? Usually, planning permissions are not required as long as your conversion is not going to affect the exterior surface of the home; once the exterior surface of the home starts being tampered with, then planning permissions will be required.

Can I convert my garage without building regs?

The conversion of a garage, or part of a garage, into habitable space will normally require approval under the Building Regulations. General guidance on the performance expected of materials and building work in order to comply with the building regulations and practical examples and solutions on how to achieve compliance for some of the more common building situations can be found in the approved documents section.

Approved documents ( Approved documents Build Aviator’s estimating service can help you plan your project by providing an accurate cost of the proposed changes. Find out more 1, Further Information The following pages give an indication of some of the elements normally required to satisfy the requirements of the Regulations when converting a garage.

These common work sections give an indication of several other elements normally required to satisfy the requirements of the Regulations when converting a garage:

  • Doors and windows 2
  • Drainage 3
  • Electrics 4
  • External walls 5
  • Internal walls 6
  • Roofs 7

A planning consultant may help with the smooth running of your garage conversion project. To find an accurate consultancy quote, explore Studio Charrette’s calculators 8, Find a Trade Professional Use our partner directories from CIAT, FMB, RIBA, or RTPI to find an chartered architectural technologist, builder, architect or planning consultant to help with your project or development.


Do garage doors with windows add value?

Enhances property value – Another benefit of garage door windows is that they can help increase the value of your home. It can make your property stand out from the crowd. If you are looking for a way to give it an extra push, adding some nice windows could be just what you need to get more buyers interested in buying your house.

How do you attach a brick without drilling?

Two ways to hang art on a brick wall without drilling holes Q: A couple of years ago, I had the drywall removed in a few rooms in my home to expose the brick walls behind it. I live in a late-19th-century rowhouse on Capitol Hill, and I absolutely love the new look.

  1. I have a pretty extensive art collection, however, and I like to move the pieces around from time to time.
  2. Now most of the pieces are just sitting around on the floor.
  3. Is there a way to re-hang these pieces without drilling holes into the brick? A: Devices called brick clips or brick hangers allow people to hang pictures, mirrors and other objects on walls without drilling into the brick.

Two examples are Brick Clips by a company called Tuopu (10 for $14.99 on ) and OOK Brick Hangers (two for $2.48 at ). Hardware stores and home centers carry similar products with different names, especially in the lead-up to winter because the clips are often used to support strings of holiday lights.

The clips are designed to grip bricks where they project beyond the mortar. Designs vary, but there is always a saw-toothed edge at the top and two metal tabs at the top or bottom that spring into place against the lip of an adjoining brick. The clips are rated to support different weights up to 30 pounds, but if you need to hang something heavier, you can use two or more hangers.

A bigger issue is making sure the fasteners will work with the bricks in your wall. The fasteners are all labeled for the suitable brick height, because the saw-toothed and spring-fit grips won’t work if the bricks are too tall or short. And that’s not the only issue.

  1. The bricks must have relatively square edges, and the mortar between bricks must be far enough back from the face of the brick.
  2. The Tuopu fasteners require a setback of one-eigth of an inch, according to the listing on Amazon.
  3. The OOK fasteners need at least a quarter of an inch, and preferably a bit more, said Al Marchetti, product manager for OOK, a brand owned by the Hillman Group.

The picture you sent shows numerous bricks with chipped edges and with mortar joints that appear to be close to the face of the bricks. So these fasteners might not grip your wall well, especially if you want to hang pictures in precise locations. They might work if you’re willing to hang pictures only where you can find bricks with intact edges on the top and bottom.

When a brick wall isn’t suitable for clip-on hangers, another option is OOK’s Plastic Hardwall Hangers (three for $2.39 at,) Each hook has three thin nails pre-started into the back, ready for you to tap into brick with a hammer. You’d have to test whether your bricks are soft enough to hammer into, but there’s a good chance they are.

Bricks used for walls are usually softer than the super-hard bricks suitable for outdoor paving, because those need to be fired at higher temperatures to make them less porous and therefore more frost-resistant. The nails used for the Hardwall Hangers are less than one-sixteenth of an inch in diameter, Marchetti said, so they don’t crack bricks and they don’t leave noticeable holes if you later decide to pry off a hook.

There is another alternative you may want to consider, especially because you want to change your artwork periodically: Install picture rail, a type of molding, usually around two inches deep, that runs horizontally across the wall. The top edge sticks out from the wall, creating a crevice where you can slip in a special clip that has a hook on the front to hold the wire on the back of a painting or mirror.

Before easy-to-patch drywall replaced lath-and-plaster as the standard wall finish, picture rail was a common part of the trim in living rooms and dining rooms because it allowed people to hang pictures wherever they wanted without having to hammer into the plaster, which could cause cracks.

