During certain seasons, the weather in Georgia can become a little too tropical. Heavy rain can give your roof a beating. Here are ten ways to protect your roof and home from the worst rainfall.1. Use Gutters If you don’t have gutters, now is the time to consider installing them.

Without gutters, water can drip off the roof and damage your siding.2. Clean Those Gutters If you have gutters, check to make sure they are free of leaves and debris. A gutter cleaning will prevent dangerous overflow during rainy seasons.3. Check Your Vents Not all vents and soffits in Georgia can withstand the rain.

Heavy rain and wind can drive water up into your attic vents. This can soak the inside of your house. Use vents that have guards designed to prevent this problem,4. Watch out for Your Chimney Your chimney is another potentially weak point on your roof.

It must be properly hooded to prevent rain from seeping down into your home. You don’t want any cracks or weaknesses in the chimney, or rain will make them worse! 5. Clear Away Hanging Tree Limbs Hanging limbs over your roof are a sign of potential danger. They tend to gather even more water, and scatter down debris during storms.

This makes it easy for water to stick around and cause decay problems.6. Ask for a Shingle/Flashing Inspection You want your shingles and your flashing (the metal strips at the boundaries of your roof) to be ready for coming rainstorms. A roof inspection can help you identify loose shingles, rusted flashing, and other roof parts that really should be replaced before they cause harm.7.

Fix Leaks ASAP If you notice brown patches or other signs of leaks inside your home, make a call and start a repair as soon as you can. Those leaks can get much, much worse when the rain comes. The faster you fix it, the more money you’ll save.8. Stop Pooling Water Waters tends to pool on flat roofs. Without proper slope and drainage, this pooled water will linger after every rainfall, and will soon damage your roof.

If you notice pooled water that won’t go away, there’s probably something wrong with your flat roof that needs to be looked at.9. Replace Weak Roofs If your roof is old, or has widespread damage, consider a new installation. This is an expensive option, but you can pick underlayment, shingles and sealants that best fight heavy rain, ensuring your new roof will be far more robust in the future! 10.

How do you slow rain on a roof?

Installing gutters is a common way to handle rain running off a roof — and make life a little easier the next time you come home during a downpour! But if your house doesn’t have gutters, you can install a rain diverter.

What type of roof is best for heavy rain?

Protection from the Elements – Metal roofs feature a system of interlocking panels that protect the house and provide full coverage from and resistance to the elements. Unlike other roofing materials, metal is installed with fewer seams, giving water and moisture less room for intrusion.

1. That makes it the best roof for a rainy climate.
2. Thinking of installing a metal roof as part of a home improvement project? Considering a different type of roofing material for your place of business? We can help.
3. Get in touch with the roofing company that knows all about it — your metal roofing experts at Mountaintop Metal Roofing,

We’ll install a beautiful and customizable roofing system that can last for 100 years thanks not only to its resistance to rain but also to its fire resistance and ability to withstand other extreme weather conditions.

What do roofers install to repel water from your roof?

What is roofing felt paper? – Sometimes called roofing felt underlayment, roofing tar paper, or roll roofing, this is a layer of protection installed between the roof deck and the roofing shingles. Roofing felt is comprised of a base, made from natural materials (such as wood cellulose) or synthetic ones (such as fiberglass or polyester), and then coated or saturated with a protective coating such as bitumen (asphalt), which repels water but still allows the product to breathe.

Is sealing a roof worth it?

Does My Roof Need a Sealant or Coating? – If you have a residential or commercial roof which is flat, it absolutely should be sealed. Flat roofs can turn into pools of water during a heavy rainstorm or prolonged rain event. Although these roofs are designed to drain, rapid accumulations of rainfall can cause sitting water with nowhere to go.

1. This water can quickly find its way to any vulnerability or crack in the roof, causing a or damage to the underlayment.
2. A waterproof roof sealant will assist in keeping all water out until it has the opportunity to drain.
3. Sloped roofs have less problem with standing water for obvious reasons, but some many still benefit from a waterproof roof sealant coating.

