Use Masonry Spray Paint for Planters – If you want to spray paint the pot, be sure you pick one that is specifically designed to be used for masonry applications. This will let it stick to the concrete more efficiently than typical spray paint. Be sure you don’t spray the pot while the plants are in them.

1. Instead, paint the empty pot by turning it over on a covered surface.
2. Position the spray paint between eight and 12 inches from the pot and then spray it on evenly.
3. Stencils for Creating Patterns
4. To add details to the paint, you can even use stencils which create different lines and patterns.
5. You can go with natural shapes such as leaves, birds, and flowers or choose any other pattern you desire.
6. If you choose to use masonry spray paint, you can personalize the design with stencils rather easily.

Prepare the pot by cleaning the outside and adding a water sealant on the inside. Then, spray the entire planter with a base color. Next, lay the stencil over the area that you want to decorate and tape the stencil in place using painter’s tape. Be sure to cover any other area that you do not want to be painted.

Can you paint a cement planter?

How to Paint and Replant Concrete Planters Save yourself the hassle of having to remove paint drips and splatters from your front porch by first maneuvering the planter onto a disposable surface, like a bit of leftover shipping cardboard. Tip : Enlist the help of a friend if the planter is too heavy to move alone.

Typically, you can lift the entire contents of a concrete container out in one piece, as we have here — especially if the soil is dry. Set the old plants aside and be sure to relocate any perennials you want to plant in other locations. Using the sharp edge of the metal scraper, remove as much loose, flaking paint as you can from all areas, including the top and/or inner edge of the planter (Image 1).

Using the wire brush, remove any remaining stuck-on bits of old paint and go over all areas to smooth the surface (Image 2). First, use a broom and dustpan to sweep up the workspace. Give your planter a good, solid coat of paint on all exterior sides (Image 1).

Also, add an inner ring of paint to the planter’s interior (Image 2). If necessary, allow the first coat to dry, then brush on a second coat. Note : Look at your planter from all angles, including down low to ensure you’ve evenly covered all areas. A solid coat of exterior paint not only looks great but will seal and protect the porous concrete from the elements for many years to come.

After the paint has fully dried, add potting soil, leaving just enough room to add the new plants. You’ve probably heard it before but the successful formula for a container is thriller, filler and spiller. So, you’ll need a central knockout plant/plants for the thriller (we used a single purple salvia surrounded by a pair of Persian shield plants), filler plants that grow in to give the planter a lush look (we used pale purple lantana) and a spiller, or a trailing plant that will spill over the container’s edge (we used lobelia).

1. To determine placement, set the nursery pots on top of the freshly added layer of potting soil and arrange till you’re happy with their position, being sure to leave each plant a bit of elbow room to accomodate future growth.
2. Remove each plant from its nursery pot by firmly grasping the bottom of the plastic pot while gently pulling the plant free (Image 1).

To give your plant a fresh start in its new home, gently tease apart the roots with your fingers (Image 2) to encourage new growth. Place each unpotted plant in its new location (Image 3) and fill in any gaps with potting soil, gently but firmly pressing the soil around each of the plants to secure them in their new home.

Finally, no planter is complete without a layer of mulch that not only serves as a decorative finishing touch but also preserves moisture (meaning you’ll need to water less often) and discourages weeds. Voila, your decades-old planters have a new lease on life and will look great for many seasons to come.

Sarah Busby; Styling by H. Camille Smith Give your curb appeal a major boost by adding a colorful outdoor rug, cozying up a bench with pillows and popping in more plants in complementary colors (Images 1-3). : How to Paint and Replant Concrete Planters

What is the best paint for outdoor pots?

Acrylic Paint is one of the best paints you can use for your pots because it is water-based and non-toxic, which is good for your plant’s health. You can also use Milk Paint, Chalk Paint, Linseed Oil, and Hemp Oil. These paints are all plant-safe.

Can you use chalk paint on cement pots?

If you are intending on planting your concrete pots, add a couple of layers of Chalk Paint® Lacquer to the inside of the pots. This will seal the concrete and ensure the moisture from the soil and plants is not drawn into the pot.

What paints to use on cement?

Epoxy-based paints provide high durability and stain resistance, making them ideal for garage or patio floors. Masonry paints are designed for brick and other masonry applications, but also provide effective coatings for concrete.