  • Traditional picture rail is wooden and often installed 12 to 20 inches below the ceiling.
  • Especially in a room with a low ceiling, it can also go nearly against the ceiling or at the lower edge of crown molding.
  • In Craftsman-style interiors, it usually runs at the same height as the upper edge of door and window trim, creating a unified look.

Today, there are also picture rails made of metal, which look especially good in interiors with modern styling. The website carries different styles of molding and picture hangers that work with them. Picture rail would need to be installed securely, which means fastening it to the bricks with nails or screws.

How do you block an external door?

5 Easy Ways to Block Up an External Doorway

You can block up the doorway. There are many different reasons for wanting to fill a doorway, such as moving the door from one part of the wall to another or sealing off a door that you no longer need. Whatever your reasons, the simplest and perhaps the most effective way to fill an external doorway is to block it off with cinderblock or concrete blocks. Advertisement

  1. 1 First, you need to remove the door frame. Start by removing the hinges and taking off the door if you haven’t already. Saw through the jambs until the saw reaches but doesn’t touch the actual wall. Then, use a chisel or a crowbar to pry off the jambs. Once the jambs are removed, use your chisel or crowbar to pry off the wooden frame so you’re left with a clean opening in your wall.
    • Don’t try to block up the doorway without removing the frame or your wall won’t be as strong.
  2. 2 Stack cinderblocks in the opening with frame ties between each row. Cinderblocks are relatively lightweight, strong, and cheap. Install the bottom row of blocks and then screw frame ties to the walls just above the row of blocks and stack another row of blocks on top. Continue stacking blocks and installing frame ties between each layer so your blocks are also supported by the surrounding wall.
    • Use a timber saw to cut any blocks to size.
  3. 3 over the block wall for a smooth finish. Mix your plaster in a bucket and use a hand trowel to spread it over both sides of your block wall to form a base coat. Allow the first layer to dry and then apply a second layer, known as the skim plaster. Make the second layer thick enough so it’s even with the surrounding wall. Allow the plaster to fully dry and harden.
    • Follow the mixing directions on the packaging of the plaster.
    • Check the packaging of the plaster for specific drying and curing times.
  4. Advertisement

  1. You can divide the wall square footage by the block square footage. Measure the opening of the doorway and multiply the width by the height to get your square footage. Then, measure the width and height of your blocks, multiply the values together and divide them by 144 to get their square footage. Once you have both values, you can divide the wall square footage by the block square footage to figure out how many blocks you need to fill the space.
    • The standard cinderblock is 16 inches (41 cm) wide by 8 inches (20 cm) high.
    • For example, if your wall is 3 feet (0.91 m) wide and 9 feet (2.7 m) high, then you’d multiply them together to get 27 square feet (2.5 m 2 ). If you’re using a standard cinderblock, then your block measurements are 16 inches (41 cm) wide by 8 inches (20 cm) high. Multiply those values together to get 128 inches (330 cm), which you then divide by 144 to get,89 square feet (0.083 m 2 ). Finally, divide 27 square feet (2.5 m 2 ) by,89 square feet (0.083 m 2 ) to get 30.33, which you could round up to get 34 cinderblocks.
    • You can also use an online block calculator at:
  1. Yes, many locations require a permit for exterior door replacements. However, the regulations can vary from location to location. Plus, your neighborhood association may have its own regulations that you need to adhere to. It’s always better to be safe than sorry. Before you start blocking up your door, look up the local rules and regulations regarding building permits as well as the bylaws of any neighborhood associations that you’re a part of to see if you need to obtain special permission.
    • If you’re required to get a permit but you choose not to, you could face a hefty fine.
  2. Advertisement

Usually between $475-$655 USD. Of course, the cost can vary depending on the size of your doorway and how many blocks it takes to fill it in. If you do the project yourself, you can save on some labor costs, but if you choose to hire a professional, you’ll have to pay more to cover their costs. Additionally, you may need to pay for special permits, which could also drive up the cost.

Ask a Question Advertisement


Advertisement This article was co-authored by, Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 13,981 times.

  • Co-authors: 4
  • Updated: August 25, 2021
  • Views: 13,981


Thanks to all authors for creating a page that has been read 13,981 times. : 5 Easy Ways to Block Up an External Doorway

Can I convert my garage into a granny flat?

Can I turn my detached garage into a granny flat? – This is a little more complicated – some garages have covenants attached to them specifying that they have to stay as parking, so you’ll have to check your paperwork before you make plans. If you’ve got a detached garage, you are very likely to need to apply for a Change of Use to turn it into a granny annexe, whereas attached garages can often be converted under Permitted Development Rules. How To Brick Up A Garage Door

Can you convert a garage not attached to your house?

Carrying out a garage conversion is the perfect way to add extra space to your home without extending — plus, in many cases, it won’t require planning permission.

