What Is Soft Brick And Boot Loop?

What Is Soft Brick And Boot Loop
How Is Your Phone Bricked? – What Is Soft Brick And Boot Loop The steps for how to unbrick a phone depend on how it’s bricked in the first place. There are two categories of bricked phones:

  • The soft brick. The phone freezes on the Android boot screen, gets stuck in a boot loop, or just goes straight to recovery. So long as something happens when you press the power button, it’s soft bricked. The good news is these are pretty easy to fix.
  • The hard brick. You push the power button, and nothing happens. Hard bricks can be caused by issues like attempting to flash an incompatible ROM or kernel, and there’s normally no software solution for them. Hard bricks are terrible news, but fortunately, they’re quite rare.

Most likely, you’re soft bricked, and you’ll see something like the image above. While the differences in how various devices work make it hard to come up with a catch-all solution to unbrick Android, there are four common tricks you can try to get yourself back on track:

  • Wipe the data, then re-flash a custom ROM
  • Disable Xposed mods through recovery
  • Restore a Nandroid backup
  • Flash a factory image

Before you get started, make sure your phone and computer are set up and ready with the proper tools.

How do I fix soft bricked Android?

Part 3: Booting straight into recovery mode – If your bricked phone does not boot up to your Home Screen or Lock screen and instead boots directly into Recovery Mode, there is not much left to do. Booting straight into recovery mode is undoubtedly a soft brick error but it also indicates a possible problem with your current ROM.

The only option you have to flash a new ROM to reboot your bricked phone back to its normal functioning. To flash a new ROM: Firstly, you must root your phone and unlock the Bootloader. Every phone’s mechanism to unlock the bootloader is different, thus, we suggest to refer to your user manual. Once the Bootloader is unlocked, take a backup of all your data by selecting “Backup” or “Android” back in recovery mode.

The process should not take long and all you need to do is tap “OK” to config backup. What Is Soft Brick And Boot Loop In this step, download a ROM of your choice and store it in your SD Card. Insert the SD Card in your phone to begin the flashing process. Once at the recovery mode, select “Install Zip from SD Card” from the options. What Is Soft Brick And Boot Loop Scroll down using the volume key and use the power key to select the downloaded ROM. What Is Soft Brick And Boot Loop What Is Soft Brick And Boot Loop This might take a few minutes of your time, but once the process is complete, reboot your phone. Hopefully, your bricked phone will not boot normally and work smoothly.

What is soft brick and hard brick?

You don’t need to get panicked if your phone gets soft-bricked. All you have to do is to flash a new and clean version of OS into your phone and it will be normal as before. Hard brick means your device is unbootable without a bootloop. A hard brick device will not show any sign of life into the device.

What does it mean when a phone is bricked?

What is Bricking? – Definition from Techopedia Bricking refers to a consumer electronic device that has been damaged beyond repair, making it utterly unusable, often because of damaged firmware. The use of the term stems from the brick-like shape of many consumer gadgets, and the fact that once they are rendered inoperative, they are virtually useless except as a paperweight or a doorstop.

  • Strictly speaking, a device is bricked when it completely loses its functionality.
  • However, the term is being used with more flexibility these days, and in some cases, bricked electronics are still recoverable with some hardware replacement or additional software.
  • Bricking can occur for any number of reasons.

A thwarted attempt to update a device is one of these. Firmware updating for some gadgets is a process that must be successfully completed without interruption. As such, a power outage, user intervention or any other form of interruption that makes the update process stop, albeit inadvertently, may cause the existing firmware to be overwritten, rendering it useless.

  1. Bricked equipment is also the unwelcome consequence of malicious or incorrect software, such as when firmware intended for a different hardware version of the device is installed.
  2. In some cases, a consumer electronics company may intentionally create corrupt software that can brick a device as a way of penalizing users who unlock their gadgets to avoid the limitations the company imposed through its official firmware.

For instance, Apple was reported to have been deliberately bricking jailbroken iPhones via software updates – a claim that the company has since denied. In the hands of experts, a bricked piece of equipment still has the potential to become “unbricked,” with the use of complex software and hardware solutions. : What is Bricking? – Definition from Techopedia

Can you recover data from a bricked phone?

Part 1: Bricked Android Phone: What does this term actually mean? – A bricked condition of a phone is a phone that fails to boot properly. In simple words, if a phone doesn’t turn on, it is considered to be bricked. Technically, a phone gets bricked when the main software of the phone, which tells the hardware to do things, gets corrupted.

  1. Soft brick
  2. Hard brick

Soft brick: This is a bricking condition where the power of your phone turns on but doesn’t enable it to perform any other functionalities. A soft-bricked phone may:

  • Boot into recovery mode
  • Freeze at the boot screen
  • Get stuck at boot loop

Hard brick: This is the bricking condition where your phone completely turns into a brick. That is, it will not turn on in any way. There are no actual ways to fix or recover data from a hard-bricked Android phone. Hard bricking occurs very rarely and most of the time when your Android phone bricks, it’s going to be soft bricking.

Can soft bricked phone Be Fixed?

Recover Data From a Nandroid Backup – A Nandroid backup can also save the day if you had to wipe your data and didn’t back it up in an easily restorable form. It’s possible to extract specific parts of a Nandroid, so you can restore your apps and data without needing to restore the operating system as well. Here are the instructions for this:

  1. Boot into Android and install Titanium Backup from the Play Store. While this app hasn’t been updated for a while, it’s still one of the best options for this task.
  2. Tap the menu button and navigate to Special Backup/Restore > Extract from Nandroid Backup,
  3. Select your backup from the list.
  4. Choose whether to restore apps, data, or both, and select them (or hit Select All ).
  5. Tap the green tick icon to start the restore process.