Can you paint directly over cement?

CAN YOU PAINT CONCRETE? – Almost any concrete surface that’s in sound condition can be painted. That includes interior floors and walls as well as exterior surfaces such as patios, sidewalks, and pool decks. Just make sure the surface is clean and free of existing coatings or sealers that could prevent the paint from adhering.

What is the strongest outdoor paint?

Durability – While it’s true that oil-based exterior paint formulas offer excellent penetration, acrylic exterior paint is generally considered the most durable option. Why? Acrylic paint tends to have a more elastic formula that allows the paint to expand and contract in response to the environment and therefore has better weather resistance.

Do you need to use a primer with exterior paint? In many cases, you’ll want to invest the time it takes to prime your surface before painting it with exterior paint. This is true in the following scenarios:

Painting bare woodUsing exterior paint on a slick surface, such as metalApplying paint of a different shade, or when covering stainsWhen painting concrete, vinyl, or stucco

“With vinyl and aluminum, you’ll want a specialty primer to help the surface withstand the paint’s PH level,” says Chapman. You typically don’t need to use a primer before exterior paint if you are applying the same color over a previously painted surface or if there are no bare surfaces or stains you’re trying to cover. How long does exterior paint last? On average, exterior paint lasts 5 to 7 years before needing a recoat. In some instances, it may even last for as long as 10 years. “Paint longevity depends on how well you maintain it as well as the harshness of the elements in your region. Rain, sunlight, and humidity can make exterior paint fade, chip, and peel faster, but you can find specially-formulated paints that withstand the elements better than standard exterior emulsions,” says Chapman. Exterior paint on vertical surfaces (such as siding, porch posts, and railings) will last longer than exterior paint used on horizontal surfaces. How do you clean exterior paint? To keep surfaces clean and grime-free, you can wash with water and a small amount of dish detergent or mild cleaner. “If needed, scrub the surface gently with a soft-bristle brush and finish by hosing the dirt off,” says Chapman. Besides a regular garden hose, Chapman also recommends a power washer with a 15-inch nozzle. “It will add extra precision,” he says. Harsh cleansers are generally not recommended, but if your surface is extremely soiled, Chapman suggests adding a teaspoon of bleach to your cleaner. Can you use exterior paint indoors? Exterior paint is formulated to stand up to moisture and resist the growth of fungus and mildew, so it might seem like a good choice to use inside, especially in humid or wet areas like a bathroom or kitchen. However, it’s generally recommended that you don’t use exterior paint indoors, due to increased levels of VOCs that can persist for months. “Exterior paints may emit toxic fumes even after drying, and these could make family members or pets sick,” says Chapman, Plus, exterior paints are designed to be weather-resistant but may not maintain their finish if scrubbed and cleaned in the same manner that you would treat indoor painted surfaces. However, some exterior paints can be used for both indoor and outdoor applications according to the manufacturer. Low-VOC or zero-VOC formulas are sometimes recommended for either type of application.

This article was researched and written by Lexi Dwyer, who has been writing for The Spruce since 2019 and has covered topics like home decor shopping sources as well as products like clotheslines, gardening shoes, and woodworking benches. To make this list, she considered the formula, ease of application, drying time, color choices, and durability.

What is the cheapest way to color concrete?

Coloring Concrete With Water Based Paints – You can color concrete with acrylic paint by mixing it into the wet mix. Acrylic paint can be a cheap way to color concrete crafts.

1. The same goes for using latex paint for coloring concrete.
2. I made these using white cement mix and the green was acrylic paint.
3. Even though the cost for acrylic and latex paint is low, these water based paints are not as concentrated as a pigment or liquid colorant made specifically for concrete.
4. They will require adding a good bit more paint to a mix to get to your desired color, than if you use specially designed coloring.
5. You can learn more about this below where I did,

How do you seal painted concrete pots?

Hello @notshyofeffort Thank you for sharing your question about painting stone concrete pots. Upcycling your pots with paint is one of the best ways to freshen up their appearance. This also serves as a good time to refresh the soil in your pot. Put your plant in a temporary container for the moment.

Because you have an older pot it will be necessary to give it a good clean. Use a Sabco Handled Scrub Brush and some soapy water to clean the outside and inside of the pot. Make sure to thoroughly wash the pot in water and that it is free of soap. Place the pot in full sunlight to make sure that it is totally dry.

