How To Keep Your Roof Cool?

How To Keep Your Roof Cool
7 Ways to Keep Your Roof Cool in The Summer

  1. Update Your Attic Insulation.
  2. Paint Your Roof a Lighter Color.
  3. Increase the Shade On Your Roof.
  4. Start a Rooftop Garden.
  5. Consider Solar Reflective Shingles and Tiles.
  6. Install Solar Panels.
  7. Set Up a Roof Misting System.
  8. Tiger Team Roofing – Roofing Contractors Fort Lauderdale.

What can I put on my roof to keep it cool?

Download Article Download Article There are a variety of ways to protect your roof from sunlight and heat. If you have a flat roof, the easiest way to avoid sun damage is to cover your home in a reflective coating. You can also pour gravel or plant a garden to cover your roof and protect it from direct sunlight.

  1. 1 Cover a flat roof with reflective paint to keep the heat off. Cool roof coatings are white or silver paints that are made with reflective pigments. Cool roof coatings are the most commonly-used method to cool roofs because they’re inexpensive, easy to use, and don’t require help from a contractor.
    • In roofing, the term “cool roof” is used to denote a roof that is specifically designed to reflect heat.
    • If your roof is made of shingles or asphalt sheeting, your roof is already designed to reflect heat and should not be painted. If you want to cover a metal roof, get a coating designed specifically for metal.
    • Cool roof coatings are almost always waterproof as well.

    Warning: If your roof sits on an angle, you cannot apply this coating. The coating essentially works like a mirror, and you could blind your neighbors and nearby motorists if your roof is visible from the ground. Painting a pitched roof is often illegal without a license as well.

  2. 2 Pour gravel on your flat roof if you want an added layer of protection. If you have a flat roof, you can add a layer of reflective gravel to protect the roof from sunlight while helping with drainage. Purchase reflective gravel from a roofing company or at a home repair store and take it up to your roof.
    • You cannot add gravel to a roof that doesn’t have a rim around the exterior of the building. If there’s no barrier, your gravel will simply slide off of the roof over time.

    Warning: Do not add massive heaps of gravel. They won’t be as effective as a clean, even layer. Large piles may also become hazardous over time as the weight weighs down your roof. Keep your layer of gravel thinner than 2 inches (5.1 cm) to avoid any structural problems. Advertisement

  3. 3 Plant a garden on your roof if it’s flat and easily accessible. A rooftop garden is a great way to take advantage of the large amount of sunlight while blocking the surface of the roof from the sun. While you won’t be able to completely cover your roof, you will be able to protect a large majority of the surface.
    • Your roof must be structurally sound to handle the weight of a large garden. Contact an architectural or engineering firm to inspect your roof before installing a garden.
    • Most roofs don’t have access to a running supply of water, so you may need to store water on the roof or run a hose up to the roof.
  4. 4 Get a contractor to cover your roof with polyurethane foam if it’s sloped. To waterproof your roof while protecting it from the sun, hire a contractor to install a polyurethane foam on top of your roofing material. The contractors will clean your roof and use an aerosol spray to seal your roof in polyurethane foam.
    • It is illegal to install a polyurethane foam roofing membrane if you aren’t a licensed contractor. You must hire someone to install it for you.
    • Polyurethane foam coatings cost $4-7 per square foot ($13-22 per square meter).
  5. 5 Hire a contractor to install a reflective membrane if you have a sloped roof. Roof membranes are prefabricated sheets that are attached to a roof using fasteners. They reflect sunlight and keep weather from wearing down your roof over time. You cannot install a membrane yourself, so contact a contractor in your area to get quotes for a roofing membrane.
    • This is the best option for sloped roofs that can’t be painted with a reflective coating. However, if you already have an asphalt or shingle roof, you may not see a ton of improvement.
    • Roofing membranes typically cost $4-5 per square foot ($13-16 per square meter).
  6. 6 Get solar panels installed to cool your roof and cut your utility costs. Solar panels are designed to attract sunlight in the area around them. In addition, they physically cover a large portion of your roof, partially shielding it from exposure to the sun. This can lower the temperature of your roof considerably while saving you money at the same time. Buy solar panels if you can afford the upfront cost and want a long-term, sustainable solution to keep your roof cool. Tip: While it can cost $10,000-30,000 to initially install the solar panels, the prices come down every year as the technology improves. They also pay for themselves over a longer period of time as your electric and gas bills go down.
  7. Advertisement

