What Are The Names Of Construction Equipment?

What Are The Names Of Construction Equipment
1. Boom Lift – A boom lift is a type of aerial platform used to get workers off the ground to work on an elevated project. This construction lift has a bucket that’s typically large enough for one to two workers to stand in. Wheels or a continuous band of treads are used to make the machine mobile.

What equipment is used in construction?

Types of Heavy Construction Equipment Dragline Excavator. Bulldozers. Graders. Wheel Tractor Scraper.

What is the most common construction equipment?

William Thomas – Senior Logistics Manager Heavy machinery is commonly used in construction projects for a wide variety of tasks. Depending on the size of the task at hand, and the economy of the project, several machines can be used to make construction faster and easier.

What is the example of heavy equipment?

Heavy equipment means such construction machinery as backhoes, treaded tractors, dump trucks, and front-end loaders.

What are foundation equipments?

Foundation equipment consists of machines that are utilized for earth stabilization and foundation support.

What is standard equipment in construction?

Write short note on: Standard and Special equipments 1 Answer

Usually the selection of equipment on a particular project is based on cumulative experience available in the organization both with the concerned individual and in the form of documentation.

From selection considerations the construction equipment’s are classified as a) Standard equipment’s. b) Special equipment’s. Though there is no difference between these two but a equipment is common in use is called standard equipment while other is called special equipment. A concrete mixer is standard equipment while pre-stressing equipment may be considered as special equipment.

Standard Equipment’s:

These are designed to meet the wide demand of the equipment users and to sell in large quantities at comparatively low prices. A standard machine is the result of years of experience and therefore has considerable reliability in the operation. A standard machine performs at fairly great difference in output and speed. Availability and delivery of these are easy and fast and unit cost of production is less. These are manufactured commonly and easily available from the dealers.

Special Equipment’s:

These are generally manufactured to perform specialized operations. Such equipment’s results in low wage cost and low capital costs per unit of output, when the plant operates at high capacity. The initial equipment in such equipment is comparatively high and there is the risk of loss of investment in the equipment when radical design changes occur or the character of the demand changes. Availability and delivery of these equipment’s is difficult and delayed. Special order has to be placed to get such equipment.These are fabricated as per requirement. Unit cost of production is high.

Please log in to add an answer.

What are large equipments?

Large equipment means equipment with a footprint greater than 1m² or greater than 2m in height.

You might be interested:  What Is Plinth Level In Construction?

What equipment is used to build roads?

Semi trucks, cranes, loaders, asphalt mixers, road rollers, graders, excavators and forklifts are just a few types of construction equipment used on a typical job. Some jobs require an entire fleet of vehicles to keep up with deadlines, but a single grader, roller and excavator can handle a small project.

What is a construction tractor called?

3. Bulldozer. A bulldozer, also called a dozer, is a staple piece of construction equipment. It consists of a tractor, typically on tracks rather than wheels, with a large metal bucket plate. Operators use the plate for tasks like digging, excavating and leveling soil and other materials.

How many types of heavy equipment are there?

17 Types of Heavy Equipment and Their Uses – From excavators and dump trucks to concrete pumps and compactors, we’ve listed the most common types of construction heavy equipment. Click the link to jump to the type of equipment you’re interested in learning more about.

  1. Excavators
  2. Loaders
  3. Paving Machines
  4. Backhoes
  5. Bulldozers
  6. Dump Trucks
  7. Trenchers
  8. Compactors
  9. Graders
  10. Telehandlers
  11. Backhoe Loaders
  12. Tower Cranes
  13. Feller Bunchers
  14. Dragline Excavator
  15. Wheel Tractor Scraper
  16. Pile Driving Machines
  17. Concrete Pumps

What are simple equipments?

Simple machine | Definition, Types, Examples, List, & Facts simple machine, any of several devices with few or no moving parts that are used to modify and the magnitude of a in order to perform, They are the simplest mechanisms known that can use (or mechanical advantage) to increase force.

The simple machines are the inclined plane, lever, wedge, wheel and axle,, and, An inclined plane consists of a sloping surface; it is used for raising heavy bodies. The plane offers a in that the force required to move an object up the incline is less than the being raised (discounting ). The steeper the slope, or incline, the more nearly the required force approaches the actual weight.

Expressed mathematically, the force F required to move a block D up an inclined plane without friction is equal to its weight W times the sine of the angle the plane makes with the horizontal (θ). The equation is F = W sin θ. The principle of the inclined plane is used widely—for example, in ramps and switchback roads, where a small force acting for a distance along a slope can do a large amount of work.

A lever is a bar or board that rests on a support called a fulcrum. A downward force exerted on one end of the lever can be transferred and increased in an upward direction at the other end, allowing a small force to lift a heavy weight. All early people used the lever in some form, for example, for moving heavy stones or as digging sticks for land cultivation.

The principle of the lever was used in the swape, or, a long lever pivoted near one end with a platform or water container hanging from the short arm and counterweights attached to the long arm. A man could lift several times his own weight by pulling down on the long arm.

This device is said to have been used in Egypt and India for raising water and lifting soldiers over battlements as early as 1500 bce, A is an object that tapers to a thin edge. Pushing the wedge in one direction creates a force in a sideways direction. It is usually made of metal or wood and is used for splitting, lifting, or tightening, as in securing a hammer head onto its handle.

Get a Britannica Premium subscription and gain access to exclusive content. The wedge was used in prehistoric times to split logs and rocks; an is also a wedge, as are the teeth on a saw. In terms of its mechanical function, the screw may be thought of as a wedge wrapped around a cylinder.