The next step is to seal the pot with the Crommelin 750ml Ornamental Sealer, Once the seal dries, you can then proceed to paint the pot with your preferred colour. Please keep us updated, I’m sure our members are keen to see your newly painted pots. Here is a link to a step-by-step guide: How to upcycle terracotta pots If you need further assistance with this project, please let us know.

Do concrete pots need to be sealed?

Do concrete planters need to be sealed? Concrete pots only need to be sealed if you are growing a plant in the pot that needs more acidic soil. You see, concrete contains lime which can cause the soil to become alkaline.

Do you need primer to paint cement?

Summary: Should You Prime Concrete Before Painting? – Primer is an essential first step when painting concrete or any masonry product. It gives the paint a surface to adhere to and an even color to paint over. This allows your paint to last longer, look better and become chip resistant.

1. It’s also a lot cheaper if you use primer because less coats of paint are required.
2. And paint is generally more expensive than primer.
3. Primer also prolongs the life of your concrete by soaking into small pores which changes a rough surface into a smooth one.
4. How do you know if a concrete surface needs a primer before being painted? Generally speaking, priming before paint is so essential to a successful paint job that you should always assume the concrete needs primer first.

There’s no situation I can think of where you would paint raw concrete without priming it. For both exterior and interior projects, applying primer to concrete prepares the surface for paint. This accomplishes several important and beneficial outcomes:

Primer fills any small gaps or pores which creates a smooth, uniform surface that’s ready for paint. It works as a bonding agent between the concrete and the paint. This assures proper adhesion to both surfaces. Primer soaks into cement which helps protect it from damage over time. A primer coat prolongs the life of the paint or stain. Primer turns a poor surface for paint into a smoother one that accepts paint. The finished painted wall looks much better if there’s a primer coat.

In general it’s safe to say that you should always prime concrete before painting. If you have any questions or comments us any time. We’d love to hear from you. : Should You Prime Concrete Before Painting? Essential Tips

Does Chalk Paint wash off concrete?

Does Sidewalk Chalk Paint Wash Off? – The simple answer is yes. At least, this recipe does.Truth be told, I have tried a lot of sidewalk chalk paint recipes that have claimed to be washable, and have ended up staining my driveway for a few months.But since this recipe is made with sidewalk chalk, and only sidewalk chalk, it is as washable as the brand of chalk you use.

Will Chalk Paint stick to cement?

Using Annie Sloan Chalk Paint™ Outside. www.ladeuxiemechance.com As summer approaches and we once more venture in to our gardens to enjoy the sun, some of you no doubt will be looking around and thinking isn’t it about time to refresh and paint tired or worn looking painted woodwork or garden furniture.Edit – it is currently 32° outside.

1. Summer is here 🙂 One of the wonderful things about is that it sticks to just about anything.
2. And some things you really don’t want it to.
3. Case in point was when we had a dog and it landed up with a very nice painted tail.
4. Yes a black and white collie with an Emporer’s silk tail ! Very fetching! Fortunately it washed out very easily.

Now, most of us will have used Chalk Paint™ on furniture, walls and floors inside your houses but today we are going to move outside the house. Did you know that Chalk Paint™ even works outdoors ?! Oh yes, it is particularly good on brick, concrete, stone and terracotta – and there’s no need to wax.

• You can even breathe new life in to that tired looking garden furniture.
• Wall paint in Annie Sloan Coco Now hold on a minute! Here are a few things to bear in mind before rushing outside with your paint brush in one hand and a pot of Chalk Paint™ in the other.
• What? What can possibly go wrong?? Well, First of all it will fade in the sun.

Secondly it does age gracefully with the elements. Importantly bear in mind that it is a water-based decorative paint and does not have any weatherproof or protective properties. Let me repeat that. It is a decorative paint and not a protective paint. Depending on the look you want, and conditions of where you are, you may find it will need a fresh coat periodically.

• I am sure I have mentioned this somewhere before but please remember Chalk Paint™ is not recommended for teak or other oily woods.
• To avoid any dissappointment always try painting a small test area first! The majority of issues that arise when people paint wooden garden furniture – you may be unaware that it is teak or another oily wood, or it may have been treated with something to make it more weather resistant (eg Cuprinol, Ducks back etc).

