How To Make Paper Flowers With Construction Paper Step By Step?

How To Make Paper Flowers With Construction Paper Step By Step
Download Article Download Article Paper flowers are perfect for weddings, get-well-soons, birthdays, baby showers, decorations, and just a kind “thinking of you” moment for anyone in your life. They are easy and cheap to make, so you really don’t have to worry about the cost or your level of skill.

  1. 1 Paint watercolor paper or use cardstock or construction paper. A really nice way to get paper flowers with interesting, nuanced petals is to paint on watercolor paper. It allows for slightly different shades within the same piece that look natural and reminiscent of a real flower.
    • For watercolor paper, you simply dip your brush in a bit of clean water, add some watercolor paint to the tips of the brush, and go over the paper. The best part about it is that it’s supposed to look slightly different in every spot, so you don’t have to worry about shading or blending.
    • You can also use cardstock or construction paper, too, and it’s quicker and cheaper. You just won’t have the soft gradient of watercolor paper; however, you could choose a more vivid color with this type instead.
  2. 2 Measure 1, 2, and 3-inch squares. With this method, we’re going to assume you want to make a handful of different paper flowers. Let’s make three different sizes, then: 1″ (2.5cm) flowers, 2″ (5cm) flowers, and 3″ (7.5cm) flowers. All you need to do is cut squares that are these sizes (in both length and width) and pile them up.
    • Make a whole bunch. Each flower will require at least 12 squares or so. And it’s not that the 1″ squares are in the middle and the 3″ squares are on the outside – instead, it’s just the amount you roll them up to get them bigger and smaller. A 3″ flower, for example, will be made entirely of 3″ squares.

    Advertisement

  3. 3 Fold them in half and cut the open edge into a petal shape. Take a handful of the same-size square in your hand and fold them all in half, layering them like an onion so you can cut them all at the same time.
    • To make your cut, place your scissors on the open side and cut it into a half-arch type of thing (that is, rounded at the top). When you open it up, you’ll notice that it’s now in the shape of a petal.
  4. 4 Roll the petals. Flower petals aren’t flat, so you don’t want yours to be either. Roll them up to bend the papers into a more flower-like shape. The more intense your rolling, the more curved they’ll be.
    • And then unroll them. When you unroll them, they’ll maintain a bit of the curve of the roll. Can you see how they might fit together to form a flower?
  5. 5 Put hot glue in the corners, wrapping the first one very tightly. For the very center of your flower, put hot glue in the corners of the paper and roll it back into a tight bud shape. The center of the flower will be more enclosed and the petals will spread out from there.
    • Hold it there for a second, being careful not to get any hot glue on your fingers. You now have the very center of your flower and can start attaching petals.
  6. 6 Glue the petals to each other in an open fashion, layering them. Take another square of the same size and put hot glue in the corners. Then, taking the bud in your opposite hand, glue the petal the bud. Since you’re still on the second layer of petals, this one, too, will be highly curved and close to the bud. As you expand, the petals should get more and more splayed out.
    • Every layer should peep out from between the layer before. In the valley where the two petals meet in one layer should be the center of the petal from the next layer. And again, with each succeeding layer, your petals should get less and less rolled up.
    • Once your layers reach the size and width that you want, you’re done. It’s as simple as that! With this technique, they look even better in groups, so don’t stop now. Make a few to stick together to make their beauty (and your creativity) exponentially more remarkable.
  7. Advertisement

