The Type Of Roof Which Slopes In Two Directions?

The Type Of Roof Which Slopes In Two Directions
Gambrel roof Gambrel roof has two direction. A roof which slopes in four directions is called Mansard roof.

Which of the roofs slopes in two direction?

Gambrel Roof – Slope on two directions but there is break in slope.

What do you call a roof that slopes from two sides only?

What is a Gambrel Roof? – Gambrel roofs – also referred to as barn roofs or barn-style roofs – are similar to mansard roofs in several ways. However, unlike a mansard roof, gambrel roofs only have two sloped sides instead of four, resulting in a roof that is somewhat triangular as opposed to square or rectangular. This type of roof has a steep lower slope that is almost vertical, a gentler upper slope, and they also offer some storage or extra living space in the form of an attic, loft, or garret.

  • While the name comes from the Latin “gamba” or the French “gamberal”, meaning a horse’s hock or leg, that name for this type of originated in the United States, with the European name for the style being “curb” or “kerb” roof.
  • Gambrel roofs are often used on Dutch Colonial or Georgian style homes, along with barns and barn style homes, log cabins, farmhouses, and even exterior buildings like sheds and separate garages.

They can have a rustic feel or a more elegant look, making them one of the more versatile styles of roof. Windows or dormers are a common addition to a gambrel roof as they supply natural light to the garret or loft area under the roof as well as improving the general aesthetic appeal of the property, but they do also increase the chance of a roof leak repair, so it is important to get regular inspections and check the flashing around the windows if you have a gambrel roof with dormers or similar architectural details.

This type of roof has become popular because not only are gambrel roofs visually attractive and efficient, they are relatively simple to construct. Gambrel style roofs only require two roof beams along with gusset joints, so the low cost of materials helps to keep the budget realistic. Wood shingles, asphalt shingles, or slate are commonly used for gambrel roofs, but many types of metal roofing are also a good choice and may decrease the need for repairs.

If you are considering building a gambrel roof on your property or buying a home or building that has a gambrel roof, you should know that this style of roof is not recommended for areas that receive heavy snowfall or regularly experience high winds or windstorms, since the more open design can cause a roof to collapse under pressure.

Which is the common type of sloping roof which slopes in two direction and meeting the reach at end face of vertical triangle is formed?

Basic Civil Engineering Questions and Answers – Roof Types

  • This set of Basic Civil Engineering Multiple Choice Questions & Answers (MCQs) focuses on “Roof Types”.
  • 1. Roof may be broadly classified into: a) 2 b) 3 c) 5 d) 6
  • View Answer

Answer: b Explanation: The three types are sloping roofs, flat roofs and shell roofs. They can be used according to the place of construction and requirements.

  1. 2. The lowest edge of the sloping surface of roof is called: a) Ridge b) Rafters c) Pitch d) Eves
  2. View Answer

Answer: d Explanation: Ridge is the apex line of a sloping roof. Rafters are wooden members extending from ridge to eves. Pitch is the inclination of the sloping roof to horizontal.3. _ Roof has four sloping sides with zero vertical roof lines. a) Gable b) Gambrel c) Hip d) Shed View Answer Answer: c Explanation: Hip roof is difficult to construct compared to flat and gable roof because these have complicated truss and rafter structure.4.

  1. The figure below represents a _ roof.
  2. A) Butterfly b) Bat c) Prismatic d) Conoid View Answer Answer: a Explanation: It is type of shell roof.
  3. The two sides are shaped like wings of a butterfly, hence the name.
  4. It is not commonly used because it does not provide drainage facility.5.
  5. Ridge piece in a sloping roof is usually a: a) Metal b) Wood c) Polymer d) PVC View Answer Answer: b Explanation: Ridge piece runs horizontally at the apex.

Rafters are then affixed on to this. It is usually a wooden piece or board.6. How many types of sloping roofs are available? a) 2 b) 10 c) 5 d) 6 View Answer Answer: d Explanation: There are 6 types of sloping roofs available. They are steel sloping roofs, lean-to-roofs, couple roofs, couple close roofs, collar beam roofs and trussed roofs.7.

