How To Clean New House After Construction?

How To Clean New House After Construction
How do you clean a new construction home? – Start by gathering your cleaning supplies in an easy-to-carry basket or bag. These supplies include a vacuum cleaner, rubber gloves, dust mask, bucket, paper towels, brush, sponge, soap, feather duster, rubbing alcohol, rags, dustpan, and a cleaning solution. Once you’ve put your dust mask and rubber gloves on, start cleaning:

Wipe down all ceilings using a damp sponge. Remove window labels. Vacuum all window tracks. Wash the interior and exterior of all windows. Vacuum all the cupboards and drawers. Put your cleaning solution in a bucket, grab some soft rags, and wipe down all surfaces. Thoroughly clean the bathrooms and the kitchen. Vacuum the interior of the cooling and heating ducts. Vacuum the carpets, or wash them with carpet shampoo if they’re very dirty. Wipe down and dust the light fixtures. Clean the thresholds. Thoroughly mop the floors. Finish by sweeping and vacuuming the garage.

Take special care to remove construction dust from hard-to-reach or unnoticeable places such as behind radiators and toilet bowls, on top of electrical outlet covers, and so on. Failing to do so can cause serious health problems for the occupants in the long term.

How do you clean construction dirt?

Post-Construction Cleaning Checklist – 1. Vacuum Carpets & Upholstery It’s all too easy for dust and dirt particles to embed themselves in curtains, upholstered furniture and carpeted floors. If allowed to settle after construction, the result can not only look filthy, but also cause itchy, irritating reactions for friends, family or guests.

Vacuum all soft surfaces, paying close attention to the details. Remove and vacuum each furniture cushion, and the underlying frames. Try vacuuming twice if you feel any residual dust after the first round.2. Wipe Down Hard Surfaces Clean surfaces from the top down. Start by wiping the dust off your walls – yes, even your walls collect dust during construction.

Dry dusting is the safest way to remove the particles without damaging a wall’s surface, but a damp cloth can also be used depending on your type of paint or wall covering. Refer to the paint or wallpaper manufacturer before using any moisture, and test a small area before proceeding.

Moldings and cabinets are another favorite resting spot for dust particles. Take a duster to these areas next. Clean the interior shelves of all cabinets, paying special attention to those hard-to-reach corners. Wipe off countertops and any other flat surfaces before tackling the dirt and debris that’s on or near the floor.

Then, sweep out any visible dust, and mop your hard floors from wall to wall.3. Clean Air Vents & Replace Filters In a large home renovation project means, dust and debris will mingle with the air itself, making its way to your vents. Even if you only renovated one part of your home, treating the air vents and filters in that space is critical to reduce the amount of dust that can spread through the rest of your home.

Remove the vent covers from the surrounding walls and ceilings, clean each one with soap and warm water, and let them dry thoroughly. Replace any exposed air filters with fresh ones before replacing the vent covers. Breathing dusty air can lead to allergies and respiratory issues, so remember not to skip this step! 4.

Don’t Forget About the Little Things Clean any other furniture or items in the renovation zone for a fully dust-free living space. Here’s a quick list of commonly overlooked areas:

You might be interested:  What Is Isolated Footing In Construction?

Ceiling fan bladesLight fixturesLamp shadesElectronicsSmall appliancesDecorative items

We don’t blame you if you don’t want to deal with the mess after a disruptive renovation process. If that’s the case, call ServiceMaster Clean. Our expert cleaning crews are available 24/7/365 to come over and do the post-construction cleaning for you – quickly, safely and effectively.

How do you clean walls when moving into a new house?

Walls – One thing you’ll probably never do again, unless you have young kids, is wash down the walls in your new home. But it pays to do it once, unless you plan on painting immediately. Wash walls with a solution of water and vinegar, which is safe on most surfaces.

Does opening windows help with construction dust?

1. Ventilate – Open windows and doors and turn on fans to push sawdust and other contaminants out. On top of ventilating during the actual renovation process, you’ll want to open up your windows and doors for a couple of days when the process is done. This will give fumes from drying paint and varnish a chance to air out.