If your roof is older, this extra barrier will prolong its life by repelling excess water. You can also treat any roof with a UV-resistant coating, which will protect premature aging of the roofing materials caused by our harsh sunlight. often already contain reflective material in their granules, but an additional coating may help keep their integrity and extend their life span.

How do I divert water from my roof without gutters?

9 Easy Ways to Handle Roof Runoff Without Gutters

1. Try a louver system if you have an overhanging roof. These metal sheets have divots in them that collect water and direct it away from your home. Attach these directly to the siding of your house just underneath your roof, then watch as the rain droplets get pushed out and away from your foundation.
   • These systems are nice because they can’t clog up with leaves or debris like classic gutters do.
   • They’re also unique to the shape of your home, so you can make them fit any way you’d like.
   • However, they can make puddles around your house if you aren’t careful.

Advertisement

1. Use drip edges if your home is still in the construction phase. These flat sheets of metal sit under your shingles to fling rain water out and away from your house. Slide these long pieces of metal under the first row of shingles on your home, then attach them with nails and roofing cement.
   • The materials for a drip edge are usually pretty cheap, but the cost of labor can vary greatly.
   • Drip edges can be a little tough to install if your house is already fully built. However, you can hire a professional to do it for you.
   • You can use drip edges in addition to gutters if you already have them, or you can use them as a replacement.
   • Drip edges also help seal any gaps in your roof so small animals can’t get cozy in your attic.

1. Divert your water with a rain chain if you have a grassy area nearby. Rain chains can be made of copper or aluminum, and they’re usually long, chain-like structures as tall as your home. Hook a metal rain chain onto the side of your home where the water collects the most. As it rains, the water will run down the chain and into the grassy or planted area at the end of the chain.
   • Rain chains usually cost about $40 to $50 depending on which metal you choose.
   • If you have a large roof, you may need more than one rain chain.
   • If you get a lot of freezing weather, stay away from rain chains. The heavy ice can do damage to your gutters.

Advertisement

1. French drains are perfect if your home sits in a dip or a valley. These long stone pathways will carry the water out and away from your home’s foundation. Dig a trench on a slope away from your home, then line it with drainage fabric, fill it with stone, and lay a perforated pipe.
   • The price of a French drain varies, but it usually costs between $2,000 and $3,000 for a full installation.
   • You may need a professional to help with installation. French drains must be installed properly—they are very unlikely to get blocked then. Otherwise, they won’t work.
   • You can disguise French drains with gravel and plants so they add to your yard instead of taking away from it.

1. This system works best if you have an overhang around your whole house. Spend an afternoon figuring out where the water naturally runs off your roof and onto the ground. Dig a trench around all 4 sides of your home that’s 18 inches (46 cm) wide and 8 inches (20 cm) deep, then fill it with non-woven geotextile fabric and crushed stone for an attractive way to collect water.
   • The costs for a drip path vary greatly depending on the size of your home and your chosen materials.
   • The stones and fabric will collect the water so that it doesn’t damage your foundation.
   • However, the path must be installed correctly to ensure it absorbs enough water. Otherwise, you could do damage to your home.
   • You can also add small plants or shrubs to the path to make it look more attractive.

Advertisement

1. Try grading if you have a large plot of land to work with. Use a rototiller to make sure that the land around your home drops 1 in (2.5 cm) for every 1 ft (0.30 m) around your house. This will carry the water away from your home and foundation.
   • The price of grading depends on your contractor and the size of your yard. Typically, you should expect to spend around $2,500.
   • Grading is hard to do on your own, and you may need a professional to ensure that it’s done properly.
   • Grading can tear up a lot of your landscape, so don’t go for this option if you’re attached to your yard.

1. Channel drains work best on flat surfaces, like driveways, walkways, or concrete paths. These metal grates sit in the divots near your home to collect water as it runs off your property. Situate the drain at a diagonal, then pour concrete around it to keep it in place. Attach a pipe under the ground to carry the standing water away from your home.
   • Channel drain materials are pretty cheap (usually around $300), but the installation costs can vary.
   • You can attach a channel drain to a French drain to carry the water away easily.
   • Channel drains may need a professional installation if you aren’t comfortable installing pipes underground on your own.

