USA – In case you are wondering, a standard US brick size is 8 inches long x 3 5/8 inches wide x 2 1/4 inches high.
- 1 What is the width of the brick answer?
- 2 What is nominal brick size?
- 3 Are all bricks a standard size?
What is the width of a brick uK?
The brick dimensions stated by the manufacturer are known as the work size. The most widely used work size for uK clay bricks is 215 x 102.5 x 65mm.
How wide is a brick in MM?
With a standard mortar joint of 10 mm, a repeating unit of bricks laid in a stretcher bond will be 225 mm lengthwise and 75 mm in height, If bricks are laid cross-wise, two 102.5 mm depths plus two mortar joints gives the same repeating unit as the length of one brick plus one mortar joint, i.e.225 mm. If they are laid height wise, three 65 mm heights plus three mortar joints gives the same repeating unit as the length of one brick plus one mortar joint, i.e.225 mm.
This makes it straight-forward to create complex patterns of bricks within the standard co-ordinating size, See Types of brick bonding for more information,60 standard bricks laid in a stretcher bond (lengthwise) are required for every square meter of wall, To help develop this list, click ‘Edit this article’ at the top of the page.
|Type||Characteristics||Imperial length x depth x height||Metric length x depth x height|
|Blocks||Constructed using concrete or cement, They may include a hollow core to make them lighter and to improve their insulation,||440 x (varies) x 215|
|Modular||Commonly used for the construction of buildings and homes,||7-5/8″ x 3-5/8″ x 2-1/4″||194 x 92 x 57|
|Jumbo modular||7-5/8″ x 3-5/8″ x 2-3/4″||194 x 92 x 70|
|Queen||Slightly smaller and more cost effective than a modular brick,||9-5/8″ x 3-1/8″ x 2-3/4″||244 x 79 x 70|
|King||9-5/8″ x 2-3/4″ x 2-5/8″||244 x 76 x 67|
|Engineer||Used where strength and water/ frost resistance are required. Very sturdy and reliable to use.||7-5/8″ x 3-5/8″ x 2-13/16″||194 x 92 x 71|
|Closure||Used to finish off a wall, especially at the corners||7-5/8″ x 3-5/8″ x 3-5/8″||194 x 92 x 92|
|Norwegian||Substantial bricks that can be used in loadbearing walls while still looking good, They have a natural beauty to them.||11-5/8″ x 3-5/8″ x 2-13/16″||295 x 92 x 71|
|Monarch||Commonly used for long stretches of wall and are very strong.||15-5/8″ x 3-5/8″ x 3-5/8″||397 x 92 x 92|
|Utility||Very versatile and can be used for a range of construction projects,||11-5/8″ x 3-5/8″ x 3-5/8″||295 x 92 x 92|
|Norman||These are classic industrial bricks for construction projects and commonly come in red or white.||11-5/8″ x 3-5/8″ x 2-1/4″||295 x 92 x 57|
|Roman||11-5/8″ x 3-5/8″ x 1-5/8″||295 x 92 x 41|
|Quad||7-5/8 x 3-5/8″ x 7-5/8″||194 x 92 x 194|
|Danish hand mould||7-5/8″ x 3-5/8″ x 2-1/4″||194 x 92 x 57|
|Meridian||15-5/8″ x 3-5/8″ x 3-5/8″||397 x 92 x 92|
|Ambassador||15-5/8″ x 3-5/8″ x 2-1/4″||397 x 92 x 57|
Note, there may be some variation in these sizes through history and from one supplier to another. Other than the standard rectangular brick, a number of special shapes exist for particular circumstances:
Radial, tapered or arch bricks, Angle and cant bricks that form returns and chamfers. Bullnose bricks with rounded corners. Capping and coping bricks, Cill bricks, Plinth bricks, Slip bricks (thin bricks that can be used for cladding ). Soldier bricks, that form returns for soldier courses.
Bricks can also be cut or hand made to size,
What is the width of the brick answer?
Nepal Standard Brick Dimensions – The standard brick dimension is 240 x 115 x 57 mm (length x depth x height), which is prescribed by the National Building Code (NBC) of Nepal. And other various countries also use the various dimension of bricks. : Brick Size – Standard Brick Dimensions
What are the brick sizes?
What is the size of a standard brick? According to the Brick Industry Association, the most common brick sizes range from 31/2″ x 21/4″ x 7 5/8″ to 3 5/8 x 3 5/8 x 11 5/8″ as measured by Depth x Height x Length. Manufacturers produce bricks to their own specifications but generally fall within these commonly produced sizes.
