The formula to construct a house is: Cost of construction = area of plot x construction rate per sq ft. Another factor where the pricing of the material for the construction of the house varies immensely is the pricing.
Contents
- 1 How much it cost to build a duplex house in India?
- 2 How is construction cost calculated?
- 3 Is it profitable to own a duplex?
- 4 How long does it take to construct a duplex house?
- 5 How do I calculate the cost of materials to build a house?
- 6 How much cement is required to build a house?
- 7 How many floors does a duplex have?
- 8 Why a duplex is better than a house?
- 9 How many blocks do I need for a 4 bedroom duplex?
- 10 How much does a duplex cost in Nigeria?
- 11 What is the cost of building a 5 bedroom duplex in Nigeria?
- 12 How much does it cost to build a 30×40 duplex house?
How much does it cost to build a duplex in Nigeria 2022?
Cost of Building a 4 bedroom duplex in Nigeria 2022 – NGN 27,984,684 – As you can see from the calculations, we arrived at a total cost of building a 4 bedroom duplex in Nigeria, which is almost NGN 28,000,000. This involves just the construction of the 4 bedroom duplex in Nigeria.
How much it cost to build a duplex house in India?
How much cost to build a duplex house: – However, a duplex house cost would be between 1700 and 1800 square feet. The price is approximately 28.8 lacs for a duplex house of 1800 square feet on a G+1 build in a 20 by 40 Plot. In general, a 3BHK Duplex house can be easily built on a G+1 floor with a reasonable budget.
- Notably, the ultimate building cost is once again influenced by the particular demands of the clients and the architect’s method of carrying them out.
- Yes, definitely while constructing I was constantly thinking about how much cost for duplex house? However, now I understand that both landlords and homeowners can make excellent investments by purchasing a duplex.
I would like to conclude here about the estimated duplex house construction cost in India. I hope this helps:) Contact NoBroker and take advantage of its Buyer Plans to achieve the finest results if you want to purchase a duplex home without any hassle or brokerage fees.
How much does it cost to build a duplex in NC?
Duplex Construction Costs
| Price per square foot | $95 – $220 |
|---|---|
| Average total cost | $285,000 – $537,000 |
| Average one-story duplex build cost | $95 – $135 |
| Average two-story duplex build cost | $110 – $180 |
| Average side-by-side duplex build cost | $130 – $220 |
What is the budget for duplex house?
What is the Budget required for building a Duplex House? – The cost required for Building a duplex house in Bangalore varies from Rs 35 lacs to Rs 90 lacs+ just for the construction and for the site cost might be keeping a budget of Rs 45lacs to Rs 90lacs+ depending on the site dimensions/locality.
How much does it cost to build a 4 bedroom duplex?
Cost Summary – Total cost of substructure (foundation to DPC) = ₦4,429,870 Total cost from ground floor to overhead level = ₦2,312,903 Total cost of first floor decking = ₦4,929,608 Total Cost from the first floor to roofing level = ₦2,529,103 Total cost = ₦14,201,484 Allow 15% for contractors profit and overhead = ₦2,130,222 Therefore, the total cost of constructing a 4-bedroom duplex from the foundation to the roofing level should range between ₦14,201,484 to ₦16,331,706. Residential Duplex under Construction by Structville Integrated Services Limited For your building design and construction services, contact; Structville Integrated Services Limited Phone/WhatsApp : +2348060307054, +2347053638996 E-mail : [email protected]
How is construction cost calculated?
The cost of construction depends on the quality of material as well. Higher the quality, the higher the prices. The basic formula to calculate construction cost per square feet is: Cost of construction = area of plot x construction rate per sq ft.
Is it profitable to own a duplex?
Investing in Duplexes Pro #1 – Great Monthly Cash Flow Potential – The unique thing about investing in duplexes is that it provides options to the owner. You can choose to live in one side of the duplex while renting out the other side, or rent out both units.
How many square feet should a duplex be?
$552,000 – Discover the costs in your city Get your job done in 3 easy steps 1 Howmuch.net finds the best top-rated contractors in your area 2 Contractors give you free customized estimates 3 Compare estimates & hire the contractor that will best fit your needs Duplex construction is far more like single-family home construction than it is like building apartments or condos.
- Most duplexes are single or two-story structures that may have already been a single-family home.