Advertisement

1. If you don’t have overhangs on your roof, built-in gutters are an option. These gutters sit flush with your roof and don’t have openings for leaf litter or debris to get in. Attach the gutters to your roof and make sure they’re flush with the surface of your home.
   • The materials for built-in gutters usually cost around $50 per square foot.
   • Always get an experienced roofer to install built-in gutters. They take a little more installation than normal gutters do, so they need an expert.
   • Built-in gutters can also be tough to maintain. If you decide to go this route, prepare to spend extra money on them throughout the years.

1. Use this garden in conjunction with another gutter replacement. Pick a spot in your yard that’s on a downward slope or at the bottom of a hill. Fill the area with wetland plants that will soak up water as your rain runoff rolls down the hill.
   • Typical rain gardens are connected to a downspout, but you can divert a drip path, a rain chain, or a french drain to them instead.
   • The price of a rain garden depends on how large of an area you’re working with and how many plants you purchase.
   • It’s super important that your rain garden is on a downward slope so that the water doesn’t run back into your foundation.
   • The plants you need depend on the area that you live in. In general, swamp and wetland plants do well in rain gardens, while desert plants do not.

Advertisement

Ask a Question Advertisement

⧼thumbs_response⧽

Advertisement

⧼thumbs_response⧽

Advertisement Co-authored by: Professional Plumber & CEO of Balkan Sewer & Water Main This article was co-authored by and by wikiHow staff writer,, David Balkan is a Professional Plumber, CEO of Balkan Sewer and Water Main Service, and President of Balkan Sewer and Drain Cleaning.

As a hands-on owner of these companies for over 40 years, David is knowledgeable about water service lines, sewers, and drain line issues. David is a Committee Chairman of the Master Plumbers Council and has sat on the Executive Committee of the Sub Surface Plumbers Association of New York for over 30 years.

His knowledge and solution-oriented approach contributed to Balkan Sewer and Water Main Service being the largest and most trusted service in New York City and the recipient of the 2017 Angie’s List Super Service Award. This article has been viewed 56,238 times.

• Co-authors: 7
• Updated: July 28, 2022
• Views: 56,238

Categories: |

Thanks to all authors for creating a page that has been read 56,238 times. : 9 Easy Ways to Handle Roof Runoff Without Gutters

What is a rain diverter?

Moving Water Sideways – Rain diverters are a simple, formed strip of metal fitted beneath the roof surface to direct water sideways. These are often placed on the roof above the home’s front entry. There, the diverters shift water away from the doorway, keeping people dry as they enter or exit the home on rainy days.

Can you waterproof a roof in the rain?

Can You Apply Roof Tar in The Rain? – The short answer is that, yes, you can tar a roof in the rain. If you use a rubberized tar that specifically can be applied in the rain and the surface area is clean just before applying it, the tar could adhere to the roof.

However, this is a bit more complicated than a simple yes or no answer. The longer answer is that you should try to avoid applying the tar in the rain if at all possible. Because most roofing tar is an oily, dark mixture that is made from petroleum byproducts and coal tar, it is already slick in nature.

If there is rain and you are not using rubberized tar, there is a very good chance that the tar will not adhere to the surface that it is being applied. Ideally, you will have a few consecutive days of sunshine without snow or rain before you tar the roof so that the tar has time to cure. An ideal temperature is also, though you can apply the roofing tar at lower temperatures. In hotter temperatures, the roofing tar could start drip, creating a nightmare of a mess to clean up.

Which roof covering is most likely to last the longest?

Roofing material that lasts the longest are concrete, clay or slate tiles. These materials significantly outperform other natural products like wood shakes or any manufactured roofing materials including asphalt shingles and metal roofing. Although these materials have a good lifespan, they are not as durable.

What is the most durable roof covering?

What Roofing Material Is Best for the Elements? – If you live in a climate prone to strong winds, heavy rain or snowfall, or strong UV rays, you’ll want a roofing material that can stand up to the elements. Corrugated galvanized steel is one of the strongest, most durable roofing materials, since it lasts longer, is more resistant to wind, and absorbs less heat than asphalt shingles.