How wide is a solid brick wall?
A solid brick wall is usually about 22 cm thick, a cavity wall between 27 cm and 30 cm thick, and a solid stone wall could be as much as 50 cm. The age of your home can also be a good indicator.
What is nominal brick size?
For India, a brick of standard size 190 mmx90 mm x 90 mm is recommended by the BIS. With mortar thickness, the size of such a brick becomes200 mm x 100 mm x 100 mmand it is known as the nominal size of the modular brick.
Are all bricks a standard size?
Understanding Brick Dimensions – When discussing brick sizing, three kinds of dimensions may be referenced:
Specified dimensions: The anticipated dimensions of the brick itself, apart from the mortar, are the specified dimensions. These are used in the project specifications, purchase orders, and when working with non-modular bricks. Actual dimensions: As you might expect, the actual dimensions are the dimensions of a brick once it’s manufactured: the actual end product. Nominal dimensions: Nominal dimensions, typically expressed in round numbers (no fractions), are the sum of the specified dimensions and the expected thickness of the mortar.
What is standard brick spacing?
Brick Sizes: 3/8″ Mortar Joint Between Bricks (Most Common) –
|BRICK TYPE||SPECIFIED SIZE D X H X L (INCHES)||NOMINAL SIZE D X H X L (INCHES)||VERTICAL COURSE|
|Standard||3 5/8 x 2 1/4 x 8||Not modular||3 courses = 8″|
|Modular||3 5/8 x 2 1/4 x 7 5/8||4 x 2 2/3 x 8||3 courses = 8″|
|Norman||3 5/8 x 2 1/4 x 11 5/8||4 x 2 2/3 x 12||3 courses = 8″|
|Roman||3 5/8 x 1 5/8 x 11 5/8||4 x 2 x 12||1 course = 2″|
|Jumbo||3 5/8 x 2 3/4 x 8||4 x 3 x 8||1 course = 3″|
|Economy||3 5/8 x 3 5/8 x 7 5/8||4 x 4 x 8||1 course = 4″|
|Engineer||3 5/8 x 2 13/16 x 7 5/8||4 x 3 1/5 x 8||5 courses = 16″|
|King||2 3/4 x 2 5/8 x 9 5/8||Not modular||5 courses = 16″|
|Queen||2 3/4 x 2 3/4 x 7 5/8||Not modular||5 courses = 16″|
|Utility||3 5/8 x 3 5/8 x 11 5/8||4 x 4 x 12||1 course = 4″|
How thick is a brick house wall?
However, the overall thickness of cavity or masonry-bonded hollow walls shall not be less than 8 inches (203 mm), including cavity.2109.4 Thickness of Masonry.
|HEIGHT OF WALLS||THICKNESS|
|8 ft. and under||2 in.|
|Over 8 ft. to 12 ft||3 in.|
|Over 12 ft. to 16 ft||4 in.|
|Over 16 ft. to 20 ft||6 in.|
How thick is a 2 brick wall?
Thickness of Walls – How to Be a Mason | Sikana
In this video you will learn how to identify the Thickness of walls.Brick walls may be built with varying thicknesses no matter what bonds are used to build them.The thickness of a wall is chosen keeping in mind a few important factors.Depending on the dampness and temperature of the location, the thickness of walls can help provide adequate insulation to a structure.The load-bearing requirements of a building must also be considered when planning the thickness of walls.Last, but not least, the budget of the project will have the primary say in the thickness of the wall, as the mason can only build using the materials they have available to them.The thickness of a wall is noted by how it correlates to the length of a single brick.A Half Brick Wall has a thickness equal to a brick split halfway along its length.A Full Brick Wall has a thickness equal to the length of a single full brick.A One-and-a-Half Brick Wall has a thickness equal to the combined length of a full and a half brick.A Two-Brick Wall has a thickness equal to the combined length of two bricks.The majority of brick walls are built between one and three bricks’ thickness.You have now learned to identify the Thickness of walls.
: Thickness of Walls – How to Be a Mason | Sikana
When did bricks change size?
The following is a great piece of work and research – source. Part of the interest of brickwork is the ability to observe subtle (and some not so subtle) differences in size as you walk around different towns. When you ‘get your eye in’ you will find that different-sized bricks, and especially bricks where the sides are in a different ratio, stand out and catch your eye, even before you resort to a ruler.