Can I brick up an external door?

You can legally brick up your back door when you have a front door and patio door, or similar, that can serve as the two primary means of egress. These means of egress should also comply with the residential building code and local fire safety regulations before you can brick up your back door.

What are the rules about turning garage into room?

What Features Of Building Code Do I Need To Keep In Mind? –

Fire Safety: The fire safety feature encourages to take measures regarding fire accidents, including the construction of safe escapes and installation of smoke alarms. Energy efficiency: The use of natural resources to provide for comfort is also a clause in the Code. You have to introduce adequate lighting, humidity, and ventilation sources to comply with the requirements. Durability: The durability feature stress that the material needs to be used in the building will stay functional until the estimated life of the building. Sanitary measures: You must have to pay attention to all kinds of sanitary fixtures, including water, gas, and electricity. Moisture prevention: You must have to keep an eye on the drainage system for all kind of penetrating and pouring water. Ceiling height: One of the most crucial factors in building a room is the ideal height of the roof. The height of the living room must not be less than 2.4 meters. If the roof of your garage is lower than 2.4 mark, then you may consider raising the ceiling. Lowering the floor could be an option, but it requires more effort and investment.

If the walls of the garage are made of brick then it will require an additional layer of protection using membrane or the weather-resistant paint. The additional membrane will help provide protection against dampness. You can also opt in stud wall if you’re looking to secure electrical wiring and insulation.

In regards to the floor of the garage, you have to ensure that it has waterproof protection to avoid dampness and water retention. The floor of the garage is mostly commonly made of reinforced concrete, and wouldn’t have any additional protection. There are a variety of products available in the market that can help you with waterproofing the floor.

Another thing to consider is ventilation, you may want to introduce more air flow and ventilation by choosing to install a large window replacing the garage door. The requirements for the natural light in the living room have been pen down in the clause G7 of the Building Code.

  • You can measure your natural light requirements using a lux meter.
  • The room will also require additional electrical outlets, which most registered eletricians will be able to do.
  • Make sure to Hire a registered electrician because they will need to provide the necessary compliance certificate regarding all the wiring work that has been done – which will be needed when you’re applying for your Code of Compliance Certificate.

You’ll also need to be aware that converting your garage into a habitable room, you will also need to look at issues with the rainwater. Most of the garages use a slanted floor to drive rainwater outside the garage into the drain. But once you decide to convert the garage into the living area, you’ll need to address the water flow issue – perhaps installing additional drains.

Does converting a garage add value?

1. Convert your garage – If you have off-road parking and depending on where you live, you may find converting a garage can significantly increase your home’s value – by as much as between 10 and 15 percent. If your garage is attached to your house, you should be able to convert it into another room for between £10,000 and £20,000 – but if that doesn’t suit your home or your needs, you could turn it into a playroom, a home office or a gym.

What is the 4 year rule in planning permission?

What is a Certificate of Lawfulness for Existing Use or Development? – Under the Act, a Certificate of Lawfulness is therefore defined as a legal document that regularises unauthorised development. The current 4-Year Rule allows you to make a formal application to determine whether your unauthorised use has become lawful through the passage of time — rather than through its compliance with space standards and other planning requirements.

It therefore allows your use to continue without the need for planning permission. In many ways, this is a desirable alternative to the other option available to you: applying for full planning consent through a retrospective planning application. The burden of proof here is much higher, because a full planning application requires the development to adhere strictly to national and local standards.

Anything that the council could consider a material planning consideration would be of relevance to a retrospective planning application. This could include factors like:

Overlooking/loss of privacy Impact on neighbouring amenity Loss of light or overshadowing Design (bulk and massing, appearance and materials) Layout and density of building Highway safety Traffic generation Parking (vehicle and cycle) Effect on the character of the area Effect on listed building and conservation area Access for emergency services Emergency exits for residents Biodiversity and potential harm to valued plants, insects and wildlife

And that list is not even exhaustive. So, if you have the right evidence and are able to clearly prove that your property has been in continuous use over the designated (4 or 10 year) period of time, then a Certificate of Lawfulness can be a far safer route to take in terms of regularising your permission. How To Brick Up A Garage Door

Can you convert a garage not attached to your house?

Carrying out a garage conversion is the perfect way to add extra space to your home without extending — plus, in many cases, it won’t require planning permission.

How can I turn my garage into a room without removing the garage door?

4. Add a Wall – If your garage is large enough, you may want to consider building a wall a few feet from the garage door. This will allow you to keep the garage door on the outside while adding more insulation and soundproofing to the converted room. The extra space between the new wall and the garage door can also serve as storage space if you add a door.

Can I raise the roof of my garage without planning permission?