- Duplexes are also typically larger, with the average duplex in the U.S.
- Around 900 square feet.
- In the case of a four-unit building that requires 4,000 square feet of construction, there are a lot of factors involved in determining the cost.
This type of building is never going to be on the lower end of the estimate ranges. Because it is essentially building multiple “homes” at once, it takes a lot of time, money, and materials to get the job done right. Usually, construction costs average around $126 per hour for the total job (including labor and materials).
The number of units in the building, whether it is new construction, and what type of materials you use will also affect the cost of this construction project.; Because a house or multi-unit family construction project is priced on a larger scale, it can be hard to get an idea of exactly what you are paying for.
You will also need to invest in an architect to draft a building design, a list of work, a budget, and drawings. They will also administer the process of construction and make sure that final details are taken care of. Most architects charge 10-17% of the total budget.
| Item | Cost |
|---|---|
| Materials | $273,000 |
| Labor | $268,700 |
| Machine costs | $9,800 |
| Total Cost | $552,000 |
How much does it cost to build a 30 * 40 duplex house?
30×40 HOUSE CONSTRUCTION COST IN BANGALORE FOR DUPLEX HOUSE of G+1 or G+2 FLOORS BUA: 1700 to 2600 SQ FT – Below is a detailed Table informing the Estimate for Building a house on a 30×40 Site with different scenarios.
| 30×40 Construction cost in Bangalore / 30×40 House Construction cost in Bangalore Duplex/Rental | No of Floors G+1 G+2 G+3 G+4 | Built up Area (BUA) | Total 30×40 Construction cost @Rs 1800 /sq ft |
|---|---|---|---|
| 30×40 Ground Floor | Ground Floor G | 750 sq ft | Rs 17 Lakhs |
| 30×40 Ground + 1 Floor | G+1 Floor | 1700 sq ft | Rs 31 Lakhs |
| 30×40 Ground + 2 Floors | G+2 Floors | 2400 sq ft | Rs 44 Lakhs |
| 30×40 Ground + 3 Floors | G+3 Floors | 3200 sq ft | Rs 58 Lakhs |
| 30×40 Ground + 4 Floors | G+4 Floors | 4100 sq ft | Rs 74 Lakhs |
| 30×40 Duplex House G+1 Floor @ 2200/sq ft | G+1 Floor Duplex House | 1800 sq ft | Rs 39 Lakhs |
| 30×40 Duplex House G+2 Floors @2200/sq ft | G+2 Floors Duplex House | 2450 sq ft | Rs 54 Lakhs |
| 30×40 Rental Houses G+3 Floors | G+3 Floors Rental | 3150 sq ft | Rs 55 Lakhs |
| 30×40 Rental House G+4 Floors | G+4 Floors Rental | 4150 sq ft | Rs 75 Lakhs |
If one needs to know the 30×40 Duplex house construction in Bangalore on a 30×40 site then the built-up area comes in between 1700 sq ft to 1800 sq ft. It again depends on the kind of requirements given to the Architects for designing. Generally, one can construct a 3BHK Duplex house of G+1 or G+2 floors; also, if the client has sufficient budget, then one complete floor can be left for the parking area, which will be termed as “Stilt Floor” and the upper called Ground floor where the Duplex house starts. It’s crucial to meet the Architect who is assigned to work on the project and discuss all your design needs, requirements that you need to implement to your House concerning the planned budget as one needs to make sure that the construction cost escalation is kept to a minimum during the house construction process.
- Below are all the planning options to know the 30×40 cost of construction in Bangalore for a Duplex house.
- The construction rates are explained based on each item to help you plan your budget.30×40 DUPLEX CONSTRUCTION COST G+1 or G+2 FLOORS OF BUA: 1800 SQ FT If you are having a limited budget of around Rs 45 to 55 lacs, then this would be the ideal option for you to choose.
The overall built-up area or BUA comes approximately 1700 to 1800 sq ft for complete house construction of G+1 Floors, There would decent space left to take of present and future parking needs; the residential Architects hired for your project can work as per your needs and given requirements.
- It’s also very important to freeze the floor plans with clearly marked 2D interior layout showing all furniture layouts which will help the client finalize the floor plans.
- As any changes or alterations made to the plans during the house construction will delay the project and increase the cost of construction.