What Is Soft Brick And Boot Loop

How do you remove soft bricks?

How to Unbrick an Android Phone or Tablet – Not everything on this list will work for everyone, but there is likely something here that will unbrick your Android device. Try each of these steps until your device is back in working order:

  1. Remove and reinsert the battery, If possible, take out the battery and put it back in place securely. Also, plug in your device’s charger to make sure that a faulty battery isn’t what’s preventing it from turning on.
  2. Contact the manufacturer, If your device is under warranty, the manufacturer might fix or replace your device free of charge. If you have rooted your Android device to install custom firmware or sideload apps, then your warranty is likely void, so you’ll have to fix any problems on your own.
  3. Contact your phone carrier, If your phone is bricked, contact your service provider, They may be able to restore your phone and even recover your data in the store.
  4. Take it to a phone repair shop, If your device is physically damaged and you have no warranty, your best bet is to take your device to professional phone repair shop. They have access to tools and parts that you probably don’t, so paying them to fix it may be the more economical option.
  5. Store it in a bag of rice, If your device isn’t working because of water damage, keep it in a plastic bag filled with uncooked rice overnight. The rice will absorb some of the water, thus improving your chances of resuscitating the device. If your phone is physically damaged, remove the SIM card so that you can recover your contacts.
  6. Replace the screen, If your device turns on, yet the screen remains black, then your device might not be bricked. Instead, the display could be the problem. Take it to a repair shop or replace the screen yourself.
  7. Perform a hard reboot, If your device turns on and then immediately freezes up, try a hard reboot, This is usually accomplished by holding Power + Home, but it differs by device.
  8. Reboot in recovery mode, Try rebooting your device in recovery mode :
    1. With your device turned off, press Volume Up + Power to boot in recovery mode.
    2. Use the volume buttons to navigate the menu and highlight Reboot system now,
    3. Press Power to select the highlighted option.
    4. Wait to see if your device reboots as normal.

    Steps for booting to recovery mode may be different depending on your device’s model. Consult your phone or tablet’s manual for further guidance.

  9. Wipe the cache, Deleting temporary files can sometimes do the trick.
    1. Boot your device in recovery mode.
    2. Select Wipe Cache Partition,
    3. Select Reboot system now,
  10. Restore your Android device to factory settings, If you’ve made modifications to your device that resulted in a soft brick, a factory reset can reverse those changes. Performing a factory reset on your Android device will restore the system to the state it was in when you purchased it. Consequently, you will lose everything you have downloaded and installed. To factory reset a soft bricked Android device:
    1. Boot your device in recovery mode.
    2. Select Wipe Data / Factory Reset,
    3. Select Yes to reset the device and wait. When the process is finished, you’ll return to the recovery mode main menu.
    4. Select Reboot system now,

    If successful, Android will boot up as normal, and you will have to set up your device.

  11. Reinstall the factory version of your OS, If your device has an SD card slot, you can reinstall your device’s OS. This method will also erase all of your personal files.
    1. Search the web for a ROM file of the factory firmware for your device. A good place to begin is the XDA developers forum, In the search bar, enter your device name + stock rom,
    2. Download the appropriate ROM (typically contained in a ZIP file) to an SD card.
    3. Insert the SD card into your device.
    4. Boot your Android device in recovery mode.
    5. Select Install updates from sd card,
    6. Select the ZIP file containing the ROM.
    7. Select Reboot system now,

    Flashing an incompatible ROM can hard brick your device. Make sure to download the correct firmware for your model.

  12. Use an Android unbricking tool, If you’re not comfortable using Odin, there are more user-friendly tools for unbricking specific devices. For example, the Fone Lab Android Data Recovery program is a versatile unbricking tool used to recover Samsung phones and tablets. It is available for both Windows and Mac.

What is soft brick used for?

Note: the number of the brick : ie 20, 23, 26, 28 indicates the service temperature: ie 20 = 2000, 23 =2300 etc Soft bricks are high temperature fire bricks. Soft bricks are IFB : insulating fire brick. They are used in gas and electric kilns as well as gas forges and heat-treating ovens.

Bricks carry a $0.75 per brick double box safe packing fee when going UPS.There is a $5.00 minimum on this packing fee.ie.1-6 bricks carry a flat $5.00 packing fee. Add $0.75 per brick for 7+ bricks.NOTE: This does not apply to large quantities of bricks which ship palletized via our truck or common carrier. Call to special order any firebrick sizes not shown. Discounts are available when ordering 500 or more fire bricks.

What causes Bootloop?

Boot Loop Causes –

The core problem found in a boot loop is a miscommunication that prevents the Android operating system from completing its launch. This can be caused by corrupt app files, faulty installs, viruses, malware and broken system files. If you’ve recently attempted to unlock your phone, or have downloaded a new application and ended up in a boot loop, chances are changes you made to the system caused the problem. Most issues can be resolved with a factory reset, but be aware that tinkering with your phone’s system files always comes with the risk of rendering the device unusable.

What is soft brick made of?

Soft brick made of refractory ceramic materials. Good insulator that can withstand up to 3000 degrees F. Light weight and easily cut with hand tools.