  1. 1 Install radiant roof barriers to insulate your attic. While it won’t limit your roof’s contact with the sun, radiant roof barriers can keep heat off of your roof by limiting the space where the heat can go. Purchase a roll of radiant roof barrier from a supplier and spread it out along your wall.
    • Radiant roof barriers are typically installed in an unfinished attic where there isn’t much interior insulation.
    • Use a utility knife to cut slits into the sheeting to wrap it around any pipes or columns.
    • The barrier doesn’t need to be taut or airtight to work effectively. So long as the majority of your attic’s walls are covered, most of the heat from the sun will struggle to enter your home.

    Tip: This can be kind of tricky to do without the help of friend holding the opposite end of a sheet up. Ask a friend or family member to stabilize the sheets for you as you staple.

  2. 2 Put a fan or AC unit in your attic to improve ventilation. Keeping your attic properly ventilated is an excellent way to naturally lower the temperature of your roof. Install a ceiling fan or set up a large industrial fan in your attic. If you want to cool the attic independently of the rest of your house, install a window unit in a window in your attic.
    • Keep in mind that any of these options will cause your electricity bill to increase. However, your air conditioning costs will certainly go down in the summer.
  3. 3 Install a solar-powered fan to force air through your roof’s vents. There are air gaps built near the floor where your pitched roof meets the floor. To increase the natural ventilation in your attic, get a solar-powered fan designed to push more air through the vent.
    • The benefit of a solar-powered fan is that it will only kick on when the sun is out. This will naturally regulate the temperature in your attic.
    • You can hire a contractor to install one of these fans for you.
  4. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

If your roof isn’t flat, don’t risk getting up on your roof. It’s better to hire a contractor than risk your life to keep your roof cool.


  • Reflective coating
  • Roller
  • Roller extension
  • Screwdriver
  • Reflective gravel
  • Gardening tools
  • Planter boxes
  • Pots
  • Solar-powered fan
  • Fan
  • Air conditioning unit
  • Shovel
  • Radiant barrier sheeting
  • Utility knife
  • Gloves
  • Staple gun

Thanks to all authors for creating a page that has been read 35,692 times.

How do I stop my roof from getting hot?

Top insulation – Terrace gardens will prevent heat absorption. The plants and grass shade the roof. The earth will insulate the roof. Wetness in the mud will certainly cool the roof. However, consult your structural engineer if the roof can carry the garden load and a landscape architect to design a maintenance-easy garden.

Traditionally, “Surkhi”, a mix of brick bat, lime, maravajra (natural adhesive) and Antvalakai (gum fruit) was used as weather proof layer to protect the roof from getting heated. It is not popular nowadays because of lack of skill and know-how. Weather proof clay panels are commonly used for insulation.

Each clay panel comes with three tube-like holes. This void helps to avoid heat transfer. Besides, clay does not absorb and retain heat too much. It is laid over the concrete roof with cement mortar. Foam concrete panels can be used instead of clay panels mentioned above, in a similar manner.

  • The sponge-like perforation in the lightweight concrete block prevents heat transfer to the roof slab.
  • A layer of 40 mm gravel (railway jelly) laid on the roof can effectively prevent the roof from getting heated.
  • The gravel shades the roof by day.
  • The polygonal surface of the gravel makes minimal contact with the roof.

This prevents heat transfer. At night, the gravel gives out the heat to the cool air. The disadvantage of this remedy is that we cannot walk comfortably on the roof to use the terrace. In Jodhpur, Rajasthan, roofs are painted white with lime. White lime reflects a great deal of heat that will otherwise be absorbed by the roof.

  • However, the top will have to be painted almost every year.
  • Many manufacturers use the same technology and offer roof coatings that will last for many years.
  • While some coats are white the others are silver in colour to enhance reflectance.
  • The vendors claim 5 degree reduction of heat.
  • Bituminous sheets with silver coating on one side are available for top insulation of the roof.

They not only reflect heat and insulate but also protect the roof from water leakage. They are about 8 mm thick and have a silver coating on the exposed side. They are glued to the roof with bitumen liquid. Silver coating reflects the heat and the bitumen insulates.