Hence, take some time in finalizing the Floor plans and 3D Residential House Elevations with your Architects before the actual construction begins on site. The general requirements for a 30×40 Duplex house area are mentioned below, along with the project’s construction rates,
Ground Floor: Car parking 1nos + 4 Two wheeler parking slots + Living 13×19 + Dining for 6 of 110 sq ft + Kitchen 10×12 + Outside utility + Store room attached to Kitchen + Master Bed room 145 sq ft with attached bath room + Common bath + Pujja room of 5×6 + Internal Staircase. First Floor: Balcony overlooking the road + Family living of 10×16 + Roof cutout double-height overlooking living below + 1 Master bedroom with study + Guest bedroom + Internal staircase continued to Terrace area.
Second Floor: Solar provision + Overhead tank + Staircase headroom + Open terrace.30×40 COST OF CONSTRUCTION FOR DUPLEX HOUSE STILT + G+2 or G+3 FLOORS BUA: 2600 SQ FT If the Client has a budget of Rs 60 lacs+ for his residential house construction, this would be the preferred option, Scope for landscaping for more greenery, More balconies resulting in more inside-outside spaces, Better elevation possible, Staircase can be a modern concept using prefab concepts, Larger windows for better ventilation and natural light; More luxury spaces can be created.
The main advantage of constructing a Duplex house above floors are more natural light, more ventilation, less noise as the duplex will be above road level, which will help in cutting down street noise, more space as one need not leave space for parking area this additional space can be well utilized for better planning, Larger and wider balconies, etc.
Hence, if the client has the needed budget for building his Duplex house on his 30×40 or 1200 sq ft site, this would be a better option as it has all the advantages mentioned above. The only drawback of this option is that one needs to climb one floor to access the Duplex house, which might be difficult for older adults.
- This can be avoided by providing a lift that will add additional cost to the overall project.
- Stilt Floor: Parking for 4 cars + 10 Two-wheelers + Servant quarters (if required) + External staircase leading to upper floors.
- Ground Floor: Foyer of 8×8 with shoe rack + Open living room 180sq ft + 10×16 Kitchen area + Dining area for 6 persons + Puja room of 7×6 + Common washroom without shower + 174 sq ft Master Bedroom with walk-in closet attached bath + Internal staircase.
First Floor: Family lounge of 180 sq ft with attached Balcony of 12×6 + Double height provision either at dining or living room + Master bedroom of 170 sq ft with study zone attached to bathroom + Childers bedroom area 13×15 with attached bath + open Library at lounge area + Internal staircase to the second floor.
How long does it take to construct a duplex house?
How Long does it take to Build Ground plus 3 House in Bangalore –
This article is the fourth in a multi-part series of articles describing Construction of ‘Ground plus 2′ or ‘Ground plus 3′ Independent Houses on 30×40 BDA Plots in Bangalore and nearby region. Related Articles below this post There are various factors involved but the biggest one is “how soon client wants project to be completed ?” case 1 :
There are Home owners who doesn’t have time they say I want project to be completed within 9 months at any cost. In such cases, contractor has to charge extra. Owner tells contractor to do everything possible, ask labour to work day and night. All they want is tell me delivery timeline & complete the project.
- Case 2 : In other case, Home Owners will tell contractor that they want work to be done fast.
- However they will not instruct Contractor to work day & night.
- Payments : Speed on the execution depends upon how discipline Owner is in making payment.
- If you are skipping payments of bills, it will directly impact speed of the project.
If there is a delay in payments there be delay in the work. ContractorBhai team has completed several Ground plus 2 & Ground plus 3 projects in 9 to 12 months timeframe. Without delay in payments if work is done without major breaks, it can take 12-15 months to complete a Ground + 2 House in Bangalore.
How much does it cost to build a 1500 sq ft house in NC?
Ft. Georgian-style Federal home using good-quality materials and traditional building methods. This project’s low cost is $187,500 for a 1,500 sq. ft. Cost to Build a House in North Carolina.
| Average Cost to Build a Home in North Carolina | |
|---|---|
| National average cost | $525,000 |
| Average range | $420,000 – $630,000 |
| Low-end | $187,500 |
| High-end | $1,500,000 |
How do I calculate the cost of materials to build a house?
