Step 3 – Apply the Paint Primer – When you get the primer from the store, ask them to shake it up thoroughly for you. If it has been sitting unused for a while before you begin your project, stir the paint primer from the bottom of the can to reintegrate any chemical separation. Pour some of the primer into a paint tray.

1. Use a paintbrush to apply the primer around the edges of the wall to be painted.
2. Brush away from the painter’s tape to keep the primer from getting underneath the masking tape.
3. Once the primer is applied around the edges you can switch to the paint roller.
4. Remove the excess paint primer and begin to cover the rest of the wall.

Make sure to overlap what you just did with the paintbrush and in each rolled-on section. When applying the primer, make sure that you cover the entire area without making the layers too thick. Also, ensure proper dry time before painting over the primer so that it has time to properly cure to the wall and is ready to accept the layer of paint.

Can you paint concrete with primer?

How to Apply Primer on Concrete – Painting a concrete surface is significantly more involved than painting a wall. Concrete has to be specially prepped for paint, or the paint simply won’t adhere as it should. Here’s the right way to do it: Strip Old Paint: If the concrete surface was painted previously, it is important to remove any paint that is peeling or flaking.

For an indoor concrete surface, use tools like a paint scraper or wire brush to remove paint. For outdoor surfaces, a power washer will quickly remove old paint, as well as dirt and weeds. Clean the Concrete Surface: Concrete is a unique material because it is very absorptive—it easily traps dirt, grease, and oil.

For a clean and even coat of paint, your concrete surface will need to be thoroughly cleaned before primer is applied. There are several cleaners on the market created specifically for concrete cleaning. Trisodium phosphate will remove grease and oil, and Krud Kutter has a few different types of more earth-friendly concrete cleaner options.

Seal Interior Concrete: Concrete that is located inside of a home has to be sealed. This is because concrete is a highly absorptive surface and without a seal, moisture can seep inside through concrete. Use a strong sealer to fix any cracks and seal the interior surface of the concrete completely. Apply Primer: Once you’ve properly prepared the surface of the concrete, you can apply primer according to instructions.

Concrete primer is specifically designed to absorb into the surface of concrete, filling imperfections and creating a smooth surface for the paint. Most primers will dry in a few hours, but home improvement professionals suggest waiting a full eight hours after priming before applying paint just to be sure.

• Once a concrete surface has been cleaned, sealed, and primed, it is ready for paint.
• There are specific paint products called masonry paint, that are created for painting concrete.
• You will also need to invest in brushes designed for this type of product, which can be found at most hardware stores.
• While priming a concrete surface seems like one more unnecessary step, it is actually a crucial part of your concrete painting project.

Without the appropriate primer, you can expect a poor finish to your project, as well as peeling and cracking of the paint over time. Following these steps, however, will reward you with a thoroughly beautiful paint job that will withstand weather changes and years of wear and tear.

How do you prepare a wall before applying primer?

How to Apply Paint Primer

To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience. Reviewed by on Oct 16, 2019

• Drop cloth
• Paint roller
• Paint tray
• Painters tape
• Oil-free soap
• Warm water
• Sponge
• Lint-free towel
• Sandpaper
• Sander
• Spackle
• Trowel
• Hammer
• Screwdriver
• Drywall tape
• Primer
• Paintbrush
• Eye protection

1. Drop cloth
2. Paint roller
3. Paint tray
4. Painters tape
5. Oil-free soap
6. Warm water
7. Sponge
8. Lint-free towel
9. Sandpaper
10. Sander
11. Spackle
12. Trowel
13. Hammer
14. Screwdriver
15. Drywall tape
16. Primer
17. Paintbrush
18. Eye protection

Applying will help to create a better finish for the topcoat and keep your paint job looking fresh longer. The paint primer allows for the true color of the paint used for the topcoat to come through. Many people think that using a paint primer is time-consuming or that it is not really needed, but if you want the best look possible then a paint primer is a must.

Applying a paint primer isn’t difficult. The proper technique is important to get the results you want. The following article will show you how to properly apply the paint primer to your walls. As with any painting project, you will want to protect the surrounding area. Move furniture out of the room or place it away from walls and cover it with a thick drop cloth or tarp.

Also, protect your floor. Before you can apply paint primer to the wall, it needs to be cleaned. Any kind of residue left on the wall can cause the not to adhere correctly. Carefully examine the wall and use the hammer to pound in extruding nails to just below the surface of the wall or pull them out completely.

What kind of primer do you use on concrete floors?

Acrylic/Latex: Because concrete is porous, a water-based or acrylic primer is more likely to soak into the concrete than an oil-based primer, bonding to the substrate and allowing the paint to grip the surface. These primers will also reduce the dust on interior concrete.

How do you paint around the edges of a wall?

Step 3 – Apply the Paint Primer – When you get the primer from the store, ask them to shake it up thoroughly for you. If it has been sitting unused for a while before you begin your project, stir the paint primer from the bottom of the can to reintegrate any chemical separation. Pour some of the primer into a paint tray.

• Use a paintbrush to apply the primer around the edges of the wall to be painted.
• Brush away from the painter’s tape to keep the primer from getting underneath the masking tape.
• Once the primer is applied around the edges you can switch to the paint roller.
• Remove the excess paint primer and begin to cover the rest of the wall.

Make sure to overlap what you just did with the paintbrush and in each rolled-on section. When applying the primer, make sure that you cover the entire area without making the layers too thick. Also, ensure proper dry time before painting over the primer so that it has time to properly cure to the wall and is ready to accept the layer of paint.