- Several things influenced the size of bricks.
- They mustn’t be too big, or they will be too heavy and awkward to pick up with one hand while applying mortar with a trowel held in the other.
- They mustn’t be too small, or a wall will need more of them, and more mortar and more time to lay it.
- In modern times most bricks in the UK are made to a standard size of 65 x 102.5 x 215mm and laid with nominal 10mm mortar joints, but in former times the size varied quite a lot.
Some early medieval bricks were as big as 13″ x 6″x 2″. Late 15th century bricks were mostly about 9½” x 4½” x 2″. A charter in 1571 specified 9″ x 4½” x 2¼”, and in the 18th century, Parliament specified 8½” x 4″ x 2½”, which is equivalent to the modern metric brick of 215mm x 102.5mm x 65mm.
- What upset the apple cart was a brick tax imposed by the government in 1784.
- The tax was paid per brick, so brick makers responded by making much larger bricks, which meant fewer were needed for a given size wall.
- An extreme case was Joseph Wilkes of Measham, who produced bricks double the normal size (110 x 110 x 235mm) known locally as ‘Jumbies’ or Wilkes’s Gobbs”, see right.
The government later set an upper limit of 150 cubic inches (10″ x 5″ x 3″) for a ‘brick, which was still much larger than bricks had been before the tax. The tax was repealed in 1850, but by this time, many brick makers, especially in the Midlands and North, had moved from hand-made to machine-made bricks.
- Having invested heavily in machinery it wasn’t easy for them to revert to the smaller sizes, which meant that big bricks persisted for a long time afterwards.
- As a result, you are likely to find bigger bricks as you move farther north, in buildings built before the introduction of standard modern bricks.
******************* Brick sizes have changed significantly across different time periods in the UK, with imperial brick sizes used until recently (imperial brick size is 228 x 110 x 68+ mm). The metric system was adopted in 1965 (metric brick size is 215 x 102.5 x 65mm) and is now the standard.
- While metric bricks can be incorporated into an existing imperial masonry structure by increasing the mortar joint bed, it is always best to source the original brick size to ensure consistency and a better visual finish.
- The Scottish Employers’ Council for the Clay Industries – One useful initiative was the standardisation of brick sizes, at the surprisingly high number of 108.
The common size is 9 x 4 ½ x 3 inches. However, each length of 9′ requires a breadth of 4 ½”, 6′ and 9′. Lengths based on 12′, 13 ½”, 15′, and 18′ require similar breadths. All these lengths and breadths require side arch and end arch tapers varying by 1/8′.
- Finally, the thickness can vary from 3′, 2 ½’, 2′, 1 ½’, and ½’.
- If you add up all these sizes and leave out a few because they are not too much in demand you will come to over a hundred sizes.
- It was still a big improvement on the previous practice.
- The names of such a series of sizes vary in different parts of the country, but in Scotland, they include squares, scones, pups, whelps, soaps, bullnoses, feathers, and cupolas amongst others.
****************** Below – 1625 – King Charles sets a size for bricks in London and a price. 18/12/1856 – North British Daily Mail – An article on the issues surrounding irregular brick sizes.30/12/1941 – The Scotsman – Builders and bricks – Liberton, Edinburgh, December 29, 1941. Sir, – Referring to the recent letter by “Brickmaker, I feel I must make some further reference to the increased cost in building that will result from the introduction of the 2 7/8 inch brick to Scotland.
From the builder’s point of view and experience of brick building, the lower the brick the more expensive it is to build, as extra labour, bricks, and mortar are required to produce the same area procured by the higher brick. If the 2 7/8 inch brick were adopted as “standard, ” the bricklayer would have to lay at least 10 per cent, more bricks per day, and in so doing, he would use approximately 6 per cent, more mortar to produce the equivalent yardage of 3 1/4 inch bricks, as it is yardage that counts at the end of the day and not the number of bricks laid.
“Brickmaker” also ignores the fact that the Government have “two” standard sizes of bricks in England, 2 5/8 inch South of Birmingham, and 2 7/8 inch bricks in the North, thus defeating any plan for universal standardisation. Assuming that the brickworks can produce the additional 48 million 2 7/8 inch bricks necessary, to equal the existing annual square yardage built with 3 1/4 inch bricks, this extra quantity may become an additional cost, as it remains to be seen whether the brickworks will produce the smaller brick at a reduced rate, or charge the same, as for 3 1/4 inch bricks.