What Is Soft Brick And Boot Loop The Insulating Fire Brick (IFB) is a type of soft brick made of refractory ceramic material, a blend of alumina and silica, that can withstand extremely high temperature applications and has a low thermal conductivity. This IFB is an excellent insulator and reflects heat well.

How do I know if my system is bricked?

Hard brick – Hard bricked devices generally show few or no signs of life. A hard bricked device does not power on or show any vendor logo; the screen remains turned off or blank. Some of the major reasons for hard bricking include installing firmware not intended for the device, severe physical damage, interrupting a firmware flashing procedure, or following a flashing procedure incorrectly.

  1. In the case of Android devices, some kernel bugs have been known that affect the /data partition in the eMMC chip, which becomes corrupted during certain operations such as wiping and flashing.
  2. Recovering from a hard brick is generally considered difficult and requires the use of a more direct programming interface to the device; such an interface often exists, as there must be a way to program the initial firmware during the manufacturing process.

However, additional tools or connections may be needed, such as low-level programming devices. Hardware hard brick recoveries are also considered difficult and require electrical knowledge to find and fix hardware issues. For example, an overloaded capacitor in a circuit may explode, thus stopping the flow of electricity and bricking the device.

Can a bricked phone be Unbrick?

Have you bricked your Apple iPhone or iPad? Here’s how you can bring your iDevice back to life using a Mac or a Windows computer. What Is Soft Brick And Boot Loop It’s easy to install the iOS beta on your iPhone, The process is pretty much the same on an iPad, too. However, sometimes the installation process leaves you with a bricked iPhone/iPad. The good news is that – as long as there’s no hardware damage – it’s relatively simple to restore a bricked iPhone.

How do you know if your phone is corrupted?

How to Delete Corrupted Android OS Files If your Android-powered smartphone begins to exhibit strange behavior, your device may have some corrupted operating system files. Symptoms of corrupted Android OS files may include apps that fail to run properly or functions that cease to work.

Is it possible to Unbrick a device?

Method 4. Restoring a Nandroid Backup – This method can help you fix a soft brick if you want to remove a system mod or replace a system file you modified. The Nandroid backup is basically a snapshot of the phone’s apps, data, and operating system. So, if you can access the device’s recovery mode you will be able to unbrick your phone using a nandroid backup.

  1. Step 1: Enter your device’s Recovery Mode and locate the Restore option.
  2. Step 2: Choose the backup from the internal storage and wait until it is restored.
  3. Step 3: Once the process is completed you should restart your phone to check if it is still bricked.
  4. Eep in mind that restoring a nandroid backup is going to take time and that this process cannot run in the background.

What’s more, you can use the nandroid backup to restore the operating system, apps, or data. You will need the Titanium Backup app to pull this off, but once you install the app on your phone you can use the Extract from Nandroid Backup option that is located in the Restore menu that can be accessed from the Special Backup tab to get access to the apps and data you were using before your phone bricked.

How do you stop your phone from bricking?

You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser,

#1

Hey people, I am slightly new to xda developers but I am an experienced rooted user. So I saw many people who are inexperienced at rooting their phones brick their phones very easily. Yes I did notice a few “how to avoid bricking your phone” threads but they are quite old.

  1. Since the new versions of updates and apps are rolling out, I thought it might be a good time to post a newer thread.
  2. Ways to avoid bricking your device.
  3. When flashing a custom rom or kernel, ALWAYS use the kernel or rom that is for your device and your device only,
  4. I realized that online it does not say anything about always flashing the custom rom or device that is for your device only.

Many users are out there who brick their phones by flashing the wrong rom or kernel. ( I myself have once bricked my phone like this). * Avoid apps that can brick your device. Many people brick their phones like this because once you have a rooted device, you want to try out all the cool root apps.

Also please people name some apps that will brick your device as well. *** APPS THAT CAN BRICK YOUR DEVICE*** Fonts installer(root), Chain fire 3D when installed on AOS 4.0 and above, switchme when installed on a custom rom, and so on. (I have more apps I could list but I am sure people out there will post it).

The basic idea is read the comments about the app and see if the app is safe. Many people just get the apps online without researching and end up bricking their phones. EDIT: Any type of font installer app that is for rooted phones only have a high chance of bricking your device.

One tap root apps can give a virus to your device without knowing and have chances that it will brick. After all, it is an application that roots your device, there is always a catch. z4 root for example will give you a virus and brick your device. Rom manager *can* brick your device if you try to flash a custom recovery.

For Rom manager, there are users who have successfully flashed a custom recovery and users who have bricked their phones. There is definitely a risk, so I recommend flashing a custom recovery on a safer application like goo manager. Goo manager will be safe if you READ the instruction, if you do not, you will be carrying a brick in your pocket.

  1. When flashing/installing or in a rooting progress be patient When flashing or rooting be patient.
  2. Do not unplug or turn off the device when in a rooting or flashing progress because that will brick the device, and I am not talking about boot loop/soft brick.
  3. Im talking about hard brick, a black screen no sign of life brick.

(Once bricked my phone like that lol). * Research and follow instructions. Many people tend to skip the reading and researching and do it by their feeling. Then what happens? They carry around a brick in their pocket. Research about your phone and learn it.