Bear in mind that using a water based paint on a surface that is designed to resist water is never going to be easy. All of these things can affect the adhesion of the paint, and as I have already said the best advise is to paint a test patch if you are not sure.

Some colours can fade quite quickly if they are used in an area that is exposed to very strong sunlight – this is particularly the case with reds. Oh the joys of living in sunny France! A water based exter www.ladeuxiemechance.com ior varnish with UV protection is advisable if this is likely to be an issue.

On garden furniture, we would strongly recommend a coat of water-based exterior varnish which will protect against stains and keep the finish looking good for much longer. For the best results get a varnish with UV protection to prevent colour fading.

So far I have mentioned using a water based exterior varnish and here is why. Wax and Lacquer are not suitable for outdoor use. Both of these are water resistant finishes, but not completely non permeable – water can get underneath the sealant and cause the paint to flake or bubble. And apart from anything else in hot sun any wax will melt and disappear and it will also make floor lacquer turn yellow.

Don’t waste your time or money doing this as it will quickly be undone. If you are painting an outdoor piece ‘in situ’, wait for a spell of good weather and certainly not when rain is imminent (Yes I know, easier said than done at this time of year). Your piece should be COMPLETELY dry before you begin.

If you can leave it to dry in the sun after painting, this will help the paint to bond with the surface. You are basically baking the paint onto the surface to creating a tougher finish. There are of course exceptions to every rule and perhaps this post is erring on the safe side of things but if you don’t want a perfectly painted look then,

And I hope all of you reading this will continue to do so! There are some amazing projects out there – trucks, cars and caravans to name but a few! If after reading this you would prefer to buy a paint that is more suitable to exterior use please contact us with details of what you would like to paint and the type of finish you would like to achieve.

1. To buy on line or in store UPDATE Since writing this article back in 2017 Annie Sloan has brought out a brand new for you to use outdoors.
2. Is a hard-wearing, water-based polyacrylic varnish with built-in UV protection.
3. Use it over Chalk Paint™ for a robust finish that will withstand general wear and tear – perfect for dining room tables, outdoor furniture, floors and skirting boards.

It goes on perfectly clear and dries quickly without yellowing over time. : Using Annie Sloan Chalk Paint™ Outside.

What paint is waterproof for concrete?

Waterproof paints can either be oil-based or latex enamel. The glossier your paint is, the better it is at resisting water, and the easier it is to clean. They’re available in a wide range of colors and for almost all kinds of surfaces.

Is it a good idea to paint cement?

Learn how to paint concrete to give plain surfaces a whole new look and score major curb appeal points for your concrete stairs and walkways. –

• Working Time: 4 hours
• Total Time: 5 days
• Skill Level: Intermediate

Concrete is an inexpensive, durable building material, but all that gray can be a bit boring. You can paint or stain just about any concrete surface—a walkway, concrete stairs, concrete brick walls, or even a basement or garage floor. Weathered concrete with cracks or stains is difficult to fix without the patched section standing out, which is especially annoying in front-facing areas of a house.

1. A coat of paint will help disguise repairs on concrete steps and walkways.
2. The result is a clean and finished look that will give a home’s entrance great curb appeal.
3. Don’t skimp on the preparation before painting concrete.
4. Getting the surface as clean and smooth as possible will give you the best results.

And when shopping for products, look for cleaners and sealers that are specially formulated for concrete. Happy painting! BHG / Jiaqi Zhou

Is it a good idea to paint cement?

Learn how to paint concrete to give plain surfaces a whole new look and score major curb appeal points for your concrete stairs and walkways. –

• Working Time: 4 hours
• Total Time: 5 days
• Skill Level: Intermediate

Concrete is an inexpensive, durable building material, but all that gray can be a bit boring. You can paint or stain just about any concrete surface—a walkway, concrete stairs, concrete brick walls, or even a basement or garage floor. Weathered concrete with cracks or stains is difficult to fix without the patched section standing out, which is especially annoying in front-facing areas of a house.

• A coat of paint will help disguise repairs on concrete steps and walkways.
• The result is a clean and finished look that will give a home’s entrance great curb appeal.
• Don’t skimp on the preparation before painting concrete.
• Getting the surface as clean and smooth as possible will give you the best results.

And when shopping for products, look for cleaners and sealers that are specially formulated for concrete. Happy painting! BHG / Jiaqi Zhou

What kind of paint do you use on concrete statues?