Building regulations and planning permission – two terms that can make any homeowner worry. It’s not surprising – there are enough rules, regulations and red tape to confuse even the most seasoned home renovator. So what do you need to know if you need to re-roof or have work done on your existing roof? Do you need planning permission? Do you need to inform your Local Authority Building Control (LABC) ? It is unlikely that you will need to apply for planning permission if you are re-roofing your property.

Alterations must not be any higher than the highest part of the existing roof Any alteration made must not project any more than 150mm from the property’s existing roof plane Windows that are side facing must be obscured. Any opening must be 1.7m above the floor Solar panels have different limits on projections and regulations may differ depending on protected areas. Please ensure you understand the planning and building regulations regarding solar panels before any work commences

 Bats are protected species and any work carried out to a loft or roof may affect them. You may need a survey and if bats are using your property, you might have to apply for a licence. You can contact Natural England for further information and advice.

  1.  If you are re-covering or carrying out repairs to less than 25% of your pitched or flat roof, it is unlikely that you will need to inform your Local Authority Building Control,
  2. However, if you are carrying out structural alterations, replacing or repairing in excess of 25% of your roof’s overall area, or using significantly different materials that will change the way your roof performs in the event of a fire, you will need to submit a building regulations application.

This is exempt in respect to garages or any building that is not heated. To keep things as simple as possible, the Part L 1B section of the UK Building Regulations means that if you replace your flat roof, you will need to notify your Local Authority Building Control and submit an application.

You will then be legally obligated to upgrade the current insulation, which will enable LABC to issue the relevant certificate once work has been completed. Please bear in mind that if you decided to sell your house, you will be required to produce a Local Authority Building Control certificate to prove that your replacement flat roof has been installed in line with current building regulations.

Trying to cut corners could cause significant problems down the line. High-Tech Membrane Roofing is a member of the Competent Roofer scheme – the Government’s authorised Competent Person Scheme for England and Wales. Like FENSA, it enables professional roofing contractors to self-certify that any roof replacement, refurbishment or repair work carried out complies with building regulations.

Do I need building regs to block up an internal door?

Bricking up Side Door – Building Regs? Hi, We are about to commence a house refurb project and we want to brick up the existing back/side door to the house and an adjacent window to expand the kitchen space. There is a bi-fold door to the rear of the house and we are also going to introduce a door between the house and the integral garage, which in turn has a rear door to provide access to the back of the house.

My question is are we ok with Building regs by bricking up the existing door and are we likely to need planning permission or building regs approval for doing such works? Thanks in advance. Best Answer Ideally it’s to contact the Local Authority to verify before you do it. Normally this will be the right way.

Good luck to you! 2019-10-07T11:40:02+01:00 Answered 7th Oct 2019 Good day to you, We have here a few issues, but basically three main ones as follows: A. Internal Blocking / Closing / Bricking up Doors: If the doors are internal, this is not an issue, as long as there is another door to this area, due to the fire regulations (to run out in case of fire).

Also if the door is not a fire escape door, or should I say leading to the fire exit etc.B. External Blocking / Closing / Bricking up Doors: If the door/s are external to the house, and are not fire escape doors, and all the details specified as above, you need to notify building control, as this will alter the house elevation of the property.

Remember, anything that is external, it is always advisable to notify the local authorities about it.C. Creating a new door between House & Garage: This is a very important issue, as you trying to connect a living space area with a potential hazardous area, e.g.

Garage= fuel = fire = smoke = CO2 exhaust fumes etc). The only way you can do this is: 1. The door has to be a 30 min – 60 min. Fire resistance door, including the door frame gasket.2. The floor level between the two areas must vary: e.g the garage floor MUST BE lower (100 mm min.) that the living area (house).

Ideally, you must call out an experience Architect / Surveyor / Inspector for advice. Your best solution, is to take your drawing and go visit your local Council building control team for a quick advice. I hope this answers your questions. Kind regards Gus Barbero 2019-10-07T11:55:01+01:00 Answered 7th Oct 2019 Hi.

  1. You do not need planing permission for that.
  2. You need to serve the council with building notice and they will let you commence the work within 48 hours after the application is been processed then a enginner will come out to see the work and then sign if off.
  3. And the door you was talking about between the garage and the house- my advice is that you contact a construction enginner prior to serving the council with a building notice as you will need proper plans for this in case the wall you breaking into ia a load bearing wall.

Hope this helps 2019-10-07T19:05:01+01:00 Answered 7th Oct 2019

The best thing to do is contact your local building control of planning department like the previous message has said. Every county tends to have different views on things like this depending to wether your in a conservation area or if it is going to effect the look of the street. I have found the most alterations to the rear or a property or internally do not need planning permission but building control will need to be notified under a building notice and they will call at milestones to check the builders quality and method.Hope this helps. Aaron Hay

2019-10-23T10:10:02+01:00 Answered 23rd Oct 2019 : Bricking up Side Door – Building Regs?