  • All I got to say for this one is, READ READ AND READ.
  • Anyways everyone that is all I got to say, I have more things but they are minor and someone will definitely post it.
  • Please everyone take the time to comment your thoughts and ideas on how to avoid bricking your device.
  • I hope many users found this helpful.

Last edited: Mar 12, 2014

#2

Good informative article, but, when your phone have to brick, it will brick hehe

#3

Good informative article, but, when your phone have to brick, it will brick hehe lol

#4

Tell us, what other apps to avoid/be careful with? Pls. Btw this thread is good idea. Last edited: Mar 11, 2014

#5

Can i recover my phone from brick without any backup of old stock rom?

#6

Hey people, I am slightly new to xda developers but I am an experienced rooted user. So I saw many people who are inexperienced at rooting their phones brick their phones very easily. Yes I did notice a few “how to avoid bricking your phone” threads but they are quite old.

  1. Since the new versions of updates and apps are rolling out, I thought it might be a good time to post a newer thread.
  2. Ways to avoid bricking your device.
  3. When flashing a custom rom or kernel, ALWAYS use the kernel or rom that is for your device and your device only,
  4. I realized that online it does not say anything about always flashing the custom rom or device that is for your device only.

Many users are out there who brick their phones by flashing the wrong rom or kernel. ( I myself have once bricked my phone like this). * Avoid apps that can brick your device. Many people brick their phones like this because once you have a rooted device, you want to try out all the cool root apps.

Also please people name some apps that will brick your device as well. *** APPS THAT CAN BRICK YOUR DEVICE*** Fonts installer(root), Chain fire 3D when installed on AOS 4.0 and above, switchme when installed on a custom rom, and so on. (I have more apps I could list but I am sure people out there will post it).

The basic idea is read the comments about the app and see if the app is safe. Many people just get the apps online without researching and end up bricking their phones. EDIT: Any type of font installer app that is for rooted phones only have a high chance of bricking your device.

One tap root apps can give a virus to your device without knowing and have chances that it will brick. After all, it is an application that roots your device, there is always a catch. z4 root for example will give you a virus and brick your device. Rom manager *can* brick your device if you try to flash a custom recovery.

For Rom manager, there are users who have successfully flashed a custom recovery and users who have bricked their phones. There is definitely a risk, so I recommend flashing a custom recovery on a safer application like goo manager. Goo manager will be safe if you READ the instruction, if you do not, you will be carrying a brick in your pocket.

  • When flashing/installing or in a rooting progress be patient When flashing or rooting be patient.
  • Do not unplug or turn off the device when in a rooting or flashing progress because that will brick the device, and I am not talking about boot loop/soft brick.
  • Im talking about hard brick, a black screen no sign of life brick.

(Once bricked my phone like that lol). * Research and follow instructions. Many people tend to skip the reading and researching and do it by their feeling. Then what happens? They carry around a brick in their pocket. Research about your phone and learn it.

  1. All I got to say for this one is, READ READ AND READ.
  2. Anyways everyone that is all I got to say, I have more things but they are minor and someone will definitely post it.
  3. Please everyone take the time to comment your thoughts and ideas on how to avoid bricking your device.
  4. I hope many users found this helpful.

I bricked my poco X3 NFC by installing a recovery image by *flashify* app p.s: i had root access and i already have TWRP, but the reason i wanted to switch to orange fox it’s because i haven’t access to the whole storage on TWRP recovery so i wanted to install Orange Fox to try it out, and i was too lazy to install it by PC, and i said to myself, why not installing it by the phone it self! After installing it on *Flashify* it asks to reboot, after that i got a bootloop and i don’t even know if it’s installed, Now the phone it’s returned to the shop so it can be fixed. But altough it’s happened, i’m planning to flash more custom rom, ad try the cool Kernel s cause it’s fun.

#7

Tell us, what other apps to avoid/be careful with? Pls. Btw this thread is good idea. Bro i bricked my poco x3 by *Flashify* app it’s on google play and it bricked my phone.

#8

Those members posted in 2016! So don’t expect a reply. Flashify app hasn’t been updated since 2015.be ware.

#9

Those members posted in 2016! So don’t expect a reply. Flashify app hasn’t been updated since 2015.be ware. Didn’t know that but thx for tye info

#10

Bricking is a condition when a device is usually interrupted in an attempt to update the device. There can be 6 steps to avoid bricking (1) custom recovery, (2) know ADB and Fastboot commands; (3) keep a factory image on your phone; (4) keep a Nandroid backup on your phone; (5) keep copies of both backups on a computer; (6) if you can’t replace your battery, know how to hard reset your phone.

#11

U gave ur phone in shop what did they said?

#12

Honestly one of the most laughable things imo is to return your phone to the shop or any technical expert shop. Guys what you want the shop to do for you? Factory Reset? Don’t think them as a real experienced ones, they just know the basics. Any any one who have an experience of installing custom ROMs or TWRP & Rooting, is better than most of the shop repairs.

They are just experiencers for the AVERAGE people. I maybe even when I sometimes go to the shop to fix my devices, I tell the employee what to do, because they hardly know about their tools. IF YOU DON’T WANT TO SPEND A LOT OF TIME, DON’T ROOT. Basic Logic, Root isn’t for normal users and wont give you a huge advantages.

Root is ONLY for fun and amusing, there are no real need of Root. So if you’re too lazy to search for solution and trying many methods of solving your problem, and you just hurry to fix your device. DON’T ROOT IT.

How do I fix my Samsung soft brick?