The Basics of Material Estimating Even the most experienced and professional applicators can have trouble determining the appropriate amount of materials needed for their project. Underestimating or overestimating can have a tremendous impact on budget, product availability, project scheduling, forecasting and bidding.
A successful project starts by taking an accurate lay of the land. Following are tips that will help pros confidently select which products to use, determine the quantities required for the project and avoid running short while on the job. Calculate Project Square Footage First, in order to determine how much material will be needed for a specific project, you must determine the square footage of the area you are surfacing.
As a rule of thumb, measurements should always be rounded up and considered additional square footage to ensure the appropriate amount of material for the application. Surface conditions such as porosity, spalling, pitting, cracking and so forth will all result in the use of additional material.
Adding square footage to measurements will help ensure materials do not run short during application. A lot of contractors like to use the “ten percent rule” for waste and order accordingly. Using a laser tape, measuring wheel or measuring tape is best to determine the length and width of the area that is being surfaced.
If the work space is not a perfect square or rectangle, measuring from the furthest point of both the length and width will account for any shorter sides of the space. After measuring, round up to the next foot on the length and width measurements. Then, multiply the length and width to determine the total amount of square feet for that area.
Length x Width = Total Area For example: 25′ x 40′ = 1,000 sq. ft. If the work area is the entire floorplan of a house or business, measuring the outside perimeter of the building will provide a good estimate for the space. While the assumption is that there will be too much material left over, it’s wise to remember that the perimeter is taking into account all of the nooks and crannies, such as closets, hallways and bedrooms.
If overhead or vertical surfaces such as walls or stairs are being surfaced, be sure to take those areas into consideration, too. Determine Which Products to Use When applying system-based products, it’s important to use all of the appropriate materials to ensure job success.
Depending on the finish that the customer has selected, specifically whether it is a traditional broom finish, stamped texture, decorative flake or metallic epoxy, it is imperative to follow the system directions for that application. Information about all of the systems, the products they include and their individual application instructions is available at and,
Once a system is chosen, it’s important to list the products needed for application by referring to individual Product Data Sheets for directions for use, mixing and application instructions as well as the coverage rates. The coverage rates are needed to determine the quantity required to complete the project.
- Calculate Quantity of Materials Now that the area is known, as well as the products needed and coverage rates, it is time to calculate how much will actually be needed.
- It’s easy to figure out – simply take the total amount of square feet that were measured for the project, then divide the total amount of square feet by the coverage rate of the material.
Square Feet of Area ÷ Coverage Rate = Quantity of Bags or Gallons For example: Let’s use the ¼” Stamp Overlay System to determine how many bags of S-1800 Super-Stamp Gray are required to stamp the total area. Super-Stamp is applied at ¼” and has a coverage rate of 25 square feet per bag.
We will use the area we measured earlier for the example.1,000 sq. ft. ÷ 25 sq. ft./bag = 40 bags Now it’s time to figure out how many gallons of S-1710 Liquid Release Agent are needed to stamp the material. The Liquid Release has a coverage rate of 250-300 square feet per gallon. We want to make sure we have enough material and avoid running short while on the project, so let’s use 250 square feet as the coverage rate.
One of the most common errors in figuring how much S-1710 Liquid Release Agent is required is forgetting that both the Super-Stamp overlayment and the stamps or skins must also be coated with the release agent.1,000 sq. ft. ÷ 250 sq. ft./gallon = 4 gallons for the Super-Stamp overlayment and 1,000 sq.
ft. ÷ 250 sq. ft./gallon = 4 gallons for the stamps or skins, therefore you will need a total of 8 gallons of S-1710 Liquid Release Agent. Once you identify the coverage rates for all the materials, you can use these formulas to calculate the appropriate amount of material you will need for your entire project.
Calculating Cost of Materials Since you will essentially be getting more product than required for the project, the initial cost of your materials will be greater than the actual cost per square foot. This will fluctuate from project to project and result in accumulation of leftover materials that can be used on future projects.
This will also help cover the cost of creating samples to aid in getting your next project approved. For example: 3.5 gallons of one product and 0.5 gallons of another may be needed, but because you are purchasing 4 gallons of the one, and 1 gallon of the other, the actual cost is more than what will be applied on the job.