How do you remove silica dust from your house?

5. Equipment can Mitigate Exposure – Respirators, wet-cutting, and tools fitted with vacuum removal systems can keep crystalline silica dust from reaching OSHA’s 50 micrograms per cubic foot of air limit. Vacuum removal is the most effective method of controlling silica dust created by power tools.

What does a builders clean include?

A builder’s clean definition, in its simplest form, typically involves cleaning throughout building projects and ending in a thorough clean once the project/work has been completed. A domestic clean, however, involves a light clean to domestic properties on a regular basis.

Where do I start to clean a new house?

Bathrooms – The best place to start your is the bathroom. It was probably used during the move-out and you will want to use it during move-in, so it is a logical place to clean first. If there are any stains on the sinks, showers, or toilets, you can start getting rid of them with some vinegar and baking soda.

  1. Apply a mixture to stains and let it sit for 30 minutes to an hour, then the acid of the vinegar should have weakened the stain and you can scrub it away.
  2. If there is stained tile grout, you can apply a paste of baking soda and then add some vinegar, let it sit for up to half an hour, then scrub with a toothbrush.

For the toilet, wipe down all surfaces with a disinfectant cleaner like vinegar or bleach. For a truly deep clean, fill the toilet’s water tank with vinegar and let it sit overnight. This will eliminate grime that can house bacteria or wear on the toilet’s moving parts.

What room in the house should be cleaned first?

Clean the ‘wet areas’ first Bathrooms and kitchens are known as ‘wet areas’. These often take the most time to clean. That’s why they should be first in the order you clean your house. Once you’ve done step 1 and 3, dust everything and then get down to work in your bathrooms and kitchen.

What kills dust in the air?

Download Article Download Article Dust in the air of your home can cause breathing and allergy problems for all of your family members. There may be a few reasons for dust in the air of your home, like your air filters becoming worn out or dirty fans circulating dust.

  1. 1 Put new filters in your HVAC (heating, ventilation, and air conditioning) system. The air in your home can become overly dusty if the filters in your furnace and air conditioning systems are old and dirty. Change out the filters every 2 to 3 months and put a new filter in when you turn on a system for the first time each year.
    • How often you need to change out your filters does depend on your specific heating and cooling system, what kind of filters you use, and what the conditions in your home are. For example, if you have several cats or dogs, you should be changing out your filter every 3 weeks.
    • If you are unsure, talk to the person that services your HVAC system about how often you should be changing your filters out.
    • By putting a new filter in you will be filtering your air every time you turn on your heating or cooling system.

    Tip: Some systems have reusable filters that need to be washed, dried, and then reused. These will save you money over time but will take a bit more effort to use.

  2. 2 Purchase a HEPA (high-efficiency particulate air) air purifier. HEPA air purifiers are the best for getting rid of dust because they filter out even fine matter in the air. These air purifiers are widely available at big box stores and from online retailers.
    • Typically HEPA air purifiers are stand-alone units that plug into a wall outlet.
    • Put your new air purifier in the room that feels the dustiest. Often this will be your bedroom, as the linens and the amount to time you spend in there creates a lot of dust.


  3. 3 Clean or replace the filters in your air purifier often. As a filter gets dirty, it’s less able to filter out dust in the air. Follow the directions that came on your air filter for how often to clean it. However, don’t be afraid to clean it more often than recommended.
    • Many air purifiers come with a pre-filter and a filter. The pre-filter will often be washable but the larger main filter needs to be replaced when it gets dirty.
    • Whether a filter is cleaned or replaced depends on your specific air purifier. In general, it costs more for cleanable filters but you will save money over time by not having to replace your filter.
  4. 4 Don’t buy houseplants thinking they will remove dust in the air. Many people believe that houseplants improve air quality in a home but they don’t make the air less dusty. In fact, the soil that plants live in can add to dust to the air and some plants will even add pollen and other particles to the air.
    • This doesn’t mean that houseplants aren’t great to have in your home! They just aren’t a magical solution for dust problems.
  5. Advertisement