How to Recover a Bricked Samsung Galaxy (with Pictures)

  1. 1 Download the “odin3 vl.85” zip files on your computer. You can download the Odin files by going to, and clicking on “Copy to my files.”
    • Samsung Galaxy basically has two types of bricks: soft brick and hard brick. Soft brick is temporary, which means your device can still be brought back to its normal state. It is often caused by invalid or corrupted firmware installation, flashing bad scripts, and attempts to root the device. A hard brick is harder to fix, and your device cannot boot at at all.
  2. 2 Unzip and extract the downloaded firmware. To unzip and extract the firmware, right-click on the zip file. From the context menu, click on “Extract here.” Advertisement
  3. 3 Double-click on the,md5 file. This will run Odin.
  4. 4 Make sure that only “F.Reset Time” check box is selected in the Odin window. The Odin window is under “Option” on your PC.
    • In case other options are also selected, click on the check box beside each of these options to remove them from the selection.
  5. 5 Click on the “PDA” button located in the Odin folder. Afterwards, choose the “VRALEC” bootchain file with the “.tar.md5” extension.
  6. 6 Power off your Samsung Galaxy, and boot it in Download mode. To do this, simultaneously press the Volume Down button (the bottom button on the left side of your device), the Home button (middle button at the bottom section of your screen) and the Power button (on the right side of your device).
    • Press on these buttons until a warning message is displayed on your screen.
    • Press the Volume Up (the top button on the left side of your device) to continue to Download mode.
  7. 7 Connect your Samsung Galaxy device to your PC. Use a USB cable to connect your devices. After successfully connecting them, an “Added” message will appear on the Odin window on your PC.
    • If the message doesn’t appear, check if your Samsung Galaxy and PC are indeed connected.
  8. 8 Click the “Start” button on the Odin window on your PC. This will flash the VRALEC bootchain. Wait until a “Pass!” message is displayed on the Odin window on your PC before you continue.
  9. 9 Restart Odin. Close Odin by clicking on the “X” at the corner of the Odin window (this is the “Close window” button), and then restart it by double-clicking on the “Odin” icon on your desktop.
  10. 10 Extract the “stock.vzw_root66.tar” file. Extract it from “stock.vzw_root66.7z” from the Odin window into a separate folder on your PC. You can do this by dragging “stock.vzw_root66.tar” from the source (stock.vzw_root66.7z) to a new folder on your desktop.
  11. 11 Click on the “PDA” button in the Odin window. Afterwards, load the “stock.vzw_root66.tar” file on your PC by clicking on it.
  12. 12 Configure the options. Select the following options under the “Options” drop-down menu: Auto Reboot, F. Reset Time, and Nand Erase All.
  13. 13 Click on “Start” button on your PC in the Odin window, to start flashing the ROM. This will begin the flashing process. Wait for it to finish, and as soon as the process is complete, a green “PASS” message will be displayed.
    • Don’t unplug the device or interrupt the flashing procedure under any condition.
  14. 14 Restart your Samsung Galaxy. Do this by removing the battery and re-inserting it into your Samsung Galaxy.
  15. 15 Press and hold the Volume Up/Down, Home, and Power buttons simultaneously. Upon holding these three buttons for 10 seconds, the Samsung Galaxy welcome screen and a menu with green and blue letters will appear (also known as the Recovery menu).
  16. 16 Select “Reboot system now” from the menu. In the Recovery menu screen, use the Volume buttons to scroll up or down, and the Power button to select.
    • Don’t panic when you see error messages. They’re expected and simply imply that the debricking of your soft-bricked Samsung Galaxy is being done correctly. The following error messages could be displayed on the screen while performing the above step:
      • E:failed to mount/data (Invalid argument)
      • E:Can’t mount/data/fota/ipth-muc.prop
      • E:failed to mount /data (Invalid argument)
      • E:Can’t mount /data/fota/ipth-muc.prop
      • E:failed to mount /data (Invalid argument)
      • E:Can’t mount /data/fota/ipth-muc.prop
  17. 17 Select “Wipe data/factory reset” from the Recovery menu. Do so with the help of the Power button. This will bring you to the next screen.
  18. 18 Select “Wipe cache partition” on the next screen. Simply look for “Wipe cache partition,” and select it using the Power button.
  19. 19 Select “Reboot system now” to reboot your phone. Your device will then be rebooted automatically. Wait for a few minutes, and you will have your Samsung Galaxy debricked.
  20. Advertisement

: How to Recover a Bricked Samsung Galaxy (with Pictures)

Does a bricked phone charge?

Can a bricked phone be repaired? – Whether or not you can repair your bricked phone depends on how the phone got bricked and its present condition/response when you press the power button. But before we proceed, we’d like to clarify something. Many people usually misuse the word “bricked” for a phone that still turns on when you pressed the power button.

If your phone is bricked, that means it won’t power on by any means. No matter what you try, the phone won’t turn on or charge when you plug in the charger. More so, pressing the power button won’t do anything but keep the phone in its dead position. However, if your phone is stuck in the boot loop or it enters recovery mode when you try to turn it on, that means it’s not bricked; a technician could fix it easily.

Nonetheless, here are some situations where your “bricked” phone may be repairable:

How does a bricked phone behave?

You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser,

#1

People asked me Hey TechnoCrat, Rooting my Android phone went well, but I’ve tried to flash a custom ROM and now I think I’ve bricked my phone. Is there anything I can do? First of all, lets get something straight. Most people use the term “bricked” improperly.