- The reference to women’s labour is rather surprising, as, to the knowledge of the building trade, women and youth labour have always been employed in the production of bricks.
- Brick builders are quite agreed on standardisation, but only where it is economical and they are quite convinced that bricks of 2 7/8 inch will greatly increase the cost as well as retard the progress of wartime work.
I am &c J.B. Alexander, Jun, President, Edinburgh and District Master Builders Association.06/04/2000 – Architects Journal – Masonry materials – Of all the masonry materials, stone masonry tells us the least about its construction age. The bond of the stones can broadly distinguish between medieval (rubble-cored), post-medieval (brick-backed), and twentieth-century (steel-framed), although any age of construction could be solidly bonded.
Unlike stone, brickwork gives many clues to its age. After use by the Romans, clay bricks were re-introduced into the UK in the 1400s, initially in the south and east, near to locations where suitable clay could be dug out and burnt in wooden clamps. With the decline of medieval timber-framed buildings and the advent of canals, railways, and better roads, bricks were transported and used throughout the country.
By the eighteenth century, brick was the most common material for houses, and many old timber-framed houses were gentrified by re-facing with bricks or mathematical tiles, particularly the latter after the first brick tax of 1784. Since the 1400s the width of a brick has always been about 4.5 inches (114mm) – governed by the need to grasp and lay it with one hand.
But the length and thickness of a brick, has not always been as constant as today, being influenced by government legislation, regional variations in firing thicknesses of clay, bonding, joint thickness, and local practice. Medieval bricks were longer and thinner than modern bricks – as at Herstmonceux Castle, East Sussex.
circa 1440 which has 2 inch (51mm) thick bricks. But beware modern imitations, particularly amongst Edwardian buildings. Parliament fixed brick sizes in 1776 at 8.5 x 4 x 2.5 inches (216 x 102 x 63mm). Fighting wars is expensive. In 1784, after the American War of Independence, parliament taxed each brick used, so some bricks were made larger, up to 10 x 5 x 3ins (254 x 127 x 76mm)2.
In 1803, these large bricks were further taxed, and this was avoided by reducing the size to 9 x 4.5 x 3ins (229 x 114 x 76mm). In 1850 the brick taxes were repealed, and brick sizes gradually standardised, rising four courses per foot (304mm), except in the north of England where they rose four courses per 13 inches (330mm) for much of the nineteenth century.
In 1851, machinery was designed for making pressed bricks in volume, eventually replacing handmade bricks, except for best quality work. Machine-made bricks, such as Flettons which were first made in the 1870s, are generally smoother and more regular in appearance than handmade bricks.
- At the end of the First World War, the Local Government Board highlighted the need to supplement traditional construction with non-traditional types.
- Amongst other materials and components, concrete bricks and sand-lime bricks were introduced, which like machine-made clay bricks, are smooth and regular, but with a more uniform texture.
Bricks were traditionally laid in a lime mortar until Portland cement became more popular in the late nineteenth century, thanks to its cheapness, faster set, and safer handling properties. Lime mortar is usually more friable than cement mortar, although laboratory analysis is the only sure way of distinguishing between them.
To improve the strength of Georgian and Victorian lime-mortar brickwork bonding, timbers were usually set in their inner faces or occasionally in the core of the walls – such as in Tittenhurst Park, Berkshire around 1800. Better quality Victorian buildings had hoop iron laid in the bed joints instead – as at Marlborough House Mews, London from around 1862 and the now-demolished Stonebridge Park Power Station, London of 1906.
In early brick buildings, the bond is often irregular, but English Bond became the norm by the end of the sixteenth century. Flemish Bond was introduced in the seventeenth century and had largely replaced English Bond by the early eighteenth. In the latter half of the Georgian era, snapped-header brickwork was frequently used in cheap, speculative construction.
Although apparently solidly bonded, many cheap Georgian external walls only had first-quality bricks in the external face. Headers in the outer face were mostly snapped- off where they met the inner face due to misalignments in the coursing of the two faces. This may have been the unwitting precursor of cavity (two-leaf) brickwork, or perhaps that was the nineteenth-century cheap walling, Rat Trap Bond, where bricks were laid on edge to reduce consumption leaving cavities within – as at Coleshill Model Farm, near Swindon around 1854.