  • Timber trusses can be built for long spans.
  • A) True b) False View Answer Answer: b Explanation: Steel trusses are mostly used for longer spans.
  • These are easy to fabricate, install and maintain.
  • They have higher resistance to fire, corrosion (painting) etc.8.
  • A finishing coat with _ ratio is provided in Punjab terrace roofs.

a) 1:4 b) 1:2 c) 4:1 d) 2:1 View Answer Answer: c Explanation: The finishing coat primarily consists of cow dung and cement mixed together. They are taken in 4:1 ratio, that is 4 parts cow dung to 1 part cement.9. Which of the below roof types can be used for a span of 4.5 m? a) Couple close roof b) Lean-to-roof c) Couple roof d) Collar beam roof View Answer Answer: a Explanation: Lean-to-roof is usually employed for a span of 2.5m.

Couple roof is provided where a span of 3.5m is required. Collar beam roof can be used up to the span of 4-6m.10. A gable roof slopes in _ direction. a) 1 b) 3 c) 2 d) 4 View Answer Answer: c Explanation: A gable roof slopes in two directions in such a way that the end formed by the intersection of slopes is a sloped triangle.

It is commonly used in houses, workshops, etc.11. How many layers of flat tiles are placed in Madras terrace roofs? a) 2 b) 4 c) 0 d) 3 View Answer Answer: d Explanation: In Madras terrace roof, firstly wooden joists are placed over steel joists or walls.

Then, a course of well burnt bricks is placed in the lime mortar, followed by a layer of brick bat concrete. Then 3 layers of flat tiles in the lime mortar (1:2) is provided and the roof is finished with 3 coats of plaster.12. Which of the below is the type of folded plate roof? a) Prismatic b) Cylindrical c) Corrugated shell d) Ellipsoidal View Answer Answer: a Explanation: Folded plate roofs may be defined as slabs with folds.

These folds reduce bending moment and shear force considerably. Cylindrical, Corrugated shell and Ellipsoidal are types of shell roofs. Sanfoundry Global Education & Learning Series – Basic Civil Engineering. To practice all areas of Basic Civil Engineering,,

  • Get Free
  • Participate in
  • Become a
  • Take
  • Chapterwise Practice Tests:
  • Chapterwise Mock Tests:

, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry, He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at, Subscribe to his free Masterclasses at & technical discussions at, : Basic Civil Engineering Questions and Answers – Roof Types

Which is the common type of sloping roof which slopes in two directions and meeting at the ridge at the end face?

Different sloping roof types and applications! Sloping roofs are in demand as they bear great aesthetic and distribution of wind pressure. They can accelerate the rate of water run-off, they also reduce the likelihood of a build-up of debris, mold and mildew.

  1. At the same time, they are less likely to experience staining from acid rain or UV degradation.
  2. Owners and architects who appreciate the roof’s aesthetic appeal, long service life, low maintenance requirements, lightweight and resistance to wind, this type of rof is a great option for them.
  3. Sloping roofs can have a variety of shapes and styles depending on the needs and aesthetics, discussed below are few of the types of sloping roof available.
You might be interested:  What Color For A House With A Brick Metal Roof?

Gable roof A gable roof consists of two roof sections sloping in opposite directions and placed such that the highest, horizontal edges meet to form the roof ridge. The design of this type of roof is achieved using rafters, roof trusses or purlins. The pitch of the roof and the height of the gutters can vary greatly.

The gable roof is used in many regions of the world. In regions with strong winds and heavy rain, gable roofs are built with a steep pitch in order, for example, to prevent the ingress of water. By comparison, in mountain and alpine regions, gable roofs have a more shallow pitch, because this supports snow better and reduces the risk of an uncontrolled avalanche.

Another reason is that due to its high insulation qualities the snow layer acts as insulation against heat loss during winter time and this insulation layer remains atop the shallow roofs longer than on steeper angled roofs. The Type Of Roof Which Slopes In Two Directions Stratco Outback Gable Roof Melbourne Saw-tooth roof A saw-tooth roof is a roof comprising a series of ridges with dual pitches either side. The steeper surfaces are glazed and face away from the equator to shield workers and machinery from direct sunlight.

  1. This kind of roof admits natural light into a deep plan building or factory.
  2. The sawtooth roof, with its glass panels facing away from the equator, blocks the light and heat of direct sun exposure and provides uniform, natural light over a large area.
  3. It is particularly useful in design factories and manufacturing buildings.Sawtooth structures show apertures with vertical or angled glazing installed in a sloped roof plane.