What can I spray on my roof to make it last longer?

What is Roof Maxx? – Roof Maxx is a spray coating which restores shingles’ flexibility and water resistance. Made from soybean oil, Roof Maxx soaks into shingles much like lotion soaks into tired, dry skin. It rejuvenates your shingles, providing the necessary oils to extend the life of your roof.

How much does a cool roof cost?

How Much Does A Cool Roof Cost? – Installing a cool roof may sound great, but any responsible homeowner would want to know, ” How much does a cool roof cost? ” The price of a roofing upgrade will vary wildly, depending on the material used and the design of your home.

Can I insulate my roof myself?

Roof and loft insulation guide

Significant savings on your energy bills Easy and quick to install Keep the heat in your home

A quarter of heat is lost through the roof in an uninsulated home. Insulating your loft, attic or flat roof is an effective way to reduce heat loss and reduce your heating bills. Installed correctly, loft insulation should pay for itself many times over in its 40-year lifetime.

If you plan to use the loft or attic for storage, you will want to lay boards over the joists. Unfortunately, if you only insulate between the joists before doing this, the insulation won’t be thick enough. To get enough insulation, you can raise the level of the floor so you can fit enough mineral wool beneath the new floor level. Insulation stops heat escaping from living spaces, so it will make your loft space cooler, which could introduce or worsen existing damp or condensation problems. If you are installing loft insulation yourself, please keep in mind that you may need to increase ventilation. Get professional advice before installing insulation to see if you can fix any first. An alternative way to insulate your loft is to fit rigid insulation boards between and over the rafters. Rafters are the sloping timbers that make up the roof itself. This isn’t a DIY job, so you’ll need a specialist professional to insulate your roof. Advantages:

The roof space will be warmer than with standard loft insulation, so you won’t need to worry so much about freezing tanks and pipes. You can board the floor for storage without having to raise it to create extra depth.


Insulating at rafter level is much more expensive than most standard loft insulation. As well as insulating the roof, you will have to insulate any gable walls, party walls and chimneys in the loft space. If you leave these uninsulated, then the heat will bypass your new insulation making it ineffective. Insulating at rafter level is fundamentally less efficient than insulating the loft floor. This is because you’ll need to heat a larger volume of air (the air in the loft as well as the air in the rest of the house) and you’ll have a larger surface area losing heat to the outside.

Some companies may offer to fix your damaged or leaking roof by spraying foam insulation directly onto the underside of the roof without fixing the problem first. We don’t recommend that you do this. As with any type of insulation, you need to make sure that the roof is dry and in good condition before adding any insulation. If you want to use your loft as a living space, or it is already being used as a living space, then you need to make sure that all the walls and ceilings between a heated room and an unheated space are insulated.

Sloping ceilings can be insulated in the same way as for a warm roof, but with a layer of plasterboard on the inside of the insulation. Vertical walls can be insulated in the same way. Flat ceilings can be insulated like a standard loft.

Make sure you insulate all the areas of wall and ceiling round any dormer window, and that you use high performance glazing for the window, or for any skylights. As with warm loft insulation, this is not a DIY job. You will need a professional installer to ensure that the insulation is appropriate and complete, and that adequate ventilation is provided where needed. Air needs to flow in and out of your house so it stays fresh, dry and healthy. A good installer will be sure not to block or seal any intentional ventilation. If you’re doing any DIY insulation, be careful that you’re not covering any vents, grilles or airbricks. If your loft is hard to access, you can have blown insulation installed by a professional, who will use specialist equipment to blow appropriate insulation material into any awkward space. They may use mineral wool fibre, treated cellulose or polyurethane foam. A flat roof should preferably be insulated from above. A layer of rigid insulation board can be added either on top of the roof’s weatherproof layer or directly on top of the timber roof surface, with a new weatherproof layer on top of the insulation. This is best done when the roof covering needs replacing anyway. If your flat roof needs to be replaced anyway, you must now insulate it to comply with building regulations. It is possible to insulate a flat roof from underneath, but this can lead to condensation problems if not completed correctly. Installing flat roof insulation could save you similar amounts on your heating bills to loft insulation. The savings will vary depending on how much of the property has a flat roof.

If your loft is easy to access, does not have damp problems and is not a flat roof, you could probably insulate it yourself. In cases where there are damp problems or a more complex insulation system is needed, a professional installer should be used.