  1. 1 Cut your paper into a square. Any size square will work. Really. That being said, smaller squares, a few inches (7.5 cm or so) across will be easier to work with and handle when you’re assembling the flower.
    • For the paper, construction, watercolor, or scrapbook paper works best. Anything that’s on the stiffer side and colorful will do the trick.
  2. 2 Draw a spiral on the paper. Take a pencil and lightly draw a spiral shape starting from the outer edges of the square of paper. Then simply freehand a spiral – the more room in between the lines, the thicker your petals will be. It’s as simple as that.
    • It doesn’t have to be perfect, uniform, or even by any means. A lopsided, wonky spiral will be just as adorable as a spiral that was meticulously drawn down to the millimeter. Just draw a spiral like your inner seven-year-old self might draw a spiral and that’ll be great.
  3. 3 Cut it out and roll it around the tip of a pencil or Q-tip. Cut along the lines of the spiral, creating a curly ring of paper. It will naturally cut off the edges and leave you with one giant curly-cue. Then, starting at the very center, roll it around the tip of something small, like a pencil or Q-tip.
    • To roll, hold the very center to the edge of your pencil or Q-tip. then roll it up like a spool of ribbon, each length on top of the other. As your spiral starts to get bigger, you’ll notice that it starts to move downward. This is how it’s supposed to be.
  4. 4 Unroll and secure the bottom with a dab of hot glue if desired. Take the pencil or Q-tip out and you’ll be left with a rolled paper that looks very much like a flower. To keep it together, dab the bottom side with hot glue – and you’re done. Talk about easy!
    • Your first one or two may not be perfect, but as you keep going you’ll be able to figure out what will create the look you’re going for. You’ll also notice that as you create more, they look neater and neater.
    • You could also attach a pipe cleaner or a hanger wrapped in green planter’s tape to the bottom for a stem. Who doesn’t love a homemade bouquet?
  5. Advertisement

  1. 1 Choose a variety of different colored pieces of tissue paper. A classic flower will be made up of only one shade, but if you’re feeling adventurous, combine a few together. For each flower, you’ll need 3 or 4 sheets of tissue paper.
    • When you’ve chosen your tissue paper, place them together, lined up in a pile.
  2. 2 Cut strips from the tissue paper. How much you should cut will depend on the size of the flower you want to make. As a general rule of thumb cut a strip twice as big as the flower you want to create.
    • If you’re making several flowers experiment with different sizes. Just cut strips that are of various widths and it will automatically create smaller and bigger flowers.
  3. 3 Cut vertical lines into the strip, leaving an inch or so untouched. Go down the strip cutting little snips into the tissue paper at even intervals. If you want teeny petals, make the snips close together; if you want larger petals, make them farther apart.
    • Leave an inch or so of tissue paper untouched at one end of the strip. This will be the part of the flower that you work with and use as your base, so you don’t want it shredded.
    • The strip should still include every layer of tissue paper that you started with. No need to cut one sheet at a time.
  4. 4 Take a small piece of floral wire and bend it at the top. Wrap a piece of masking tape around the loop once it’s formed. This will be the bud of your flower and will give the flower something to structure itself around.
    • If you don’t want a masking tape bud, you can either color the masking tape or cover it with more tissue paper. You could also try leaving the floral wire exposed. With enough petals, it may blend right in.
  5. 5 Take your cut up strip and wrap it around the stem. Roll and roll and roll until you come to the other side of the strip and it’s all wrapped up. Then, take another piece of masking tape and wrap it around the base of the paper, securing it in place. Do this to as many layers as you want of paper.
    • Once the tape is on, fluff your “petals” to give them a more flowery look. Spread them out and squish them a little to get them to sprawl out like a carnation.
  6. 6 After you have made your flower, take the floral tape and wrap it over the masking tape. Floral tape is green and will look more like a stem. Then you can take the end of the tape and attach it to anything, whether it’s a card or the end of a pen.
    • If your flower still seems like it’s missing something, try wrapping a ribbon around the base. This also provides you another way to attach the flower to something without using the tape. A ribbon is much more delicate and will emphasize the cuteness of your flower.
  7. Advertisement

Add New Question

Question How can I make rose paper flowers? Dennison paper company had pamphlets showing how to make paper roses. A strip of paper cut in a scalloped pattern wrapped around a wire stem is one method. Individual petals can be cut, shaped and glued onto a wire stem. It is possible to adapt ribbon roses methods to make similar paper versions. In origami, the Kawasaki rose can be made from folding a single piece of paper. There is a variation made from what is described as “just twirl roses”.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

If you want, put the flowers in a vase. They’ll stay beautiful forever.

Thanks for submitting a tip for review! Advertisement

While making flowers, children should work with scissors only under adult supervision.