Sawtooths are most effective when used in series of three, and were historically used in industrial and manufacturing buildings as the primary light source. The Type Of Roof Which Slopes In Two Directions Office with saw-tooth roof Saltbox roof A Saltbox Roof is an asymmetrical two-sided roof with one side sloping down to the first floor of the building and the other side sloping to the usual roof height on the second floor. These roofs are also known as Catslide Roofs where one side extends below the main eave of the roof.

Very similar style to a Gable roof however, it is the asymmetrical sides that differentiate the two. The slope that reaches the first floor is typically longer and has a shallower pitch than the other side, making the house look lopsided. This unique look is what keeps designers and architects intrigued by this style of roof, even today.

Due to the unusual shape, Saltbox Roofs tend to have a chimney starting from the centre of the lower floor. However, it is possible to place the chimney anywhere along the roof, depending on where your fireplace is situated. The Type Of Roof Which Slopes In Two Directions Modern framing of saltbox roof Hyperbolic paraboloid roof A hyperbolic paraboloid roof is a doubly-curved surface that resembles the shape of a saddle, that is, it has a convex form along one axis, and a concave form along the other. It is also a doubly-ruled surface, that is, every point on its surface lies on two straight lines across the surface.

Horizontal sections taken through the surface are hyperbolic in format and vertical sections are parabolic. The use of hyperbolic paraboloids as a form of thin shell was pioneered in the post-war era, as a hybrid of modern architecture and structural engineering. Being both lightweight and efficient, the form was used as a means of minimising materials and increasing structural performance while also creating impressive and seemingly complex designs.

Hyperbolic paraboloid shell roofs can be constructed using reinforced concrete with a shell thickness of just 50 mm for diagonal spans up to 35 m. The Type Of Roof Which Slopes In Two Directions Hyperbolic paraboloid roof structure Mono – pitched roof A mono-pitched roof is a single-sloped roof surface, often not attached to another roof surface. This is in contrast to a dual-pitched roof, also known as a gabled roof, which is pitched in two different directions.

A mono-pitched roof can be a smaller addition to an existing roof, where keeping to the same slope (roof pitch) puts the mono-pitched roof lower than the ceiling height of the main structure. In this case, even though the main roof has a flat ceiling, the mono-pitched part has a sloping or raked ceiling line to maximize the ceiling height.

The name lean-to roof comes from this form of addition. Mono-pitched roofs can be used to provide clerestory windows for a hallway or similar room where a row of windows is placed below the edge of the mono-pitched section reaching above the other roof below. Weather protection schematic of mono-pitched roofs Gambrel roof A gambrel is a usually symmetrical two-sided roof with two slopes on each side. The upper slope is positioned at a shallow angle, while the lower slope is steep. This design provides the advantages of a sloped roof while maximizing headroom inside the building’s upper level and shortening what would otherwise be a tall roof.

This design is commonly used for barns and stables due to the shape allowing for extra storage room. This style of roof is also frequently found in churches and houses.When being used as a habitable space, Gambrel roofs will need windows to increase the amount of natural light and make the room feel bigger.

Windows are easy to install into a Gambrel roof due to the shallow, lower slopes which act as walls for the windows to be mounted on. Often, roofers will choose to install dormer windows to provide greater structural integrity however windows can be installed directly into the slopes of the roof. Gambrel roof truss design Mansard roof A mansard roof is a four-sided gambrel-style hip roof characterized by two slopes on each of its sides with the lower slope, punctured by dormer windows, at a steeper angle than the upper. The steep roof with windows creates an additional floor of habitable space and reduces the overall height of the roof for a given number of habitable stories.

The upper slope of the roof may not be visible from street level when viewed from close proximity to the building. The mansard style makes maximum use of the interior space of the attic and offers a simple way to add one or more storeys to an existing (or new) building without necessarily requiring any masonry.