Flat roof insulation always requires professional insulation and damp roofs require professional assessment before work can be carried out. Insulating between the joists of your loft will keep your house warmer, but make the roof space above colder. This means pipes and water tanks in the loft space could be more likely to freeze, so you will need to insulate them.

If your water tank is some distance from the loft hatch, you will also need something to walk on for safe access. The cooler air in your insulated loft could mean that cold draughts come through the loft hatch. To prevent this, fit an insulated loft hatch and put strips of draught-excluding material around the hatch edges.

How do I keep my roof space cool in summer?

5. Insulate Your Roof and Loft – If you have ever ventured into your loft on a hot day you may have been greeted by a blast of hot air. Likewise, have you ever noticed how your upstairs rooms get warmer than those downstairs? One reason for this is that as the sun shines on to your roof (particularly if your roofing materials are dark in colour), heat is absorbed and transferred into the loft space.

Is roof spraying worth it?

In this article, I’m going to answer your question using all of my knowledge and experience to the best of my ability. The question I get asked a lot is – are thermal roof coatings worth it? I’m just going to get straight to the point here. In my opinion, painting a roof has one real benefit – it makes your home look more visually appealing to the eye. Roof Coating Are all roof-coating companies scammers? There are legitimate roof painting companies out there who are very good at what they do. They do not make outrageous claims about what their service or product will do for your roof. Genuine roof painting companies can do an excellent job of cleaning your roof and painting it the color you require.

  • Having your roof painted for this reason could be beneficial to you if you are selling your home and wanted your house to be more visually appealing to a potential buyer.
  • Eep in mind any potential roof survey on your home will pick up on the fact that the roof is painted a different colour from the original tile colour.

Building surveyors are wise to the claims of the roof coating companies. The surveyor’s report will have documented what has been done to the roof and will be available for all to see. Are thermal roof coatings a scam? I do not believe thermal roof coatings are beneficial for a roof.

  • Some of the wildly outrageous claims I have heard make me laugh out loud.
  • The best one has to be how you can save up to 40% on your annual heating bill.
  • The roof paint itself has ceramic microspheres of vacuum beads to reflect heat away from the surface it is on.
  • How can thermal paint sprayed on exterior roof tiles possibly keep the heat in your home and stop it escaping? The roof space is meant to have airflow.

Most roofs are designed to have airflow. The whole point of airflow in the roof space is to stop the build-up of condensation. Have you ever noticed the loft is always the coldest place in your house? Why is that? It is important to understand that when tiles are put in place, they are laid in such a way so air can flow underneath the tiles.

  • They are not supposed to be airtight, and they were never designed to be.
  • Spraying paint on the tiles from the outside will do nothing to stop the airflow under the tiles as this is what they were designed to do.
  • I will also make a point of saying warm air will not be trapped inside the loft space either.

Any warm air from your home will escape through other air vents on your roof. Overlapping tiles, small gaps around lead work and even soffit vents, are all ways for warm air to escape. Paint on the tiles cannot prevent the warm air in the loft space escaping.

Airflow in the roof space makes thermal roof paint utterly redundant in my opinion. What is the point? The heat from your house is still going up into the loft space and out of the air vents. The only protective measure that will effectively trap any heat in your home is loft insulation. Cover all of your ceilings in the loft space with good quality insulation.

That will stop the heat from escaping out of your roof. But don’t just take my word for it let’s see what the trading standards have to say about this in the following statement: The trading standards have been made aware of door-to-door salespeople offering roof coating and roof cleaning services.

The door-to-door salespeople claim the special paint used to coat the roof provides thermal insulation. Roof tiles are designed in such a way as to allow air to flow freely through the roof space. There is no evidence in painting the exterior of the tiles that it will improve your home’s thermal efficiency.

Its also been noted that during the preparation stage of thermal paint application process to the roof tiles requires a pressure washer to clean the roof. Pressure washing can damage roof tiles by stripping away the protective surface and lowering the life expectancy of the tiles.

You may also encounter the problem of water finding its way into the roof space. Although it is tempting if you have a low-cost quote the risks far outweigh the benefits of thermal coating systems on your roof tiles. The risks being you stand to waste a lot of your hard-earned money on a product that is unproven to benefit your roof in any way apart from cosmetically.