  • A wheel and axle is made up of a circular frame (the wheel) that revolves on a or rod (the axle).
  • In its earliest form it was probably used for raising weights or water buckets from wells.
  • Its principle of operation is best explained by way of a device with a large and a small gear attached to the same shaft.
You might be interested:  What Is The Meaning Of Roof?

The tendency of a force, F, applied at the radius R on the large gear to turn the shaft is sufficient to overcome the larger force W at the radius r on the small gear. The force amplification, or, is equal to the ratio of the two forces ( W : F ) and also equal to the ratio of the radii of the two gears ( R : r ).

If the large and small gears are replaced with large- and small-diameter drums that are wrapped with ropes, the wheel and axle becomes capable of raising weights. The weight being lifted is attached to the rope on the small drum, and the operator pulls the rope on the large drum. In this arrangement the mechanical advantage is the radius of the large drum divided by the radius of the small drum.

An increase in the mechanical advantage can be obtained by using a small drum with two radii, r 1 and r 2, and a pulley block. When a force is applied to the large drum, the rope on the small drum winds onto D and off of d. A measure of the force amplification available with the pulley-and-rope system is the velocity ratio, or the ratio of the at which the force is applied to the rope ( V F ) to the velocity at which the weight is raised ( V W ).

This ratio is equal to twice the radius of the large drum divided by the difference in the radii of the smaller drums D and d. Expressed mathematically, the equation is V F / V W = 2 R /( r 2 – r 1 ). The actual mechanical advantage W / F is less than this velocity ratio, depending on friction. A very large mechanical advantage may be obtained with this arrangement by making the two smaller drums D and d of nearly equal radius.

: Simple machine | Definition, Types, Examples, List, & Facts

What are the tools equipment?

What is the difference between Tools and Equipment? – Tools and equipment are two words that are often used synonymously, mainly due to the similarities of their meanings. Because of this factor, they can be used interchangeably in most instances. However, in certain cases, this may not be so.

  • A tool can be any item that is used to achieve a goal.
  • Equipment usually denotes a set of tools that are used to achieve a specific objective.
  • A tool can be non-mechanical as well.
  • However, when one says equipment, there is a certain mechanical aspect to it that cannot be ignored.
  • The usage of tools among human beings runs back to millions of years.

However, the use of equipment is more of a recent development. • Tools are often seen to be used by animals as well. Equipment is only used by human beings. • Tools are usually multipurpose. Equipment is designed for a specific task. : What is the Difference Between Tools and Equipment

What are items of equipment?

Items of Equipment means and includes all of the items of equipment described on any single Equipment Schedule. Items of Equipment means the items in the scope of supply of this tender for which separate price quotes are required and shall mean 1. Laptop Computer & related accessories.

You might be interested:  How To Remove Acid Stains From Cement Floor?

What are the 4 types of equipment?

TYPES OF MATERIALS HANDLING EQUIPMENT – Material handling equipment usually falls under four main categories: bulk handling material equipment, engineered systems, storage and handling equipment and industrial trucks.

What are examples of special equipment?

Special purpose equipment means equipment which is used only for research, medical, scientific, or other technical activities. Examples of special purpose equipment include microscopes, x-ray machines, surgical instruments, and spectrometers. See also 200.33 Equipment and 200.48 General purpose equipment.

What are the machinery and equipment?

Machinery and Equipment means machinery and equipment used by a manufacturer, Machinery is any mechanical, electrical, or electronic device designed and used to perform some function and to produce a certain effect or result, The term includes not only the basic unit of the machinery, but also any adjunct or attachment necessary for the basic unit to accomplish its intended function.

  1. The term also includes all devices used or required to control, regulate, or operate a piece of machinery, provided such devices are directly connected with or are an integral part of the machinery and are used primarily for control, regulation, or operation of machinery,
  2. Jigs, dies, tools, and other devices necessary to the operation of or used in conjunction with the operation of what would be ordinarily thought of as machinery are also considered to be “machinery.” See Deere Manufacturing Co.v.

Zeiner, 247 Iowa 1264, 78 N.W.2d 527 (1956). Also see the definition of ” replacement parts ” infra, Machinery does not include buildings designed specifically to house or support machinery. Equipment is any tangible personal property used in an operation or activity,

What is standard equipment in construction?

Write short note on: Standard and Special equipments 1 Answer

Usually the selection of equipment on a particular project is based on cumulative experience available in the organization both with the concerned individual and in the form of documentation.

From selection considerations the construction equipment’s are classified as a) Standard equipment’s. b) Special equipment’s. Though there is no difference between these two but a equipment is common in use is called standard equipment while other is called special equipment. A concrete mixer is standard equipment while pre-stressing equipment may be considered as special equipment.

Standard Equipment’s:

These are designed to meet the wide demand of the equipment users and to sell in large quantities at comparatively low prices. A standard machine is the result of years of experience and therefore has considerable reliability in the operation. A standard machine performs at fairly great difference in output and speed. Availability and delivery of these are easy and fast and unit cost of production is less. These are manufactured commonly and easily available from the dealers.

Special Equipment’s:

These are generally manufactured to perform specialized operations. Such equipment’s results in low wage cost and low capital costs per unit of output, when the plant operates at high capacity. The initial equipment in such equipment is comparatively high and there is the risk of loss of investment in the equipment when radical design changes occur or the character of the demand changes. Availability and delivery of these equipment’s is difficult and delayed. Special order has to be placed to get such equipment.These are fabricated as per requirement. Unit cost of production is high.

Please log in to add an answer.