Often the decorative potential of the mansard is exploited through the use of convex or concave curvature and with elaborate dormer window surrounds. Mansard roof Pyramid roof A pyramid roof is a type of hip roof that has four sides that are all triangle shaped and all slope downward. They are built onto a square or rectangular frame. Pyramid roofs are a popular choice for a shed, gazebos, and summerhouses as they are a modern eye-catcher and definitely stand out from other roof types. Pyramid roof design Butterfly roof A butterfly roof is a form of roof characterised by an inversion of a standard roof form, with two roof surfaces sloping down from opposing edges to a valley near the middle of the roof. Because of their unique design, butterfly roofs are extremely aerodynamic and are able to resist wind damage from coastal winds and heavy storms. Butterfly roof drawing Conclusion Sloping roofs are efficient, aesthetically pleasing and functional. Factors such as weather, costs, wind blow range should also determine the type of roof you should get. Image Source installaveranda.com.au, decor aid, DigsDigs, Wiki, William.T. Braker, Fraemohs homes, flickr, pinterest, Dezeen, : Different sloping roof types and applications!

What is the slope of butterfly roof?

This type of roof can be designed in all angles but, most commonly an angle of inclination within the range of 15-30 degrees is used.

Which of the following groups slopes Two direction?

Correct answer is (b) Gable roof Best explanation: Gable roof slopes in two directions. These two slopes meet at the apex line. Hip roofs and mansard roofs slope in four directions while lean-to-roof slopes in one direction only.

What is slope roof called?

Pitched Roof or Sloping Roof.

Which roof type has two different slopes on each side of the ridge?

Types of Hip Roofs – There are several types or styles of hip roofs:

Pyramid hip: The simplest hip roof is a pyramid hip or square hip roof. This roof looks like a pyramid, making a single peak at the top. Basic hip roofs will instead have a ridge (as shown on the hip roof above). When a pyramid roof sits on top of a gazebo or other garden structure it is called a pavilion roof.

You might be interested:  How To Repair A Slate Roof?

The Type Of Roof Which Slopes In Two Directions

Mansard roof: For this roof style, each side of the roof has two slopes. The bottom slope is steeper than the top slope.

The Type Of Roof Which Slopes In Two Directions

Combination: A combination roof is the opposite of the mansard. It flares out at the bottom all of the way around the roof. The lower level of the roof is at a much lower pitch.

The Type Of Roof Which Slopes In Two Directions

Hip and valley: This variant of a hip roof includes valleys. Valleys are spots where two roof planes meet and project downwards. Hip and valley roofs have been popular in recent years.

The Type Of Roof Which Slopes In Two Directions

Which roof type has two slopes each of which changes pitch in a convex manner?

Mastering Roof Inspections: Roof Styles by Kenton Shepard and Nick Gromicko, CMI® The purpose of the series “Mastering Roof Inspections” is to teach home inspectors, as well as insurance and roofing professionals, how to recognize proper and improper conditions while inspecting steep-slope, residential roofs.

  • asphalt composition shingles;
  • wood shakes and shingles;
  • metal roofing;
  • clay and concrete tile; and
  • slate.

Although each of these articles covers the basics, they also go into detail. Information was pulled from a wide variety of sources, including the home inspection and insurance industries, and various sectors of the roofing industry. In development, we worked with consultants, contractors, suppliers and manufacturers.

Although we’ll be using common terms, the same things can have different names in different parts of North America. The term “roof-covering materials” refers only to the visible roof-covering material, such as the shingles, tile, metal or slate, which form the primary roof covering. It doesn’t include other roofing materials such as underlayment or flashing.