Advertisement

  • Watercolor, construction paper, or cardstock
  • Scissors
  • Ruler
  • Hot glue
  • Cardstock or construction paper
  • Scissors
  • Pencil or pen (for writing)
  • Q-tip or pencil (for rolling)
  • Ruler (optional)
  • Hot glue (optional)
  • Several sheets of tissue paper
  • Scissors
  • Floral wire
  • Masking tape
  • Floral tape
  • Ribbon (optional)

Article Summary X To make paper flowers, cut various size squares out of pieces of colorful paper or cardstock, and fold them in half. Use your scissors to round the edges of the squares into an oval petal shape. Then, unfold the squares. Next, roll the papers lengthwise to curve the petals.

How do you make paper flowers?

Download Article Download Article Paper flowers are perfect for weddings, get-well-soons, birthdays, baby showers, decorations, and just a kind “thinking of you” moment for anyone in your life. They are easy and cheap to make, so you really don’t have to worry about the cost or your level of skill.

  1. 1 Paint watercolor paper or use cardstock or construction paper. A really nice way to get paper flowers with interesting, nuanced petals is to paint on watercolor paper. It allows for slightly different shades within the same piece that look natural and reminiscent of a real flower.
    • For watercolor paper, you simply dip your brush in a bit of clean water, add some watercolor paint to the tips of the brush, and go over the paper. The best part about it is that it’s supposed to look slightly different in every spot, so you don’t have to worry about shading or blending.
    • You can also use cardstock or construction paper, too, and it’s quicker and cheaper. You just won’t have the soft gradient of watercolor paper; however, you could choose a more vivid color with this type instead.
  2. 2 Measure 1, 2, and 3-inch squares. With this method, we’re going to assume you want to make a handful of different paper flowers. Let’s make three different sizes, then: 1″ (2.5cm) flowers, 2″ (5cm) flowers, and 3″ (7.5cm) flowers. All you need to do is cut squares that are these sizes (in both length and width) and pile them up.
    • Make a whole bunch. Each flower will require at least 12 squares or so. And it’s not that the 1″ squares are in the middle and the 3″ squares are on the outside – instead, it’s just the amount you roll them up to get them bigger and smaller. A 3″ flower, for example, will be made entirely of 3″ squares.

    Advertisement

  3. 3 Fold them in half and cut the open edge into a petal shape. Take a handful of the same-size square in your hand and fold them all in half, layering them like an onion so you can cut them all at the same time.
    • To make your cut, place your scissors on the open side and cut it into a half-arch type of thing (that is, rounded at the top). When you open it up, you’ll notice that it’s now in the shape of a petal.
  4. 4 Roll the petals. Flower petals aren’t flat, so you don’t want yours to be either. Roll them up to bend the papers into a more flower-like shape. The more intense your rolling, the more curved they’ll be.
    • And then unroll them. When you unroll them, they’ll maintain a bit of the curve of the roll. Can you see how they might fit together to form a flower?
  5. 5 Put hot glue in the corners, wrapping the first one very tightly. For the very center of your flower, put hot glue in the corners of the paper and roll it back into a tight bud shape. The center of the flower will be more enclosed and the petals will spread out from there.
    • Hold it there for a second, being careful not to get any hot glue on your fingers. You now have the very center of your flower and can start attaching petals.
  6. 6 Glue the petals to each other in an open fashion, layering them. Take another square of the same size and put hot glue in the corners. Then, taking the bud in your opposite hand, glue the petal the bud. Since you’re still on the second layer of petals, this one, too, will be highly curved and close to the bud. As you expand, the petals should get more and more splayed out.
    • Every layer should peep out from between the layer before. In the valley where the two petals meet in one layer should be the center of the petal from the next layer. And again, with each succeeding layer, your petals should get less and less rolled up.
    • Once your layers reach the size and width that you want, you’re done. It’s as simple as that! With this technique, they look even better in groups, so don’t stop now. Make a few to stick together to make their beauty (and your creativity) exponentially more remarkable.
  7. Advertisement