A bricked phone means one thing: your phone won’t turn on in any way, shape or form, and there’s nothing you can do to fix it. It is, for all intents and purposes, as useful as a brick. A phone stuck in a boot loop is not bricked, nor is a phone that boots straight into recovery mode. These are things you can usually fix, and they’re a lot more common than a truly bricked phone.

If your phone is actually bricked, you won’t be able to fix it yourself (but there are things you can do—see the end of this article). For those other problems, you have a few options. If Your Phone Keeps Rebooting: Wipe Your Data and Cache How Do I Fix My Bricked Android Phone? If you’ve flashed a ROM and your phone won’t boot into the home screen, it’s probably because you forgot to wipe your data and/or cache.

It’s trying to boot into the ROM, but some leftover data from your last ROM is causing it to error out, and it’ll reboot itself over and over again. If your phone’s eating a big bowl of boot loops, your first course of action should be to wipe its data and cache, which you can do from recovery mode. This method assumes you’re using ClockworkMod Recovery, like the majority of Android users, but if your particular phone uses a different third-party recovery (like AmonRA), you should still be able to find these options in the interface.

They might just be in a different place. To wipe your data and cache: Power down your phone. Turn it back on and boot into Recovery mode. This is a bit different for every phone, so you’ll have to Google how to do it for your specific model. Usually it involves holding down another button, like Volume Down, as you turn your phone on.

HTC phones will have to then select “Recovery” from a menu, while other phones will boot directly into ClockworkMod. You’ll know you’re in ClockworkMod by the words “ClockworkMod Recovery” at the top of the screen. Use your volume keys to navigate the menus, and your power button to select menu items.

Scroll down to Advanced, and choose “Wipe Dalvik Cache”. When that’s finished, go back to the main screen and choose “Wipe Cache Partition”. Lastly, head to “Wipe Data/Factory Reset”. This will delete all your settings and apps, but you should still be using the correct ROM.

Reboot your phone. With any luck, it should boot right into your ROM. If that didn’t work, try the below method with the same ROM (or with a different ROM) and see if you get different results, If Your Phone Boots Straight Into Recovery: Flash a New ROM How Do I Fix My Bricked Android Phone? If, when you boot up your phone, it goes straight into ClockworkMod, then there’s likely an issue with the ROM you flashed.

Note that some ROMs boot into recovery mode automatically after flashing, so reboot your phone once from recovery mode to make sure you’re having a problem. HTC users: if you boot up your phone, it might go straight into the bootloader—check to see whether you can choose “Recovery” from the list before continuing to the next step.

  1. HTC phones usually don’t boot straight into recovery.
  2. In this case, you’ll want to reflash the ROM from scratch.
  3. Try again with the ROM that messed up your phone, if you so choose, but if that doesn’t work, try an entirely different ROM.
  4. The best way to do this is to download a ROM from somewhere on the net and putting it on your SD card.

You’ll need to take the SD card out of your phone, and you’ll need an SD card reader that you can plug into your computer. Here’s how it works: Plug the SD card into your computer. Drag the ROM’s ZIP file to your SD card, and wait for it to copy. When it’s done copying, eject the SD card and put it back in your phone.

  1. Reboot into Recovery mode.
  2. This is a bit different for every phone, so you’ll have to Google how to do it for your specific model.
  3. Usually it involves holding down another button, like Volume Down, as you turn your phone on.
  4. HTC phones will have to then select “Recovery” from a menu, while other phones will boot directly into ClockworkMod.

You’ll know you’re in ClockworkMod by the words “ClockworkMod Recovery” at the top of the screen. Use your volume keys to navigate the menus, and your power button to select menu items. Scroll down to “Install ZIP From SD Card” and navigate to the ZIP file you just copied over.

  1. Give it time to flash the ROM.
  2. When it’s done, reboot your phone.
  3. Hopefully, your phone should successfully boot into the new ROM.
  4. From there, you can probably assume that the previous ROM that messed up your phone isn’t going to work, and you’ll have to find another ROM for now—or find another copy of that ROM that isn’t corrupted.

Remember to make backups of your working ROMs so you don’t lose all your data! If Your Phone Boots Straight Into its Bootloader: Restore From a Stock ROM If you’re really having trouble, one of the most surefire ways to get your phone working again is to restore from the original ROM your phone came with—unrooted, stock, stable goodness.

  • Each manufacturer and phone has a different method for doing this, and we can’t go into too much detail here, but we can steer you in the right direction.Like Samsung has odin.
  • Note that this will unroot your phone, and return it to exactly how it was when you bought it from the store.
  • You’ll lose all your apps, settings, ClockworkMod recovery, you’ll get over-the-air updates again, and you’ll even have to re-activate your phone if you’re on a CDMA provider like Verizon or Sprint.

For Samsung Phones: If you’re using a Samsung Galaxy phone, you can use a tool called Odin to reflash an OPS file, which is a stock ROM that will return your phone to factory settings. You’ll need a Windows machine and a copy of Odin, which you can find by Googling around the net (as its not an official tool).

  • Check out the video to the left to see an example of Odin, and check out The Unlockr’s guide to using Odin to familiarize yourself.
  • You may need to Google around for your specific device’s OPS file and instructions.
  • If You Get Errors with Any of The Above Methods: Reformat Your SD Card and Don’t Give Up This is less likely, but it’s a problem I and a few others have run into on occasion: sometimes your SD card just gets corrupted, which makes the above methods useless (since they rely on your SD card to work).