The earliest known true cavity wall is around 1804, recorded by bre ip16/88, although most early examples are found in late Victorian buildings, not signalled by the customary Stretcher Bond, but usually by Flemish Bond with false headers. Some early cavity walls have no ties between the leaves.
Where used, ties varied from cast or wrought iron bars to extra-long hollow glazed header bricks. By the 1920s, Stretcher Bond brickwork and mild steel cavity ties had become the norm. For better durability, ties gradually evolved after World War II through galvanised mild steel to stainless steel, and even to copper, bronze, and plastic in a few cases.
After 1945 the brick inner leaf of cavity walls was replaced by dense concrete blocks, and then in the mid-1970s, the ‘energy crisis’ arising from the 1973 Middle East War accelerated the change to insulative lightweight concrete blocks. Some cavity walls have bed-joint reinforcement, such as Expamet, Bricktor, or stainless steel wire, the modern equivalents of Victorian hoop-iron, and lime mortar is making a comeback thanks to its greater tolerance of structural movement than cement mortar, and modern safer ways of handling the lime.
Masonry pointing is readily renewable, and therefore it is an unreliable indicator of age, although Georgian tuck-pointing and post-war recessed pointing are seldom aped.2018 – Nowadays most bricks in the UK are made to a standard brick size of 215mm long, 102.5mm wide and 65mm high (215×102.5x65mm) and laid with a nominal 10mm mortar joint.
However, there is a growing trend towards more non-standard brick dimensions. Longer, thinner formats are very much in vogue at the moment with brick heights below 50mm and brick lengths of more than 500mm not uncommon. These brick sizes are being used by architects and designers to create some very impressive, modern styles of buildings.2018 – Imperial handmade bricks, Grindle, Shropshire – • Before 1965 and the introduction of the standard metric sized brick, all bricks produced in the UK were created using imperial measurements.
- That’s why using imperial bricks for the restoration or extension of properties built before this time is vital.
- The regional variation of bricks was originally created due to a lack of transport links – local clays were used for brick production which dictated the colours used.
- Those regional colours are now often a conservation requirement.
• After the Great Fire of London in 1666, an Act of Parliament was introduced to stipulate more durable building materials for house construction, which led to an increase in brick production. • The first bricks produced were a lot smaller and slimmer in size.
- When the brick tax was introduced in 1784, manufacturers increased their brick sizes to compensate.
- Handmade bricks stand the test of time, with many 15th and 16th century buildings still around today.
- The open-pore structure of handmade bricks is naturally durable, allowing water to enter and escape without damaging the face or structural integrity of the bricks.
The use of lime mortars is also a major factor contributing to the longevity of brickwork, allowing buildings to flex and move and its natural self-healing properties enabling any movement cracks within the mortar to repair themselves.2016 – Various countries have various standard brick size and dimensions, however, brick can be made in multiple shapes and sizes, depending on its application. If bricks are large, it is difficult to burn them properly and they become too heavy to be placed with a single hand.
On the other hand, if bricks are small, more quantity of mortar is required. Hence, a standard dimension is determined for various brickworks. The actual size (or the specified size), is the real dimension of the brick. The nominal size is the actual size plus the width of the mortar joint. Most bricks are manufactured in such a way that the nominal sizes fit into a grid of 4 inches, which complies with the modules of other building materials such as doors, windows, and wood components.
Standard Brick Size in England – “In England, the length and width of the common brick has remained fairly constant over the centuries but the depth has varied from about two inches (about 51 mm) or smaller in earlier times to about two and a half inches (about 64 mm) more recently.
In the United Kingdom, the usual size of a modern brick is 215 × 102.5 × 65 mm (about 8 5 ⁄ 8 × 4 1 ⁄ 8 × 2 5 ⁄ 8 inches), which, with a nominal 10 mm ( 3 ⁄ 8 inch) mortar joint, forms a unit size of 225 × 112.5 × 75 mm (9 × 4 1 ⁄ 2 × 3 inches), for a ratio of 6:3:2.” – Wikipedia Standard Brick Size in the United States – “In the United States, modern standard bricks are (controlled by American Society for Testing and Materials i.e.
ASTM) about 8 × 3 5 ⁄ 8 × 2 1 ⁄ 4 inches (203 × 92 × 57 mm). The more commonly used is the modular brick 7 5 ⁄ 8 × 3 5 ⁄ 8 × 2 1 ⁄ 4 inches (194 × 92 × 57 mm). This modular brick of 7 5 ⁄ 8 with a 3 ⁄ 8 mortar joint eases the calculation of the number of bricks in a given run.” – Wikipedia Standard Brick Size in Australia – According to Boral Company in Australia, the standard brick size (or the working size) is 76mm high, 230mm long and 110mm wide as per the Australian Standard AS4455.