To properly bid on a project, a contractor needs to determine material cost. It’s important to remember that this doesn’t include any labor, freight charges, equipment rental or any outsourced or sub-contracted services. All factors should be considered before submitting the actual bid to a client.
- After determining the amount of material needed, just add up the actual cost of all the materials.
- To calculate the cost per square foot on material for the example project, divide the total cost of materials by the square footage.
- Let’s apply a cost of $3,060.16 to determine the cost per square foot.
(Note: $3,060.16 is estimated and is not a true cost, it is only used for example) $3,060.16 ÷ 1,000 sq. ft. = $3.06/sq. ft. In the case that some services need to be subcontracted or equipment needs to be rented, those charges would be incorporated into the total landed cost.
- Continuing with the example above, if grinding equipment had to be rented for two days at $65/day ($130 total), the new total cost would come to $3,190.16 and the cost per square foot would now be $3.19/sq. ft.
- These same figures would be applied once the general overhead costs are determined, along with indirect expenses and, of course, your profit.
Once again, divide that total by the total amount of square footage and it will generate the actual cost per square foot, allowing a contractor to accurately and confidently submit their bid.
How much cement is required to build a house?
Cement – Cement plays a most significant role in the construction. It is required in preparing concrete for RCC structure, in brick masonry works, and for plastering the walls. Quality cement works well when blended with the right amount of water, sand and aggregates. 
Of the total material cost, cement required is up to 16%, Around 0.4 cement bag is used per sqft of construction that makes a total of 400 cement bags of 50 kg each is consumed for 1000 sqft house.
How is duplex value calculated?
A duplex can be evaluated in the same way that investors value apartment buildings. The rental income and expenses for both rental units should be combined to determine the Net Operating Income (NOI). Investors can then apply an appropriate cap rate to the NOI to arrive at a valuation.
How many floors does a duplex have?
The duplex house has two floors, and these floors are connected by a staircase. Here, two residential units can also share a common wall, but they are sold independently. Duplex houses with two floors are generally sold collectively. A duplex house is often confused with a twin home.
Why a duplex is better than a house?
What are some of the reasons why you think builders are going towards a lot more duplexes? – Jessica McNabb: So it is more efficient to build the duplex. You have two units coming up side by side at the very same time and it’s more cost effective. And then for the buyer, you do get more square footage, you get more land value. So it’s a win win situation.
- Karl Yeh:
- But I think one of the cons would be is that, from a single family home is that you’re right beside, I guess, your neighbor, right?
- Jessica McNabb: Right.
- Karl Yeh:
- Would you say the privacy isn’t as much as a single family home?
- Jessica McNabb:
- That is a thought that a lot of people do have as a first time buyer coming through.
- But when you’re looking at, let’s say our single family show home and walking through a duplex show home, you actually can’t tell the difference.
- The shared wall actually is above code and soundproofing and fireproofing.
- So the adjoining wall has really come a long way.
And then in terms of the size of the home for a duplex, you actually get more bang for your buck. You get bigger square footage. Karl Yeh: Now why do you get bigger square footage for a duplex? Because one would think that if you’re living in a duplex, you get less square footage than living in a single family home.
Jessica McNabb: So for the builder it’s more efficient and more cost effective to build the duplex. So in turn they can put more square footage. Karl Yeh: Multiple, yeah. Do you have anything else to add in terms of the differences between a single family and a duplex? Jessica McNabb: Well, with single family homes nowadays because, for example, or even if you’re not on a zero lot line, the houses are so close together anyways, so people don’t have that worry about buying a duplex and being so close to the neighbor anymore.
Karl Yeh: Perfect. Perfect. So the last question I have is:
Why are duplexes cheaper?
An easy and affordable learning experience for less experienced investors. – Duplexes consist of only two units compared to 100-200 plus. For obvious reasons, smaller multifamily property is more affordable than larger property. So, buying a duplex is much less expensive than buying a condo complex.
How many blocks do I need for a 3 bedroom duplex?
PHASE 3: LINTEL LEVEL TO OVERHEAD LEVEL – Here, we are going to assume that the building will be level (this means that the entire level of the building will be cast and reinforced with steel at the lintel level. This offers the advantage of helping the building behave as a unit, and helps in reducing cracking in the building).