There we have it, that’s the views of the trading standards. Hopefully, my explanation will crush any wild claims of how having thermal roof coatings applied to your roof will keep the warm air trapped inside. All it will do is lighten your bank account and give you more headaches down the line when it starts flaking.

  1. My advice would be to weigh up replacing the tiles.
  2. Some of the crazy prices I have heard over the years for basically spraying your roof a different color could pay for new tiles easily.
  3. Having new tiles would give you the full life expectancy of the tiles which is between 60 – 100 years.
  4. If energy efficiency was a motivating factor for you to be considering a thermal roof coating, there are far better ways of making your home more energy efficient.

You will be better spending your money on good quality loft insulation to preserve heat in your home. Another option would be to have cavity wall insulation installed. There are government grants available for free loft insulation to be installed providing the criteria is met.

Criteria such as claiming tax credits or having an income of less than £16,190 per year. For more information, you can apply here – If you do choose to proceed to have your roof spray painted with the “special coating”keep in mind that the company will more than likely use a pressure washer on the tiles.

Pressure washers are used because they are much quicker at cleaning the roof than doing it by hand with a stiff brush and trowel. The blasting of the tiles with pressure washing strips the tiles of their protective surface. The lifespan of the tiles on the roof may be reduced. Be Clear About What it is That You Want. Think about how you ended up here in the first place. Where you tempted by a slick salesperson’s false promises of thermal roof coatings? Or was you just interested in roof moss removal and general cleanup to make your roof more visually appealing? There is a massive difference between having a roof cleaned as opposed to having a thermal coating applied to your tiles.

If you would like to have, your roof cleaned up, repaired and painted another colour, by all means, go ahead. If you think a thermal coating sprayed onto your roof tiles is going to reduce your heating bills and protect your roof and make it even better than it was you are sadly mistaken. My recommendation would be to either have your roof professionally cleaned without the use of pressure washers.

Or have your roof re-tiled with new tiles in the color of your choice. I’ve had roofers tell me they could replace all the tiles on a roof for not much more money than the cost of having their roof spray-painted a different color. New tiles on your roof would give you the full life expectancy of the tiles.

Paint sprayed onto your existing roof tiles is not going to improve the life expectancy of the tiles. They are still old tiles under the paint. Would you paint over old wood and kid yourself its like new? Be on Your Guard for Unscrupulous Salesman. Now we know all the facts about roof coatings, now its time to keep on your guard in case you get someone at your door trying to sell it to you.

A dodgy salesperson working for a dishonest roof maintenance company will usually prey on their potential customers by cold calling. Cold calling is knocking on your door unannounced and trying to sell you something. Some of these salesmen do not have a conscience.

All they think about is lining their own pockets. If an older person opens the door then all the better. In their eyes, older people are more vulnerable to their unscrupulous sales tactics. Keep a roof coating salesperson at your door for long enough, and they will start spinning stories about how beneficial his special roof paint is.

Try not to laugh. Many of them will tell you its as good as having a new roof! Let me just clear that up for you. Roof painting does not replace old rusty nails that are as old as the house. Roof painting does not replace the tiles that are probably as old as the house.

  • Painting your roof doesn’t replace old, rotten timbers in the frame of your roof.
  • So how can a bit of paint on the roof make it just as good as a new roof? It can’t.
  • Honestly, these people believe their own lies.
  • Some of these salesmen will tell you anything to get your money.
  • The only thing as good as a new roof is a new roof.

New timber, new tiles, and new nails. When it comes to roof coatings, I have seen and heard all kinds of stories. I have seen paint flaking off roofs in less than 12 months after the paint was applied. I have heard direct from a customers mouth that he was told by a salesman that the special paint they use had the same pigments in it as what they use on NASA space rockets.

Apparently, the same paint reflects the heat away from the space rockets as its traveling so fast through the atmosphere. They literally will say anything. The more outrageous the claim, the more you should be on your guard. One of the most common tactics the dodgy salesmen use is to tell you your roof is in a bad state of decay.

The cheapest way for you to stop this deterioration in its tracks is for you to have this special roof coating applied. It’s no wonder people fall for this sneaky manoeuvre out of fear. The thought of having to shell out a fortune for a new roof is frightening.