  1. 1 Cut your paper into a square. Any size square will work. Really. That being said, smaller squares, a few inches (7.5 cm or so) across will be easier to work with and handle when you’re assembling the flower.
    • For the paper, construction, watercolor, or scrapbook paper works best. Anything that’s on the stiffer side and colorful will do the trick.
  2. 2 Draw a spiral on the paper. Take a pencil and lightly draw a spiral shape starting from the outer edges of the square of paper. Then simply freehand a spiral – the more room in between the lines, the thicker your petals will be. It’s as simple as that.
    • It doesn’t have to be perfect, uniform, or even by any means. A lopsided, wonky spiral will be just as adorable as a spiral that was meticulously drawn down to the millimeter. Just draw a spiral like your inner seven-year-old self might draw a spiral and that’ll be great.
  3. 3 Cut it out and roll it around the tip of a pencil or Q-tip. Cut along the lines of the spiral, creating a curly ring of paper. It will naturally cut off the edges and leave you with one giant curly-cue. Then, starting at the very center, roll it around the tip of something small, like a pencil or Q-tip.
    • To roll, hold the very center to the edge of your pencil or Q-tip. then roll it up like a spool of ribbon, each length on top of the other. As your spiral starts to get bigger, you’ll notice that it starts to move downward. This is how it’s supposed to be.
  4. 4 Unroll and secure the bottom with a dab of hot glue if desired. Take the pencil or Q-tip out and you’ll be left with a rolled paper that looks very much like a flower. To keep it together, dab the bottom side with hot glue – and you’re done. Talk about easy!
    • Your first one or two may not be perfect, but as you keep going you’ll be able to figure out what will create the look you’re going for. You’ll also notice that as you create more, they look neater and neater.
    • You could also attach a pipe cleaner or a hanger wrapped in green planter’s tape to the bottom for a stem. Who doesn’t love a homemade bouquet?
  5. Advertisement

  1. 1 Choose a variety of different colored pieces of tissue paper. A classic flower will be made up of only one shade, but if you’re feeling adventurous, combine a few together. For each flower, you’ll need 3 or 4 sheets of tissue paper.
    • When you’ve chosen your tissue paper, place them together, lined up in a pile.
  2. 2 Cut strips from the tissue paper. How much you should cut will depend on the size of the flower you want to make. As a general rule of thumb cut a strip twice as big as the flower you want to create.
    • If you’re making several flowers experiment with different sizes. Just cut strips that are of various widths and it will automatically create smaller and bigger flowers.
  3. 3 Cut vertical lines into the strip, leaving an inch or so untouched. Go down the strip cutting little snips into the tissue paper at even intervals. If you want teeny petals, make the snips close together; if you want larger petals, make them farther apart.
    • Leave an inch or so of tissue paper untouched at one end of the strip. This will be the part of the flower that you work with and use as your base, so you don’t want it shredded.
    • The strip should still include every layer of tissue paper that you started with. No need to cut one sheet at a time.
  4. 4 Take a small piece of floral wire and bend it at the top. Wrap a piece of masking tape around the loop once it’s formed. This will be the bud of your flower and will give the flower something to structure itself around.
    • If you don’t want a masking tape bud, you can either color the masking tape or cover it with more tissue paper. You could also try leaving the floral wire exposed. With enough petals, it may blend right in.
  5. 5 Take your cut up strip and wrap it around the stem. Roll and roll and roll until you come to the other side of the strip and it’s all wrapped up. Then, take another piece of masking tape and wrap it around the base of the paper, securing it in place. Do this to as many layers as you want of paper.
    • Once the tape is on, fluff your “petals” to give them a more flowery look. Spread them out and squish them a little to get them to sprawl out like a carnation.
  6. 6 After you have made your flower, take the floral tape and wrap it over the masking tape. Floral tape is green and will look more like a stem. Then you can take the end of the tape and attach it to anything, whether it’s a card or the end of a pen.
    • If your flower still seems like it’s missing something, try wrapping a ribbon around the base. This also provides you another way to attach the flower to something without using the tape. A ribbon is much more delicate and will emphasize the cuteness of your flower.
  7. Advertisement

Add New Question

Question How can I make rose paper flowers? Dennison paper company had pamphlets showing how to make paper roses. A strip of paper cut in a scalloped pattern wrapped around a wire stem is one method. Individual petals can be cut, shaped and glued onto a wire stem. It is possible to adapt ribbon roses methods to make similar paper versions. In origami, the Kawasaki rose can be made from folding a single piece of paper. There is a variation made from what is described as “just twirl roses”.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

If you want, put the flowers in a vase. They’ll stay beautiful forever.