Obviously, the length of the wall in this case will not consider openings, so we are going to make use of 100.256m as calculated from the foundation level. Hence, the length of walls = 100.256mHeight of wall = 675mm = 0.675m Total area of walls = (100.256 × 0.675) = 67.6728 m 2 Hence, the total number of blocks required to take the building from the lintel level to the roof level = 67.6728 × 10 = 676.728 = 677 blocks.
Ultimately, the total number of blocks required to complete the construction of a three-bedrooms flat = 903 + 1452 + 677 = 3032 blocks (disregarding wastage). 
Figure 8: Bungalow with completed block work To consider wastage, you can make a 20% increase, so that the number of blocks to be moulded or bought = 1.2 × 3032 = 3638 blocks. However, when you are moulding and can guarantee the quality of blocks to be moulded, 10% increase will be satisfactory for the job.
How many blocks do I need for a 4 bedroom duplex?
Average Number Of Blocks For A 4 Bedroom Bungalow by Dereformer ( m ): 11:27am On May 18, 2011 I want to start developing my one plot of land by November this year. I am a novice in building matters and as such will require assistance in the form of providing answers to the following questions: 1) Can a plot of land contain 4 bedroom bungalow? 2) what is the average number of blocks required for a 4 bedroom bungalow? 3) What is the standard measure for a plot of land? I need these answers to assist me in my preplanning. I will appreciate good responses.1 Like 1 Share Re: Average Number Of Blocks For A 4 Bedroom Bungalow by segcymoor ( m ): 11:37am On May 18, 2011 U guy just collect our info and forget us!(although u are new commer) All d same I will response. Yes a plot of land can conveniently accomodate 4 Bedrm even with Landscape and u may need to arrange for under 3800 blks( although u may nd to Design ur Building plan in order to know d exact size) The standard plot is 60’x120′ For more info, mail Arc Tony on ; [email protected](08023807960 or 07042144750 2 Likes Re: Average Number Of Blocks For A 4 Bedroom Bungalow by kuntash : 12:02pm On May 18, 2011 Dereformer: 1) Can a plot of land contain 4 bedroom bungalow? 2) what is the average number of blocks required for a 4 bedroom bungalow? 3) What is the standard measure for a plot of land? although u didnt state you location of choice for this project, I think the size of a plot of land differs from location to location, in Lagos for example, its different from many other locations, they say a Plot is 60ft by 120ft, whereas elsewhere they say a standard plot is 100ft by 100ft, All these also depends on the size of ur bungalow, if its the average room sizes of 16 x 12, Master 15 x 13 Living room 22 X 20, etc, it would be able to sit on a 60ft by 50ft comfortably Nos of blocks should be approximately 4000, good luck, for more info, pls go here, https://www.nairaland.com/nigeria/topic-606079.0.html 2 Likes Re: Average Number Of Blocks For A 4 Bedroom Bungalow by Dereformer ( m ): 1:24pm On May 18, 2011 Thanks so much Kuntash please convert the ft to meter. thanks. Re: Average Number Of Blocks For A 4 Bedroom Bungalow by Davedavy : 2:48pm On May 18, 2011 Dereformer: I want to start developing my one plot of land by November this year.I am a novice in building matters and as such will require assistance in the form of providing answers to the following questions: 1) Can a plot of land contain 4 bedroom bungalow? 2) what is the average number of blocks required for a 4 bedroom bungalow? 3) What is the standard measure for a plot of land? I need these answers to assist me in my preplanning.
I will appreciate good responses. Yes a plot of land will contain 4 bedroom bungalow perfectly.Standard plot of land should be 60 ft x 120 ft (18.288 m X 36.576 m).You will need about 4,000 blocks. You can calculate the approximate number of blocks you will need to complete your project from the plan your architect gave you.
Formular B = P/460 X R Where B = quantity of blocks P= perimeter of walls in mm R = number of rows which is usually 12 rows(Taking for a general or average purpose, the blocks from foundation to dpc(german or oversite concrete) is 4 coaches/levels. From dpc to the base of window another 4 coaches,from window to linte level 5 coaches, after lintel to roofing 2 coaches) The lenght of a block is 0.45m or 450mm or 18″ The width of thickness varies -150mm or 6″ and 225mm or 9″ which are most common.8 Likes 3 Shares Re: Average Number Of Blocks For A 4 Bedroom Bungalow by atasteve : 3:12pm On May 18, 2011 @Dereformer, I want to introduce you to this master thread https://www.nairaland.com/nigeria/topic-606079.2208.html Although you will have to contend with several pages but you can be sure that alot can be learnt if you take time to go through the thread.