Take your SD card out of your phone, put it into your computer using an SD card reader, and format it. It’s very important that you format it through an SD card reader directly and not by plugging in your phone in USB mode—I learned this the hard way.

Format it as FAT32 and try the above methods again. Other errors, like during the ROM flashing process, might give you a hint as to what’s wrong. Try heading to the XDA Developers forums and asking for help, as your phone could have one of a million specific problems we can’t address here today. Remember, if your phone turns on, there’s still a good chance you can recover from whatever error you’re experiencing, so don’t give up just yet! If Your Phone Is Truly Bricked: Take It Into the Store and Play Dumb If your phone is actually bricked—that is, it won’t turn on at all, no matter how hard you try—it’s time to give up and move on.

The first thing you can do in this situation is try to take it back to your carrier’s store and play dumb—just say something like “I don’t know what happened, but my phone won’t turn on anymore” (don’t tell them you rooted it, obviously). Most carriers don’t have time to deal with such issues and they’ll just give you a new phone.

Sure, it’s a tad evil, but it should work most of the time. If they’re wise to your act, though, you can try another store or just sell your bricked phone for a few bucks on Craigslist. Sadly, if no one will replace your phone, you’ll have to buy an entirely new one. Such are the dangers of rooting, but don’t be discouraged! Bricking your phone is pretty rare, so I wouldn’t worry about it being a common occurrence.

As always, though, when you void your warranty, only do so if you’re ready to replace that device completely, since you never know what can happen. Source::Lifehacker

#2

Bump Sent from my GT-I9103 using xda app-developers app Nov 7, 2011 7,166 3,234 109

#3

So you’re bumping a thread full of info you lifted from another site word for word ? Classy. (That you’ve gave credit is irrelevant, you could just as easily have posted a link somewhere, and this stuff has been posted here thousands of times before already)

#4

So you’re bumping a thread full of info you lifted from another site word for word ? Classy. (That you’ve gave credit is irrelevant, you could just as easily have posted a link somewhere, and this stuff has been posted here thousands of times before already) Wouldn’t that be irrelevant? I start a thread and just post links? Sent from my GT-I9103 using xda app-developers app

#6

What if it boost into CWM recovery but none of the options work? And Odin won’t recognize the device because of driver issues? People asked me Hey TechnoCrat, Rooting my Android phone went well, but I’ve tried to flash a custom ROM and now I think I’ve bricked my phone.

Is there anything I can do? First of all, lets get something straight. Most people use the term “bricked” improperly. A bricked phone means one thing: your phone won’t turn on in any way, shape or form, and there’s nothing you can do to fix it. It is, for all intents and purposes, as useful as a brick.

A phone stuck in a boot loop is not bricked, nor is a phone that boots straight into recovery mode. These are things you can usually fix, and they’re a lot more common than a truly bricked phone. If your phone is actually bricked, you won’t be able to fix it yourself (but there are things you can do—see the end of this article).

  • For those other problems, you have a few options.
  • If Your Phone Keeps Rebooting: Wipe Your Data and Cache How Do I Fix My Bricked Android Phone? With any luck, it should boot right into your ROM.
  • If that didn’t work, try the below method with the same ROM (or with a different ROM) and see if you get different results,

If Your Phone Boots Straight Into Recovery: Flash a New ROM How Do I Fix My Bricked Android Phone? If Your Phone Boots Straight Into its Bootloader: Restore From a Stock ROM If You Get Errors with Any of The Above Methods: Reformat Your SD Card and Don’t Give Up If Your Phone Is Truly Bricked: Take It Into the Store and Play Dumb Source::Lifehacker Nov 17, 2013 616 185 delhi Nov 17, 2013 616 185 delhi

#8

What if it boost into CWM recovery but none of the options work? And Odin won’t recognize the device because of driver issues? I got it fixed long ago, just try other computer and different cable (just in case) Hope this helps Hit thanks if I helped you sent from my SM-T211 using XDA Free mobile app

#9

boot loop, no boot logo. the phone keeps rebooting but no boot logo. just the “Samsung Galaxy S4 GT-i9500” i was just sending an SMS, and suddenly my phone rebooted. whenever i put my battery back. the phone turns on automatically and wont stop looping. tried to boot into recovery and DL mode, but nothing, just keeps looping. i have CM 11 (4.4.2)

#10

the phone keeps rebooting but no boot logo. just the “Samsung Galaxy S4 GT-i9500” i was just sending an SMS, and suddenly my phone rebooted. whenever i put my battery back. the phone turns on automatically and wont stop looping. tried to boot into recovery and DL mode, but nothing, just keeps looping.

#11

It’s not rom related. It’s a phisical problem, problably it’s a broke power button, or faulty battery. thanks for the answer. luckily it was still under warranty, (despite having CM 11, they do not check those thing here in argentina) took it to my carrier and they changed the POWER button.

#12

Bump Sent from my GT-I9103 using xda app-developers app Added!! Odin v.3 engine (ID:4). File analysis. SetupConnection. Initialzation. Set PIT file. DO NOT TURN OFF TARGET!! Complete(Write) operation failed. All threads completed. (succeed 0 / failed 1) Removed!! Added!! Removed!! i tried flashing the pit file but failed gt i9505(TCL) plz help!!!!!!!!!!!!