Thanks for submitting a tip for review! Advertisement

While making flowers, children should work with scissors only under adult supervision.

Advertisement

  • Watercolor, construction paper, or cardstock
  • Scissors
  • Ruler
  • Hot glue
  • Cardstock or construction paper
  • Scissors
  • Pencil or pen (for writing)
  • Q-tip or pencil (for rolling)
  • Ruler (optional)
  • Hot glue (optional)
  • Several sheets of tissue paper
  • Scissors
  • Floral wire
  • Masking tape
  • Floral tape
  • Ribbon (optional)

Article Summary X To make paper flowers, cut various size squares out of pieces of colorful paper or cardstock, and fold them in half. Use your scissors to round the edges of the squares into an oval petal shape. Then, unfold the squares. Next, roll the papers lengthwise to curve the petals.

What can you make with paperpapers?

13 DIY Paper Flower Tutorials You Can Make Right Now These DIY paper flower tutorials will teach you how to that will never wilt. These are perfect, backdrops for weddings, bouquets, and even individual flowers that will look great anywhere in your home.

  1. Most of these projects are just right for the beginner who would like to learn how to make paper flowers, but there are a few intermediate projects that are great for the eager beginner or someone who’s up for a challenge.
  2. These paper flowers use a such as cardstock,, tissue paper, metallic text-weight paper, and crepe paper.

You’ll be using these materials to make DIY paper flowers like roses, peonies, dahlias, anemones, cherry blossoms, and other that you’ll love creating. : 13 DIY Paper Flower Tutorials You Can Make Right Now

What to do with construction paper flowers?

10. DIY Metallic Paper Gardenia – | My list of construction paper flower templates and tutorials won’t be complete without this. What I love about it is it’s unusual. How many of you work with metallic paper? This design should give you a reason to use it in your future paper craft projects,

  1. Don’t worry, this is simply gorgeous and elegant to make—just in time for Mother’s Day! Watch this easy and creative paper flowers from VENTUNO ART:  These projects tell you to never underestimate your construction paper.
  2. You can always go beyond using it for borders and trims.
  3. With construction paper flowers, you will always have colorful decors in your home every single day.

What’s more, you can teach how to make paper flower for kids! Try one of them today, and when you get to do it, do one more. You may master all without you knowing it. Did you enjoy our list of construction paper flowers? Let us know below in the comments section! Up Next:

How To Perfectly Press Flowers 21 DIY Room Decor Ideas For Crafters (Who Are Also Renters) 21 Ways to Reuse A Wine Barrel On Your Homestead

Stay connected with us on Facebook, Twitter, Pinterest, and Instagram ! Editor’s Note: This article was originally published on May 30, 2016, and has been updated for quality and relevancy.

Why DIY paper flowers are a good idea?

These DIY paper flowers also push you to be more creative. After all, you can play around with colors. You can stick to your favorite shades or mix and match them.3. Distressed Vintage Flower Garland Do you want the shabby chic vibe or the vintage look in your home? This is a great idea to having beautiful flowers at hand.

How to make roses with construction paper?

  • The CD should be smooth-edged so that you can come up with a circle.
  • You can draw a circle around paper around the CD line for better results.
  • Next,you cut the round piece of paper into a spiral from the outside inwards.
  • You can use decorative scissors to make the roses more beautiful.

How do you make a simple paper flower?

Tissue Paper Flowers: Easy, Kid-Friendly DIY Craft Tissue paper flowers are an that’s perfect for a variety of holidays and occasions. Kids of all ages can participate in this, School-age kids will particularly love this craft because it allows them to create decor that can be used and admired.

  • 1 green chenille stem/pipe cleaner
  • 1 sheet of green cardstock paper or construction paper
  • 3 sheets (12-by-6-inch sheets or larger) of colored tissue paper
  • Ruler
  • Scissors
  • Glue

If you don’t have some of these materials, there are plenty of alternatives that may be lying around your house. For example, straws or chopsticks work well for the stems, and any thin paper that can be crumpled without tearing will work in place of the tissue paper.