By the time you are through, you will sure be a building contractor. Good enough for you Bros Kuntash has introduced you to the “Gurus” and very soon more posts will start coming in. Go for your goal and wishing you God’s speed.1 Like 1 Share Re: Average Number Of Blocks For A 4 Bedroom Bungalow by spyroxy1 ( m ): 11:44am On Nov 23, 2012,1 Like Re: Average Number Of Blocks For A 4 Bedroom Bungalow by Nobody: 12:07pm On Sep 27, 2015, Re: Average Number Of Blocks For A 4 Bedroom Bungalow by gr8ofnnetwork ( m ): 12:12pm On Nov 04, 2021 Thanks experts for this. I appreciate your submission as I look forward to the future where I will start building mine too.
How much does a duplex cost in Nigeria?
The average price of detached duplexes for sale in Nigeria is ₦160,000,000. The most expensive detached duplex costs ₦2,000,000,000 while the cheapest costs ₦26,200,000. There are 185,872 listings and 16,537 available detached duplexes for sale in Nigeria.
What is the cost of building a 5 bedroom duplex in Nigeria?
Cost of Duplex in Nigeria: Summary 5m to N42.5m.4-bedroom duplex: N30m to N57.5m.
How much does it cost to build a 30 * 40 duplex house?
30×40 HOUSE CONSTRUCTION COST IN BANGALORE FOR DUPLEX HOUSE of G+1 or G+2 FLOORS BUA: 1700 to 2600 SQ FT – Below is a detailed Table informing the Estimate for Building a house on a 30×40 Site with different scenarios.
| 30×40 Construction cost in Bangalore / 30×40 House Construction cost in Bangalore Duplex/Rental | No of Floors G+1 G+2 G+3 G+4 | Built up Area (BUA) | Total 30×40 Construction cost @Rs 1800 /sq ft |
|---|---|---|---|
| 30×40 Ground Floor | Ground Floor G | 750 sq ft | Rs 17 Lakhs |
| 30×40 Ground + 1 Floor | G+1 Floor | 1700 sq ft | Rs 31 Lakhs |
| 30×40 Ground + 2 Floors | G+2 Floors | 2400 sq ft | Rs 44 Lakhs |
| 30×40 Ground + 3 Floors | G+3 Floors | 3200 sq ft | Rs 58 Lakhs |
| 30×40 Ground + 4 Floors | G+4 Floors | 4100 sq ft | Rs 74 Lakhs |
| 30×40 Duplex House G+1 Floor @ 2200/sq ft | G+1 Floor Duplex House | 1800 sq ft | Rs 39 Lakhs |
| 30×40 Duplex House G+2 Floors @2200/sq ft | G+2 Floors Duplex House | 2450 sq ft | Rs 54 Lakhs |
| 30×40 Rental Houses G+3 Floors | G+3 Floors Rental | 3150 sq ft | Rs 55 Lakhs |
| 30×40 Rental House G+4 Floors | G+4 Floors Rental | 4150 sq ft | Rs 75 Lakhs |
If one needs to know the 30×40 Duplex house construction in Bangalore on a 30×40 site then the built-up area comes in between 1700 sq ft to 1800 sq ft. It again depends on the kind of requirements given to the Architects for designing. Generally, one can construct a 3BHK Duplex house of G+1 or G+2 floors; also, if the client has sufficient budget, then one complete floor can be left for the parking area, which will be termed as “Stilt Floor” and the upper called Ground floor where the Duplex house starts. It’s crucial to meet the Architect who is assigned to work on the project and discuss all your design needs, requirements that you need to implement to your House concerning the planned budget as one needs to make sure that the construction cost escalation is kept to a minimum during the house construction process.
- Below are all the planning options to know the 30×40 cost of construction in Bangalore for a Duplex house.
- The construction rates are explained based on each item to help you plan your budget.30×40 DUPLEX CONSTRUCTION COST G+1 or G+2 FLOORS OF BUA: 1800 SQ FT If you are having a limited budget of around Rs 45 to 55 lacs, then this would be the ideal option for you to choose.