  1. It’s not uncommon to hear wild claims such as the roof paint will increase the value of your home.
  2. Another claim is how the special paint can prevent leaks on your roof.
  3. Interesting.
  4. How about having your roof checked over by an honest roofer every 1 – 2 years.
  5. This can prevent leaks on your roof for a fraction of the cost.

Take no notice of these bizarre statements and pay attention to your gut feeling. Roof Coatings Who are the most vulnerable for roof coating scams? Sadly the majority of people who are scammed out of their money are the elderly. Seniors are a lot more vulnerable to the tactics of pushy salespeople. A lot of elderly people are on their own and are too scared to say no.

  • They end up going along with the salesman’s recommendations and suggestions.
  • As you can imagine the higher the price, the salesman gets, the bigger the commission for them.
  • Snakes in suits come to mind.
  • Watch out for the next sneaky tactic that usually follows.
  • It goes like this; the salesman will tell you the roof painting service usually costs £10,000, but today only you can have it done for £5000! Take no notice of this extremely misleading sales tactic.

It’s called pressure sales. The whole point of saying this to you is to put you under pressure so you will part with your money quickly and easily. The sad thing is in many cases these people had ended up with roofs that are in a worse state than when they started.

  1. Some people have said they ended up with paint flaking off the roof within six months.
  2. These people they have spraying the roofs with the miracle paint are unscrupulous cowboys too.
  3. They don’t know what they are doing half the time.
  4. It’s not uncommon to hear people have ended up with more damage on the roof after the paint was applied.

Roof tiles being broken during the roof paint application and not replaced. The broken tiles on the roof is what caused the leaks in the roof when it was raining. There are clear guidelines for applying roof coatings. If these guidelines are not followed correctly, then the finished result will be a disaster.

You should do all you can to make sure you only hire professionals to apply a roof coating to your home. There are legitimate companies out there who will do an excellent job if you would like it cleaning and painting. Unfortunately, there are an awful lot of roof coating scammers who promise you everything and deliver nothing.

These scamming roof painting companies are the ones who use a slimy salesman to knock on your door and lie to your face. Only reputable roof coating companies should be trusted, and they are few and far between. The roof maintenance business is saturated with rogue traders,

  1. Wonder why that is? There must be a lot of easy money to be made.
  2. Read my guide on how to avoid rogue traders.
  3. So do Thermal Roof Coatings Work or Not? The answer is no.
  4. Its a scam with no evidence to back up there claims.
  5. You can read my articles about some of the roof coating scammers out there who have been sent to prison.

Most are in jail for ripping people off with large sums of money and making false claims. Shame on them.

Can you spray foam directly on roof?

5.2.2 Concentrate on air sealing – It is a good idea to paint the room side of the ceiling with two coats of oil-based paint or apply a single coat of latex vapour barrier paint to inhibit vapour movement. Ordinary latex paint is not a suitable vapour barrier. Figure 5-10 Foam board laid between the joists and caulked as an air and vapour barrier Larger image See Section 4, “Comprehensive air leakage control,” for detailed information on sealing all air leaks into the attic. Install polyethylene over top of the joists If the attic is relatively unobstructed with chimneys, plumbing stacks or structural members, consider installing polyethylene directly over the ceiling joists.

This method involves the least number of seams and requires less caulking and stapling than other methods. It also leaves existing insulation in place. However, seal all obvious air leakage paths before laying down the polyethylene. To avoid trapping moisture between the plastic and the ceiling, which might lead to possible wood rot or other moisture-related problems, install a minimum of twice the insulating value over top of the air vapour barrier (i.e.

applying the one-third, two-thirds rule). For example, if the joist height is 89 mm (3 1/2 in.) and contains RSI 2.1 (R-12), install at least RSI 4.2 (R-24) over top of the polyethylene. The main difficulty with this technique involves sealing the barrier to the wall top plate, especially at the eaves where there is little room to manoeuvre.

This area must be well sealed. Spray foam or rigid board insulation can help bridge the gap in this area. Cut rigid board to fit between the ceiling joists and to extend from the exterior wall top plate toward the attic. A second piece of rigid insulation, installed vertically, joins the polyethylene to the horizontal rigid board.