You could even color a piece of white paper with markers or crayons and create a one-of-a-kind multicolored flower. Additional materials can be used to decorate your flowers, such as washi tape, ribbon, small pom poms, and sequins.2 Before making your flowers, you will need to prepare the tissue paper by cutting all of the sheets to the same size.

How To Make Flower Out Of Paper – Easy!

Then you’ll be able to stack and fold them into petals to make a flower shape. Be sure to follow the measurements listed below. If you cut the paper into squares instead of rectangles, for instance, the flower may end up looking different than you had planned!

  • Take the tissue paper out of its package, stack three sheets on top of one another, line them up, and cut into 12-by-6-inch sheets. (For larger flowers, use bigger sheets and cut to your desired size).
  • Once cut to size, be sure your sheets of tissue paper are stacked and lined up once again before you begin folding your tissue paper.
  • Start with the shorter side (in this case, the 6-inch side) and make a 1-inch fold to start off an accordion fold.

If you are making several of these flowers, lay multiple tissue paper sheets on top of one another at the same time before cutting to size (at least six to 12 sheets is ideal).3 Turn your tissue paper stack so that the short end is in front of you on the table, portrait-style.

  • Once you have made a 1-inch fold in your stacked tissue paper edge, turn your tissue paper stack over for the next fold, then turn it back for the fold after that.
  • Keep folding and turning over the paper until you have an accordion-style narrow strip of tissue paper.

4 In this step, you will ensure that the flower has the desired shape by trimming the ends to look like petals.

  • Take your scissors and trim the ends of the stacked tissue paper strip so that you have a rounded edge. This will help your tissue paper petals have a rounded appearance, like the petals of a real peony, when you unfold the flower later.
  • Be sure to trim both ends of your folded tissue paper stack.

5

  1. To ensure the stem is centered, fold the tissue strip in half and place the green pipe cleaner or chenille stem at the fold.
  2. Loop the “stem” around the middle of the folded tissue paper strip.
  3. Twist the pipe cleaner onto itself to hold the tissue paper strip in place.

If you are using more than one color of tissue paper, you can create variations in the finished flower by changing the position of the pipe cleaner.6 Be careful with this step as you pull the layers apart. Tissue paper is fragile and can rip if it’s not pulled apart gently.

  • Starting on one side, begin opening up the tissue paper folds you made.
  • Be sure to pull apart the folds evenly from both ends.

If your paper does tear a bit when you pull the layers apart, don’t worry. Those rips will most likely not even show, and you may be able to tuck them into the other petals to hide them in the next step.7

Gently separate the tissue paper sheets to unfold the petals of your flower. It will quickly begin to look like a beautiful blossom.

Very young children may have a hard time with this part, so you may want to do this step and then have your child fluff the petals once you are done. But even if it doesn’t look perfect, it will still be pretty, and your child will love showing off their flower.8 This step is optional, although having green leaves lends the blossoms even more of a realistic look.

  • Make a 2-inch fold in a piece of green cardstock or construction paper.
  • Draw leaves on the folded edge. If you used 12-by-6-inch tissue paper for the flower, the leaves should be at least 4 inches long and about an inch at their widest point.
  • Cut out the leaves.
  • Glue one or two leaves to the stem of each blossom, placing them wherever you and your child decide they look best.

9 Once you have made a few tissue paper flowers, you can arrange them in a vase or give them as gifts for, Easter, or any other special (or “just because”) occasion. Children may also enjoy attaching the flowers to a headband, decorating their bedroom curtains or doorframe with them, or making a wreath with a circle of flowers. : Tissue Paper Flowers: Easy, Kid-Friendly DIY Craft

How to make simple flowers with paper?

Tissue Paper Flowers: Easy, Kid-Friendly DIY Craft Tissue paper flowers are an that’s perfect for a variety of holidays and occasions. Kids of all ages can participate in this, School-age kids will particularly love this craft because it allows them to create decor that can be used and admired.