The overall built-up area or BUA comes approximately 1700 to 1800 sq ft for complete house construction of G+1 Floors, There would decent space left to take of present and future parking needs; the residential Architects hired for your project can work as per your needs and given requirements.
- It’s also very important to freeze the floor plans with clearly marked 2D interior layout showing all furniture layouts which will help the client finalize the floor plans.
- As any changes or alterations made to the plans during the house construction will delay the project and increase the cost of construction.
Hence, take some time in finalizing the Floor plans and 3D Residential House Elevations with your Architects before the actual construction begins on site. The general requirements for a 30×40 Duplex house area are mentioned below, along with the project’s construction rates,
- Ground Floor: Car parking 1nos + 4 Two wheeler parking slots + Living 13×19 + Dining for 6 of 110 sq ft + Kitchen 10×12 + Outside utility + Store room attached to Kitchen + Master Bed room 145 sq ft with attached bath room + Common bath + Pujja room of 5×6 + Internal Staircase.
- First Floor: Balcony overlooking the road + Family living of 10×16 + Roof cutout double-height overlooking living below + 1 Master bedroom with study + Guest bedroom + Internal staircase continued to Terrace area.
Second Floor: Solar provision + Overhead tank + Staircase headroom + Open terrace.30×40 COST OF CONSTRUCTION FOR DUPLEX HOUSE STILT + G+2 or G+3 FLOORS BUA: 2600 SQ FT If the Client has a budget of Rs 60 lacs+ for his residential house construction, this would be the preferred option, Scope for landscaping for more greenery, More balconies resulting in more inside-outside spaces, Better elevation possible, Staircase can be a modern concept using prefab concepts, Larger windows for better ventilation and natural light; More luxury spaces can be created.
The main advantage of constructing a Duplex house above floors are more natural light, more ventilation, less noise as the duplex will be above road level, which will help in cutting down street noise, more space as one need not leave space for parking area this additional space can be well utilized for better planning, Larger and wider balconies, etc.
Hence, if the client has the needed budget for building his Duplex house on his 30×40 or 1200 sq ft site, this would be a better option as it has all the advantages mentioned above. The only drawback of this option is that one needs to climb one floor to access the Duplex house, which might be difficult for older adults.
This can be avoided by providing a lift that will add additional cost to the overall project. Stilt Floor: Parking for 4 cars + 10 Two-wheelers + Servant quarters (if required) + External staircase leading to upper floors. Ground Floor: Foyer of 8×8 with shoe rack + Open living room 180sq ft + 10×16 Kitchen area + Dining area for 6 persons + Puja room of 7×6 + Common washroom without shower + 174 sq ft Master Bedroom with walk-in closet attached bath + Internal staircase.
First Floor: Family lounge of 180 sq ft with attached Balcony of 12×6 + Double height provision either at dining or living room + Master bedroom of 170 sq ft with study zone attached to bathroom + Childers bedroom area 13×15 with attached bath + open Library at lounge area + Internal staircase to the second floor.
How much does it cost to build a 30×40 duplex house?
The scenario of 30×40 House construction cost in Bangalore: –
- 30×40 Ground Floor : Rs 19 Lakhs.
- 30×40 G+1 Floor: Rs 42 Lakhs.
- 30×40 G+2 Floors: Rs 58 Lakhs.
- 30×40 G+3 Floors: Rs 78 Lakhs.
- 30×40 G+4 Floors: Rs 1cr.
If you prefer having a lavish House that fulfils your premium needs, then be prepared to spend additional Rs 600 to 800 per sq ft on top of Standard 1200 sq ft / 30×40 House construction in Bangalore. When you combine all of these factors, you will get the actual cost of constructing the House in Bangalore. Note: The above-proposed construction cost is based on a tentative assumption of standard House construction on a 30×40 Site in Bangalore. The actual construction cost will vary as per the requirements and materials used. At the current market price, constructing a 30×40 area would start from Rs.39 lakhs and go up to Rs.1 crore+ for creating a duplex house. In addition, the Interior of the building and amenities will consume more budget, which you can keep aside an additional budget of Rs 20 to 40 lakhs, Thus, you should be aware of these factors. I have seen many buildings in Bangalore built under Rs.50 lakhs, The price is justified per the standard Construction and elevation for the duplex house.