Carefully caulk any joints or seams between materials. Expanding two-part spray foam kits (or the service of a spray foam company) are also very good for sealing areas around joists and boards. Install polyethylene between the joists Where obstructions, such as a truss roof, make the previous method too difficult, install a polyethylene air barrier or low-permeable foam insulation board between the joists.

However, note that this is a lengthy and painstaking process. Remove existing insulation from the area you are working on and set it to one side. Cut foam boards to fit snugly between the trusses. Caulk all edges, gaps and joints. Obstructions, such as electrical wires, will require cuts in the barrier; seal these carefully to make the barrier continuous.

Another option is to cut the polyethylene strips about 200 mm (8 in.) wider than the joist spacing. Lay a bead of caulking on the side of the joists along their length and install the polyethylene using staples, installed through the caulk every 75 mm (3 in.) See Figure 5-10.

  • Spray foam between the joists Spray foam contractors can install closed-cell foam between the joists to air seal and add insulation at the same time to the ceiling.
  • All existing insulation and dust must be removed first to allow for a good bond.
  • A minimum of 50 mm (2 in.) is needed; top up with other insulation afterwards.

Spray foam under the roof This approach involves installing closed-cell spray foam directly under the roof surface, right down to the junction of the ceiling and exterior walls. This eliminates roof venting and creates what is called a hot roof, where the attic space becomes part of the conditioned (heated and cooled) house space.

Can I spray vinegar on my roof?

Ever stood in your garden, looked up at your house and wondered why your roof was full of green patches? Whether you’re doing it for cosmetic or structural reasons, moss can be tough to shift. No worries, though! We’ll show you the best way to remove moss from the roof.

How hot is a roof on a 90 degree day?

(UPDATED) You know how walking across a blacktop parking lot on a sunny day can feel like the temperature just went up 20 degrees? It’s not your imagination – surface material has a lot to do with temperature. Move from the blacktop to the grass and you can instantly feel the difference.

How do you stop heat on a tiled roof?

There are several ways to cool concrete rooftops, and this depends on preference, budget, and space. Homeowners with a rooftop or flat roof made from reinforced concrete know that the attic can be extremely hot. This is because flat roof spaces are always exposed to sunlight and concrete greatly accumulates heat.

When concrete fully absorbs the heat, it will begin the exothermic reaction. Even after sunset, the house remains warm. Here, we will discuss ideas on how to cool your rooftops. Insulations in the ceiling Installing insulations at the ceiling is common due to its simple process that doesn’t involve bothering the roof.

Insulations in ceilings are often made of fiberglass with 1, 2, 3, and 6-inch thickness such as SCG Thermal Insulation and PU foam insulations with both the spray or sheet types. How To Keep Your Roof Cool Heat reflective paint or ceramic coating on the roof Heat reflective paint or ceramic coating consists of borosilicate ceramic powder which reflects heat and UV rays. When applied to the roof, it helps reflect heat from the concrete, thus, reducing heat accumulation. How To Keep Your Roof Cool Solar slabs Solar slabs are 30×30 cm. concrete tiles with 3cm. tall legs in all 4 corners creating empty spaces beneath the tiles. The tiles prevent the roof from direct sunlight while space acts as insulations that prevent heat transfer from tiles to roof. How To Keep Your Roof Cool How To Keep Your Roof Cool Wooden floor on the rooftop Aside from attractiveness, wooden floor rooftops can also cool roofs. Several types of wooden floors are available such as the 30×30 cm. prefabricated wooden floor planks or wooden planks on joists. Wooden floors cool roofs using the same principle as solar slabs. How To Keep Your Roof Cool How To Keep Your Roof Cool A roof over a roof A roof is an umbrella for rooftops. It prevents the roof from direct sunlight while space in between the roofs become insulation and helps with ventilation. This is the best way to cool the roof while also preventing rooftops from leakage. How To Keep Your Roof Cool How To Keep Your Roof Cool How To Keep Your Roof Cool Garden rooftop Aside from being pleasant, garden or green rooftop can also cool the roof. It can alleviate the Urban Heat Island effect that occurs in large cities. However, garden rooftops require special construction techniques and care as gardening involves soil and water. How To Keep Your Roof Cool There are several ways to cool rooftops which depends on homeowners’ preference and budget. Several techniques can be integrated such as a roof over roof, heat reflective paint, and insulations in ceilings. This can help enhance the performance according to the suitability of different conditions.