The term “roofing materials” includes everything attached to the roof deck We’re going to start by identifying some basic roof styles and features. Gable The Type Of Roof Which Slopes In Two Directions Gable roofs are one of the most common styles. They’re easily identified. They have two slopes and the ridge extends the length of the home. The lower, level edges of the roof are called the “eaves,” and the sloped edges are called the “gables” or “rakes.” (We use both terms.) Hip The Type Of Roof Which Slopes In Two Directions There are two types of hip roofs, and both have four slopes. The basic hip roof has a level ridge, but the ridge doesn’t extend all the way to the exterior walls. Instead, hip rafters slope diagonally down to each corner. The Type Of Roof Which Slopes In Two Directions The photo above shows a “full hip” roof. Full hip roofs have no real ridge. The hip rafters all meet to form a point at the peak of the roof. Mansard The Type Of Roof Which Slopes In Two Directions Mansard roofs were invented by the French when owners were taxed by the height of the building as measured to the roof eave. They’re short, steep roofs installed around the perimeter of what’s usually (but not always) a flat-roofed building. The Type Of Roof Which Slopes In Two Directions Some of these roofs are nearly vertical, and this can cause installation problems which will vary with the different types of roof-covering materials. Flat The Type Of Roof Which Slopes In Two Directions “Pitch” is the term used to describe the degree of roof slope. Flat roofs have one slope but very little pitch. A typical pitch would be ¼-inch per foot. Flat roofs may drain over the roof edges or through scuppers installed in a parapet wall built around the perimeter. The Type Of Roof Which Slopes In Two Directions Shed roofs have one slope but more pitch than a flat roof. Because shed roofs are often used for additions, one potential problem area is along the upper edge of the shed roof where it ties into the wall of the original home. Gambrel The Type Of Roof Which Slopes In Two Directions Gambrel roofs are usually associated with barns but are not uncommon on homes. They have two slopes, each of which changes pitch in a convex manner. The point at which the roof changes pitch should have metal flashing. This barn is located in an area so windy that whenever the wind stops blowing, all the chickens fall over. Bonnet The Type Of Roof Which Slopes In Two Directions Bonnet roofs have a change of pitch but are concave – the opposite of a gambrel. Butterfly Roof The Type Of Roof Which Slopes In Two Directions This is a style seen less often, but you will see them occasionally. When you inspect a home with a butterfly roof, look closely at the ceiling and floor beneath the low point. The house in this photograph had recently sold and the sellers had hired a contractor to install a new roof.

  • ROOF FEATURES
  • Clerestory

These photos show roofs with clerestory windows. Although the term “clerestory” refers to the position of the windows, it also generally describes their position as incorporated into a shed roof. In other words, “clerestory” is commonly used to refer to the combination of roof and windows.

  • Clerestory windows should have adequate clearance between the sills and the roof below in areas with heavy snowfall.
  • This home doesn’t and is more likely to leak.
  • They should also have proper sidewall flashing.
  • Cupola Cupolas are small structures built into the peak of a roof, often to provide light to the area below.

The inspection concern is the roof framing supporting the cupola. Although the framing will typically be hidden behind interior wall-covering materials, look for signs of movement, such as cracking. Other vulnerable areas are headwall and sidewall flashing.

  1. Installing round conical roofs requires special roofing techniques to get shingles to lie flat, especially near the peak.
  2. In this photograph, you can see that four tiny dormers have been installed near the peak.
  3. Inspecting these steep roofs closely is difficult (or impossible) without special equipment, so you should get as close as you can using binoculars to look for signs of leakage beneath these roofs.

Inspection concerns include flashing at the round sidewalls and areas at which conical roofs intersect with roofs of other shapes. Specially-shaped crickets or flashing may be needed to provide long-term protection against leakage. Crickets are shown here outlined in red.

  • These areas of intersection (which are difficult to see because they’re on the backside of the roof) often collect debris, such as leaves and sediment.
  • This debris holds moisture against the roof and flashing, which often corrodes more quickly than on the rest of the roof.
  • So, the areas of intersection are difficult to see, and they’re weak point,.

If you can’t confirm the condition of the roofing on the backside of a conical roof, you need to disclaim it and recommend inspection by a qualified roofing contractor. A contractor may need to hook a ladder over the ridge in order to get high enough on the roof to see the backside of a conical roof clearly.

  • Dormers

Dormers are projections built into the slope of a roof. Here, you see dormers with gable, hip and shed roofs. Inspection concerns are valleys, headwall and sidewall flashing. Other Roof Combinations and Styles You’ll often see several roof styles combined on one home.

And sometimes you’ll see roof styles for which there really is no name. The structure above is a dormer because it’s a projection built into the slope of a roof. The structure below is a second story, since the exterior wall is continuous from foundation to roof. The only limitations to the number of styles possible are the human imagination, the laws of physics, and the depth of the homeowner’s pockets.

Each different style of roof and roof feature has its weak points. Once you learn what these are, you’ll know where to expect problems. With all roofs, weak points are:

  • places where roof-covering materials change;
  • places where the roof changes direction;
  • places where materials are used that have a relatively short lifespan;
  • roof penetrations; and
  • portions of the roof that lie in the drainage path.

************************************************** Learn how to master a roof inspection from beginning to end by reading the entire InterNACHI series:

Take InterNACHI’s free, online,

: Mastering Roof Inspections: Roof Styles

What type of roof has two sides sloping down toward the interior of the house?