What is the best waterproof underlayment for a roof?

Rubberized Asphalt –

Best for : Premium roofing protection, leak prevention, and extreme temperatures

Rubberized asphalt is a top-quality option that provides the highest level of waterproofing. Install this underlayment material around leak-prone areas, like eaves, valleys, vents, chimneys, and skylights, to help prevent water damage before it can become a problem.

The underlayment is made primarily of rubber polymers and asphalt, but the exact composition varies from product to product. This variability allows manufacturers to slightly alter the design to provide improved waterproofing, fiberglass reinforcement, or even sound absorption. Additionally, if rubberized asphalt is damaged or there is a leak, it can be patched, though the outer roofing layer will need to be partially removed for access.

However, the drawback to installing this type of underlayment is that it is the most expensive type, so if you are looking for a way to cut costs, rubberized asphalt underlayment isn’t the right choice. Rubberized asphalt roof underlayment is also known as self-adhering underlayment because it comes with an adhesive backing that sticks directly to the roof deck.

Is peel and stick roof underlayment worth it?

Peel and Stick Underlayment is Stronger than Traditional Solutions – Unlike asphalt underlayment, which tends to crack and tear, peel and stick underlayment is more flexible and durable. Since it’s so simple to install, the risk of improper installation is minimal.

• The entire installation process is more likely to go smoothly.
• In areas prone to strong wind and rain, peel and stick underlayment is always a better choice compared to traditional solutions like asphalt.
• Peel and stick is significantly more efficient in minimizing the risk of water infiltration and damage.

Depending on where you live, the building code might require you to install peel and stick underlayment specifically. The Florida Office of Insurance Regulation guidelines states if you want to qualify for a Secondary Water Resistant discount on your insurance, you must use a peel and stick underlayment bonded directly to the roof’s sheathing.

What is the best roofing underlayment?

3. Synthetic Underlayment – This is currently the most popular choice for roof underlayment, and with good reason. Made with an asphalt-saturated basemat and fortified with a mix of fiberglass, this product is not only extremely water-resistant, much stronger and more resistant to tears than other types of underlayment.

How much does it cost to waterproof a roof?

The average cost to seal a roof is $1,296 and typically ranges between $461 and $2,134. However, you may pay as little as $100 or as much as $3,200 or more. That’s a total average of $0.65 to $5 per square foot. The type of roof, sealant used, your current roof’s condition, and your location all affect price.

Does painting a roof help seal it?

Is roof restoration the same as roof sealing? – The roofing industry is unfortunately rife with high pressure sales people and companies that really just want to make a sale whether or not the nature and type of work being sold represent good value for their potential client.

• Some roofing companies really try to baffle their clients by mixing terminologies and dramatising the type of work that is required and the potential ramifications to their roof if they don’t go ahead.
• In our many years of experience with undertaking roof restorations in Adelaide one of the most common questions we get asked is ” is a Roof restoration the same as roof sealing? ” or ” will the roof be sealed during the painting process? ” The answer to both these questions is yes.

There are some companies advising their clients that their product “seals” the roof whereas a conventional roof restoration or roof painting will not. This unfortunately is not correct and just a good example of roofing sales people mixing terminologies in order to confuse a client and make a sale.

Can you spray seal a roof?

Type of Existing Roof – Spray on roof coatings are applied as a liquid and dry naturally over 8 to 24 hours depending on the weather conditions. This is why roof coatings are designed for flat or low slope roofing systems (less than 14 degrees slope angle). The most common flat or low slope roofing systems include:

• Asphalt (Built-Up)
• Modified Bit
• Concrete
• Single-Ply Membrane
• Metal (can be low or steep slope)
• Spray Polyurethane Foam

Do you have a steep slope roof (shingles, cedar shake, slate, tile, etc.)? Don’t give up yet! You should still contact your contractor to see if they can help you. Our team at West Roofing System applied a silicone roof coating on this steep slope metal roof in Alabama. Silicone Restoration Membrane for Commercial Roofs