  1. 1 Vacuum your house twice a week. Vacuuming regularly is one of the best things you can do to eliminate dust in the air. Surfaces that you should be vacuuming include rugs, carpets, sofas, under beds, window sills, and baseboards.
    • When you vacuum it removes all of the debris and dirt that gets kicked up into the air when you walk around or when there is air movement.
    • Make sure you are using a HEPA (high-efficiency particulate air) filter in your vacuum. This will help ensure that the dust that your vacuum sucks up isn’t pushed through the filter and back out into the air.
  2. 2 Mop hard floor surfaces twice a week. Dirt and debris that builds up on your hard floor surfaces also gets kicked up into the air. To prevent this, use a damp mop to clean floor areas that can’t be vacuumed.
    • You can also use a dry dust mop on your hard surfaces. However, they do not remove as much dust as a wet mop does.

    Tip: Before mopping, sweep the floor with a broom. This may throw a little bit of dust into the air but it will help get the floor cleaner overall.

  3. 3 Use a microfiber cloth or duster to dust hard surfaces. Microfiber products are great at trapping the dust that they collect from surfaces. You can either get your cloth slightly damp or use it dry, depending on whether the surface you are cleaning can get damp.
    • Traditional old feather dusters do not do a good job at trapping the dust they have collected. Instead, they tend to throw a lot of dust into the air and onto other surfaces.
  4. 4 Wash your sheets weekly. Since we all spend a lot of time in your sheets, they tend to collect a lot of dust and grime that comes off of our bodies. However, if we wash our sheets every week, the dust and grime doesn’t have a chance to get into our air.
    • Washing your sheets weekly also reduces the number of dust mites, bacteria, and other allergens in your bed that can impact your breathing negatively.
  5. Advertisement

  1. 1 Remove your shoes when you come into your house. Controlling the amount of dirt and grime that comes into your home can greatly reduce the amount of dust and allergens that end up in your air. When you wear your shoes inside, the dirt and allergens from outside get transferred to your floors and end up in your air.
  2. 2 Keep your doors and windows closed as much as possible. A lot of dust and dirt can come into your home through open windows and doors. Although it may be tempting to get a fresh breeze blowing through your home, remember that that breeze includes dust and allergens that will settle on your home surfaces and get kicked up when you walk around.
    • How much dust will come into your home through an open window or door depends a lot on where you live, what time of year it is, and what the air conditions are currently. Some areas normally have more dust and debris in the air than others, so take your specific location into consideration.
  3. 3 Seal cracks or gaps in your house. Dust can get into your home through all openings. Take the time to caulk or spackle any holes in your walls so that your home is more airtight. Also, seal up gaps around doors and windows with weatherstripping.
  4. 4 Close your chimney flue. If you have a fireplace, it’s important to keep the flue closed when it’s not in use. Closing it will help seal out the outside and keep dust in the air at a minimum. This is especially important if it is windy outside, as the wind can go down your chimney and push dust and debris from the chimney into your home. Tip: You should also get your chimney cleaned regularly so that there is as little debris in it as possible.
  5. 5 Reduce the clutter in your house. Having a lot of irregular surfaces in your home makes it hard to clean effectively. Start by getting rid of that you don’t need. Then clean up needed items by putting them away in closets and cupboards. Get rid of items that you don’t need and you will have open spaces that can be dusted or vacuumed quickly and regularly.
  6. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement Thanks to all authors for creating a page that has been read 75,682 times.

What clears the air of dust?

HEPA filters – High-efficiency particulate air filters, known as HEPA filters, can remove 99.97 percent of dust particles that are 3 microns in diameter, according to the Environmental Protection Agency (EPA), As of now, air purifiers that have a HEPA filter tend to be the best at filtering out dust from your space.

Is construction site dust harmful?

What you should know – Regularly breathing construction dust can cause diseases like lung cancer, asthma, Chronic Obstructive Pulmonary Disease (COPD) and silicosis, Construction workers have a high risk of developing these diseases because many common construction tasks can create high dust levels.

Read some examples of the impact that dust has had on people’s lives FAQs on construction dust