Gambrel – Gambrel roof styles are symmetrical two-sided panels with slopes on each side. Their design takes in the advantages of sloped roof angles while lengthening headspace inside a building’s upper level while diminishing what would otherwise be a tall roof.

What is the highest line of the sloping roof where two opposite pitch slopes meet?

What are the common parts of a roof? –

Roof Ridge: The roof ridge, or ridge of a roof is the horizontal line running the length of the roof where the two roof planes meet. This intersection creates the highest point on a roof, sometimes referred to as the peak. Hip and ridge shingles are specifically designed for this part of a roof. Ridge vent: A ridge vent is an exhaust vent that runs horizontally along the peak of the roof allowing warm, humid air to escape from the attic. Use our ventilation calculator to calculate your attic ventilation requirements and determine how much exhaust ventilation you would need to properly ventilate your roof and attic. Flashing: Flashing is a metal material installed at joint openings, around chimneys, and any dormer windows or skylights to help prevent water intrusion. You may recognize flashing as metal stair steps alongside a chimney or side walls on a roof. Hip: The hip on a roof is the intersection of two roof planes that meet to form a sloping ridge running from the peak to the eave. Hip and ridge shingles are specifically designed for this part of a roof. Roof Deck: The roof deck is the structural foundation base for the roof system and is usually made of wood or plywood. Roofing Underlayment: Roofing underlayment is a layer of material, usually synthetic or felt, that adds extra protection on top of the roof deck and under the shingles. Synthetic underlayment helps repel moisture and provides protection against water infiltration. Synthetic underlayment is becoming a popular material choice over felt due to proven water-resistance performance and long-lasting durability. Roof Valley: The roof valley is the V-shaped intersection between two sloping roofs joining at an angle to provide water runoff. Laminated Architectural Shingles: Laminated architectural asphalt shingles contain more than one layer of tabs to add dimension, performance and durability to a roof. Architectural shingles are sometimes referred to as three-dimensional shingles or laminated shingles. The opposite of architectural shingles are three-tab shingles, which are produced as a single layer of tabs and appear flat or without the dimension of a laminated shingle. Roof Gable: A roof gable is the triangular section of the outer wall at the peak of the roof between a sloping roof and eave. A roof gable is sometimes referred to as a rake. Metal drip edge: Metal drip edge is a narrow strip of noncorrosive metal used at the rake and eave to help manage dripping water by facilitating water runoff to protect the underlying section of a wall. Dormer : A dormer is a raised section of the roof. Dormers commonly contain a window that projects vertically through the slope in the roof. Ice and water barrier: An ice and water barrier is a self-adhered waterproofing material installed along eaves, valleys, side walls, and other sensitive areas to protect against ice damage and wind-driven rain. Eave: An eave is the lower border of the roof that overhangs the wall usually located in the first three feet of a roof. Undereave vent: Undereave vents are intake vents located under the eaves of the roof that help draw cool dry air into the attic. Again, you can use our ventilation calculator to calculate your attic ventilation requirements and determine how much intake ventilation you would need to properly ventilate your roof and attic.

You might be interested:  What Is Fullness In Garment Construction?

Now that you’re familiar with the basic anatomy of a roof, you’ll start to notice dormers and gables everywhere you turn. More important, you’ll be equipped to have an informed conversation with your roofing contractor when the time comes for you to get a new roof,

Which roof that slopes in one direction sometimes referred to us a lean-to?

What is another name for single slope roof? – A single slope roof is called a skillion or shed roof, which is lean-to attached to a dwelling and offers additional storage to the existing structure. This type of roof is usually built on a taller wall. You can consider a single slope roof like a half of a pitched roof or as an angled flat roof, depending upon your roof design.

Which of the following roofs has slopes in all four directions?

C) Hipped roof : It has slopes on all four sides.

What is the meaning of butterfly roof?

Noun. a roof having more than one slope, each descending inward from the eaves.

Why do Korean roofs curve?