Download Article Download Article Concrete statues are commonly found as yard ornaments or objects of interior décor. Because concrete is porous, it is important to clean it, apply a base coat, paint it, and seal it to make the beauty last. When well-cared for, your concrete statuary can be eye-catching and unique.

• Scrub the statue with water (no soap!) and a brush, then let it air dry. Fill in any cracks with epoxy putty and wait 3-4 hours for it to dry.
• Wet the statue and apply an acrylic base coat. Add some water to the paint to help it adhere to the concrete, then paint from the bottom of the statue up.
• Add a top coat of acrylic latex paint and wait 24 hours for it to cure. Seal the statue with a UV and water sealant to protect it from the elements.

1. 1 Put the statue in a bucket of plain water and scrub it with a large brush. Don’t use soap in the water since it may have a negative effect on the concrete and the overall painting process. Scrub the statue until you get the large areas as clean as you’d like them. Use a toothbrush to scrub the smaller nooks and crannies in the statue.
2. 2 Take the statue out of the bucket and let it dry in the sun. It should take a few minutes to dry, depending on how warm the air is. Air drying the statue will kill any moss that’s left behind. Concrete statues look more pristine when they’ve been dried in the sun and when they don’t have any moss on their surfaces.
   • Don’t leave concrete statuary to dry outside in the winter, because moisture will collect in its pores, causing it to expand and eventually crack.

   Advertisement

3. 3 Fill in cracks with epoxy putty. Choose a putty that is the same color as the statue, or close enough. So, if the statue is white or gray use silver or gray putty. Break off a couple pieces of epoxy putty or however many you need to fill in each crack. Smooth it over using a wet spatula or a knife and let the putty dry for 3 to 4 hours.
   • You can find epoxy putty in craft stores.
   • Wear gloves when handling epoxy putty to protect your skin from irritation.
   • Use a blow dryer to set the putty quickly.
   • You can use epoxy putty to replace missing pieces from a concrete statue, such as toes. The putty becomes hard as a rock once it’s dried, so no one will know a toe was ever missing.

Advertisement

1. 1 Dump water on the statue to make the paint stain the concrete. Before applying a base coat getting the statue wet will ensure that that paint stains it under the surface, rather than just coating the surface. Concrete is porous, so the water will pull the paint further in to make the base coat more permanent.
   • Have a container of clean water ready for drenching the statue. There is no set recommended amount of water to use on the statue, as long as it’s soaked through.
2. 2 Mix water with your acrylic base coat to ensure it’s absorbed well. It doesn’t hurt to add water to the actual paint, because this will help it to soak into the concrete. When you water down a basecoat, the concrete absorbs it and stains better.
   • There is no recommended ratio of water to use.
   • If you plan to use an antiquing or detailing method on the statue, choose white paint for the base coat.
3. 3 Coat the bottom of the concrete statue with the base coat first. You should paint the bottom first, because you would leave finger smudges in the paint on the top of the statue if you painted the bottom last. Place it on its side to let the bottom dry.
   • This should be the same paint that you’re using as the base coat for the rest of the statue.
4. 4 Apply a base coat to the entire statue using a 2 in (5.1 cm) chip brush. Use an acrylic latex exterior paint for the base coat. The paint can be any color, but popular base coats are black, gray, and brown.
5. 5 Inspect the statue after letting the basecoat dry for 5 minutes. Feel it with your hand for wet paint. If it’s completely dry, then it’s ready for the top coat. On a warm day the paint may dry in 5 minutes. It may take a little more time on a humid day.
   • Keep the wet statue away from pets and children who may tamper with it.