- Some bricks are made with different work sizes.50 mm and 90 mm high bricks, 90 mm wide bricks and 290 mm long bricks are used for different structural and aesthetic effects.
- Larger bricks are often used for more economical laying and as a design feature either on their own or combined with smaller bricks.
In cyclonic areas larger (140 mm wide x 90 mm high x 290 mm long) hollow bricks are used to allow reinforcement and grouting in the wall. Wider (150 mm wide) bricks can also be used in walls requiring lower sound transmission, higher fire resistance levels and higher load-bearing capacity depending on the specific brick properties.
- Standard & Nominal Brick size in India – In India, the standard brick size is 190 mm x 90 mm x 90 mm as per the recommendation of BIS.
- With mortar thickness, the dimension of the brick becomes 200 mm x 100 mm x 100 mm which is also known as the nominal size of the modular brick.
- Standard Brick Size in Nepal – According to National Building Code (NBC 205: 1994) of Nepal, the bricks shall be of a standard rectangular shape, burnt red, hand-formed or machine-made, and of crushing strength not less than 3.5 N/mm².
The higher the density and the strength, the better they will be. The standard brick size of 240 x 115 x 57 mm with 10 mm thick horizontal and vertical mortar joints is preferable. Tolerances of -10 mm in length, -5 mm in the width and ±3 mm in thickness shall be acceptable for the purpose of thick walls in this Mandatory Rules of Thumb (MRT).
Note: The main objective of these Mandatory Rules of Thumb (MRT) in the National Building Code of Nepal is to provide ready-to-use dimensions and details for various structural and non-structural elements for up to three-storey reinforced concrete (RC), framed, ordinary residential buildings commonly being built by owner-builders in Nepal.
Face brick dimensions : Face bricks are the bricks used on exterior surfaces of a structure or houses. In the table below, we have given the standard dimensions of face brick on various countries listed in alphabetical order (both in imperial and metric units).
|Standard||Imperial (in)||Metric (mm)|
|Australia||9 × 4⅓ × 3||230 × 110 × 76|
|Denmark||9 × 4¼ × 2¼||228 × 108 × 54|
|Germany||9 × 4¼ × 2¾||240 × 115 × 71|
|India||9 × 4¼ × 2¾||228 × 107 × 69|
|Romania||9 × 4¼ × 2½||240 × 115 × 63|
|Russia||10 × 4¾ × 2½||250 × 120 × 65|
|South Africa||8¾ × 4 × 3||222 × 106 × 73|
|Sweden||10 × 4¾ × 2½||250 × 120 × 62|
|United Kingdom||8½ × 4 × 2½||215 × 102.5 × 65|
|United States||7⅝ × 3⅝ × 2¼||194 × 92 × 57|
A must-read is an article on brick sizes by Martin Hammond in his booklet entitled Bricks and Brickmaking. ‘ Happy DIY Home ‘ – A comprehensive online article on brick sizes.
How thick is a UK brick wall?
Safe heights for walls of different thicknesses –
|Zone 1 *wall thickness||Zone 1 max. height||Zone 2 *wall thickness||Zone 2 max. height||Zone 3 *wall thickness||Zone 3 max height||Zone 4 *wall thickness||Zone 4 max. height|
|½ Brick||525mm||½ Brick||450mm||½ Brick||400mm||½ Brick||375mm|
|1 Brick||1450mm||1 Brick||1300mm||1 Brick||1175mm||1 Brick||1075mm|
|1½ Brick||2400mm||1½ Brick||2175mm||1½ Brick||2000mm||1½ Brick||1825mm|
|100mm Block||450mm||100mm Block||400mm||100mm Block||350mm||100mm Block||325mm|
|200mm Block||1050mm||200mm Block||925mm||200mm Block||850mm||200mm Block||775mm|
|300mm Block||2000mm||300mm Block||1825mm||300mm Block||1650mm||300mm Block||1525mm|
½ Brick = 100mm; 1 Brick = 215mm; 1½ Brick = 325mm This leaflet is based on the guidance given in Good Building Guides 13 and 14 available from the BRE bookshop,