  • 1 green chenille stem/pipe cleaner
  • 1 sheet of green cardstock paper or construction paper
  • 3 sheets (12-by-6-inch sheets or larger) of colored tissue paper
  • Ruler
  • Scissors
  • Glue

If you don’t have some of these materials, there are plenty of alternatives that may be lying around your house. For example, straws or chopsticks work well for the stems, and any thin paper that can be crumpled without tearing will work in place of the tissue paper.

  1. You could even color a piece of white paper with markers or crayons and create a one-of-a-kind multicolored flower.
  2. Additional materials can be used to decorate your flowers, such as washi tape, ribbon, small pom poms, and sequins.2 Before making your flowers, you will need to prepare the tissue paper by cutting all of the sheets to the same size.

Then you’ll be able to stack and fold them into petals to make a flower shape. Be sure to follow the measurements listed below. If you cut the paper into squares instead of rectangles, for instance, the flower may end up looking different than you had planned!

  • Take the tissue paper out of its package, stack three sheets on top of one another, line them up, and cut into 12-by-6-inch sheets. (For larger flowers, use bigger sheets and cut to your desired size).
  • Once cut to size, be sure your sheets of tissue paper are stacked and lined up once again before you begin folding your tissue paper.
  • Start with the shorter side (in this case, the 6-inch side) and make a 1-inch fold to start off an accordion fold.

If you are making several of these flowers, lay multiple tissue paper sheets on top of one another at the same time before cutting to size (at least six to 12 sheets is ideal).3 Turn your tissue paper stack so that the short end is in front of you on the table, portrait-style.

  • Once you have made a 1-inch fold in your stacked tissue paper edge, turn your tissue paper stack over for the next fold, then turn it back for the fold after that.
  • Keep folding and turning over the paper until you have an accordion-style narrow strip of tissue paper.

4 In this step, you will ensure that the flower has the desired shape by trimming the ends to look like petals.

  • Take your scissors and trim the ends of the stacked tissue paper strip so that you have a rounded edge. This will help your tissue paper petals have a rounded appearance, like the petals of a real peony, when you unfold the flower later.
  • Be sure to trim both ends of your folded tissue paper stack.

5

  1. To ensure the stem is centered, fold the tissue strip in half and place the green pipe cleaner or chenille stem at the fold.
  2. Loop the “stem” around the middle of the folded tissue paper strip.
  3. Twist the pipe cleaner onto itself to hold the tissue paper strip in place.

If you are using more than one color of tissue paper, you can create variations in the finished flower by changing the position of the pipe cleaner.6 Be careful with this step as you pull the layers apart. Tissue paper is fragile and can rip if it’s not pulled apart gently.

  • Starting on one side, begin opening up the tissue paper folds you made.
  • Be sure to pull apart the folds evenly from both ends.

If your paper does tear a bit when you pull the layers apart, don’t worry. Those rips will most likely not even show, and you may be able to tuck them into the other petals to hide them in the next step.7

Gently separate the tissue paper sheets to unfold the petals of your flower. It will quickly begin to look like a beautiful blossom.

Very young children may have a hard time with this part, so you may want to do this step and then have your child fluff the petals once you are done. But even if it doesn’t look perfect, it will still be pretty, and your child will love showing off their flower.8 This step is optional, although having green leaves lends the blossoms even more of a realistic look.

  • Make a 2-inch fold in a piece of green cardstock or construction paper.
  • Draw leaves on the folded edge. If you used 12-by-6-inch tissue paper for the flower, the leaves should be at least 4 inches long and about an inch at their widest point.
  • Cut out the leaves.
  • Glue one or two leaves to the stem of each blossom, placing them wherever you and your child decide they look best.

9 Once you have made a few tissue paper flowers, you can arrange them in a vase or give them as gifts for, Easter, or any other special (or “just because”) occasion. Children may also enjoy attaching the flowers to a headband, decorating their bedroom curtains or doorframe with them, or making a wreath with a circle of flowers. : Tissue Paper Flowers: Easy, Kid-Friendly DIY Craft

How do you make small paper flowers?

  • Use thin and easy- to -fold papers.
  • Crepe paper and tissue paper are great for crafting small flowers.
  • Use glue stick for joining parts. If you’re using white glue,then apply a very small amount.
  • Do not use hot glue to craft small flowers.