Advertisement

1. 1 Use acrylic latex paint on concrete statues. For concrete statuary, water-based acrylic latex paints are recommended for their ability to soak into the concrete and stain it beyond its surface. Acrylic latex paints also don’t dry and crack like a shell over time, like oil-based paint does.
   • If you’re painting an animal, you may choose realistic colors, such as brown and white for a rabbit.
   • You should always use a paintbrush to paint the statue, as opposed to spray painting it. Spray paint doesn’t look as nice and it doesn’t last as long as paint applied with a brush.
2. 2 Paint the top coat using the dry-brush method. Dip a 2 in (5.1 cm) chip paintbrush into the color you chose as the top coat. Wipe most of the paint off on a piece of cardboard so that there’s almost no paint left on the bristles. With the brush almost dry, paint against the details of the statue using a back-and-forth dusting motion.
   • Make furry animal statues stand out by painting them with a base coat, and then dry-brushing a solid color over it. For example, dry-brush brown paint over a black base. Soften the brown with some white paint dusted over it.
3. 3 Give the statue a weathered effect by antiquing it, if desired. After applying the top coat, wipe away the excess paint using a paper towel. Apply and wipe away paint as necessary to get the desired effect. A small amount of the base coat should be exposed throughout the statue to make the color look faded.
   • Concrete leaf stepping stones are an example of statues that look good with an antiquing method.
4. 4 Leave the top coat to dry for 24 hours. Allow the top coat to dry for 24 hours before moving on to the next step in painting concrete. Let it sit outside if it’s warm and dry out.
5. 5 Highlight a statue’s features with the detailing technique. Detailing involves using small brushes to create details in the top coat by hand and using multiple colors of paint. Use this technique to fill in features such as eyes, noses, and clothes on statues. Detailing can be used when you’re painting animal statues with feathers and beaks or gnomes with clothes, for instance.
   • One example is if you’re painting a manatee statue and want to give it some pink coloring on its cheeks; use a small brush and give its cheeks a dusting of pink paint.
6. 6 Cover the statue with a UV/water sealant to protect the paint from the elements. Place the concrete statue on a ventilated surface, such as gravel or rock, when you apply the sealant. Leave it there for 24 hours to dry. Sealants make paint last longer and prevent it from flaking off.
   • You can also buy a can of clear enamel spray to make the statue look glossy.

Advertisement

Add New Question

• Question Can you spray paint concrete statues? Kelly Medford is an American painter based in Rome, Italy. She studied classical painting, drawing and printmaking both in the U.S. and in Italy. She works primarily en plein air on the streets of Rome, and also travels for private international collectors on commission. Professional Painter Expert Answer
• Question Is painting concrete a good idea? This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness. wikiHow Staff Editor Staff Answer
• Question How long does painted concrete last? This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness. wikiHow Staff Editor Staff Answer Support wikiHow by unlocking this staff-researched answer. If you clean and prime the surface properly and use an appropriate type of paint, it can last for many years. The paint will probably start to deteriorate more quickly on outdoor surfaces, since they’re more exposed to the elements.

See more answers Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

Spray paint is not recommended for painting concrete statuary, because it doesn’t last, and it looks bad.

Advertisement Article Summary X To paint a concrete statue, start by dumping water over it so it’s soaked, which will help the paint absorb better. Then, mix some acrylic paint with a little bit of water and apply a base coat to the statue using a 2-inch chip brush.

Is it OK to paint a concrete foundation?

Why Should I Paint my Foundation? – Concrete is the most common type of foundation used in homes. Typically, it’s visible above ground level but beneath your siding. A lot of homeowners simply choose to leave it alone, and that’s okay – but not only will painting it make your home look more appealing, paint can also help protect your foundation from damage.

• Painting your foundation can make your home less susceptible to water damage and UV damage.
• Modern paint products can cover concrete for up to ten years without peeling, and they’ll allow you to let your foundation look a little prettier than drab gray or white.
• Water and UV light are the two biggest enemies to an exterior surface.

Concrete, although it is generally an extremely durable material, is susceptible to both water and sunlight- over time, this exposure can cause your concrete to begin to crack or crumble.

What kind of paint do you use on a planter box?

Paint for Outdoor Wooden Planters – If you want to protect the life of your wooden planters and raised beds without introducing any potential toxins or chemicals, there are a number of natural-based home treatments and products available. Garden Tabs recommends natural products whenever possible.

• For instance, oils like linseed, dark tung and hemp also provide a safer method of sealing the wood, which will help to prolong its life.
• There are also commercial products made specifically for safe and ecological use that you can purchase online or at any local hardware store.
• Check the information on the container and the ingredients list to make sure you’re choosing something that’s garden-safe.

These treatments are mainly for safely sealing the wood. This will protect it but won’t necessarily introduce any immediate color. If you’re looking to add color as well as protection, you’ll want to start with a nontoxic paint for wooden garden planters that’s water-based, which will be the safest to use, says The Organic & Natural Paint Company,