Why Hanok and Hanbok have many curved lines : Korea.net : The official website of the Republic of Korea By Honorary Reporter Ana Claire Hernandez from Philippines Photos = Ana Claire Hernandez The Type Of Roof Which Slopes In Two Directions East Asian countries have traditionally looked at nature as models for their architecture, items and even clothing. Nature has many curved lines from tree trunks to waves. In Hanok (traditional Korean architecture) and Hanbok (traditional clothing), curved lines are clearly visible. The Type Of Roof Which Slopes In Two Directions In Hanbok for women, the chima, or the skirt-like undergarment, has a lot of space for the wearer. Its voluminous feature conceals the lower body, and from the outside, the wearer appears as an upside-down flower bud. She seems more gracious and fluid, accompanied by the curving lines of the chima resulting from movement. The Type Of Roof Which Slopes In Two Directions A Hanok tiled roof has a cheoma, or the slightly raised edge whose purpose is to let in sunlight in winter and protect the interior from the summer sun. Because the sun is closer to Earth in winter than in summer, cheoma allows sunlight to enter a Hanok in the cold. Moreover, a Hanok roof curves inwards to prevent rainwater from being trapped or the tiles from slipping off. The Type Of Roof Which Slopes In Two Directions The wooden columns, pillars and girders of Hanok are sometimes curved because the materials are accepted as is. Wood was used regardless of whether it was straight, bent or curved. Thus the facade or interior of a traditional structure can not only have straight and rigid wood but also those bent and curved.

  1. The need to incorporate curved lines stems from the Korean belief that “humans and nature are one,” something neo-Confucianism often emphasized, and the perceived need for harmony with nature.
  2. In traditional Korean thought, nature was something not to be conquered but to co-exist with.
  3. The belief that nature is the standard for making things is something people can learn from in these times.

[email protected] *This article is written by a Korea.net Honorary Reporter. Our group of Honorary Reporters are from all around the world, and they share with Korea.net their love and passion for all things Korean. : Why Hanok and Hanbok have many curved lines : Korea.net : The official website of the Republic of Korea

What are the 2 kinds of slope?

Slopes come in 4 different types: negative, positive, zero, and undefined. as x increases. The slope of a line can also be interpreted as the ‘average rate of change’. It tells us how fast y is changing with respect to x.

Which of the following lines has a slope of 2?

The slope of a line is a measure of its steepness. Mathematically, slope is calculated as ‘ rise over run ‘ (change in y divided by change in x).

How do you find slope with two sides?

How to find the slope of a graphed line? – To find the slope of a graphed line, do the following steps:

  1. Mark two points on the line.
  2. From the point on the left, draw a horizontal line.
  3. From the point on the right, draw a vertical line. Do you see a right triangle?
  4. Measure how long the sections are from each point to the intersection of the created lines.
  5. To find the slope, divide the rise (the length of the vertical segment) by the run (the length of the horizontal segment)
  6. Is the line declining or rising? If the line rises, leave the slope value as it is – you have your result. If it’s declining, remember that your slope should be negative, so put a minus sign in front of the slope value.

What type of roof has two sides sloping down toward the interior of the house?

Gambrel – Gambrel roof styles are symmetrical two-sided panels with slopes on each side. Their design takes in the advantages of sloped roof angles while lengthening headspace inside a building’s upper level while diminishing what would otherwise be a tall roof.

What are roof slopes called?

Description – The pitch of a roof is its vertical ‘rise’ over its horizontal ‘run’ (i.e. its span ), also known as its ‘ slope ‘. In the imperial measurement systems, “pitch” is usually expressed with the rise first and run second (in the US, run is held to number 12; e.g., 3:12, 4:12, 5:12).

Which roof type has two different slopes on each side of the ridge?

Types of Hip Roofs – There are several types or styles of hip roofs:

Pyramid hip: The simplest hip roof is a pyramid hip or square hip roof. This roof looks like a pyramid, making a single peak at the top. Basic hip roofs will instead have a ridge (as shown on the hip roof above). When a pyramid roof sits on top of a gazebo or other garden structure it is called a pavilion roof.

The Type Of Roof Which Slopes In Two Directions

Mansard roof: For this roof style, each side of the roof has two slopes. The bottom slope is steeper than the top slope.

The Type Of Roof Which Slopes In Two Directions

Combination: A combination roof is the opposite of the mansard. It flares out at the bottom all of the way around the roof. The lower level of the roof is at a much lower pitch.

The Type Of Roof Which Slopes In Two Directions

Hip and valley: This variant of a hip roof includes valleys. Valleys are spots where two roof planes meet and project downwards. Hip and valley roofs have been popular in recent years.

The Type Of Roof Which Slopes In Two Directions