#13

I bricked my rca 4.1 android phone shaped like a galaxy s3 i cant seem to get off the logo screen please help thank you Sent from my LGL86C using XDA Free mobile app

#14

Softbricked Samsung galaxy grand prime SM-G530R4 Can some one plz plz plzzz help me. i softbricked my phone and Kies 3, and smart switch is not working i tried odin but it always gets stuck on NON-HLOS.bin Enter CS for MD5. Check MD5. Do not unplug the cable.

#15

Hello, I have a MediaTek device (Android 9, Lenovo Tab M8 FHD) I had it updated to Android 10 and in the process of trying to downgrade it to 9, I bricked it.badly.The indicator still responds to power buttons and plugging it in, but I cannot access recovery or fastboot. Is this tablet a goner or is there any fix?

#16

I was stuck in a bootloop after flashing AOSP rom. So I decided to power off and use SPFlashTool to flash the stock rom. But both SP and Techno flash tools give the following error: ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (-1073348607), MSP ERROE CODE : 0x00.

#17

i have a cricket Dream 5G phone nd it went brick it literaly says ´´your device is corrupted and is not trusted and may not work properly please visit link 9.co/ABH on another device

How do you anchor into soft bricks?

Self-Tapping Brick Masonry Anchors (Tapcon®/Concrete Screws) – Self-tapping brick anchors, concrete block or concrete screws are used for fastening items to brick. Concrete screws are most commonly called Tapcon® masonry screws, The heavy-duty masonry screw has the versatility for use in brick, mortar joints, CMU, block or solid concrete.

  • Install the masonry screw in brick by selecting a carbide bit with the correct diameter for that screw.
  • Drill a pilot hole with a hammer drill with the carbide bit.
  • Insert the masonry screw anchor into the hole in the brick and turned clockwise.
  • This will tap threads into the brick and hold the screw securely.

Masonry Brick Screw Sizes – The standard masonry brick screw comes in two diameters of 3/16″, 1/4″, 3/8″ and 1/2″ with lengths ranging from 1-1/4″ to 6-1/4″. The minimum length of masonry brick screw is determined by adding the minimum embedment depth of 1 ” to the thickness of the material being fastened. Head Styles – Two head styles are available with the standard masonry brick screw: the hex washer slotted, and the flat countersunk Phillips. All the hex washer slotted masonry brick screws lengths are measured from under the head and the flat countersunk Phillips is measured as an overall length.

Does vinegar dissolve brick?

” Q. I’ve been hand-pulling weeds for four days in a row and I’m in not even a third of the way through! Perhaps there comes a point when one turns to the help of chemistry, although I’m really afraid for safety of my outdoor cat. Any suggestions?

– Lena in Mississauga, ON, Canada.

I recently moved to a house with a brick walkway. Unfortunately the bricks do not have any concrete between them and lots of weeds keep coming up. I have heard you speak about flame weeders, which sound much better than chemicals. Where can I purchase one?

– Terri in Telford, PA

I have been searching for the tool you say you use to burn weeds, but have been unable to locate one. Could you please provide a source?

– Kathe at the Viking Resort in Penn Yan, NY

I was thinking about using concentrated Acetic Acid to kill weeds in the grout lines between our pavers. Will 20% vinegar harm flagstone?

– Haia in Reading PA

Clearing my patio by hand usually costs me a full Saturday and a good deal of knuckle skin. But even when I manage to get the roots, they come back in full force inside of a month. I’ve read about solutions that involve vinegar, salt, and boiling water. Of course, Round-Up is out of the question. What ARE the easiest ways to get these weeds?

– Tom in Norristown, PA

A. Yes, it’s been a nasty weed year. The historic heat wave many of us recently endured shut down everything I planted in my garden, but the weeds loved it! And yes, the weeds that grow in between the bricks, pavers, flagstones and such in pathways can be especially annoying.

And although Terri in Telford bemoans her lack of mortar, it’s a necessary fault of walkways—if those spaces were sealed up, the whole thing would crack apart from heat and cold stress. Never use vinegar on any kind of paver, brick, flagstone or concrete; it WILL damage the surface. Same for salt. And the oft-recommended ‘boiling water’ will damage your surface.

You ever try and carry a big pot of boiling water? It sloshes a little more violently with every step until some goes ever the edge, burns your hand, you drop the pot and scald your legs, feet and tootsies. Herbicidal soap sprays are a much more safe and effective walkway weed wanquisher.

Similar to insecticidal soaps, they smother their designated pest with a soap-bubble film—and leave your walkway clean and shiny! Soak the weeds well with the soap at the hottest part of the day during a dry spell and they will wither and die. And yes, one of my favorite garden tools—the trusty flame weeder—also works very well.

I use BernzOmatic’s “”Outdoor Torch””; you screw a camp-stove sized propane bottle into one end of the long wand, click the igniter and a cute little flame comes out the other end. Wait for a dry spell, wave the flame over the tops of the weeds, and they will dehydrate and die.

Any hardware or home supply store can order one for you, many stores have them in stock this time of year, and you can order directly from BernzOmatic by calling their toll-free #, 1-800-654-9011 (they don’t sell online) A number of other companies sell similar devices; the Canadian company Rittenhouse, for instance, sells a basic flamer and a more expensive device called the “”Infra-Weeder Dandy Destroyer”” that uses high-powered radiant heat instead of open flame.

It has a spike on the end (designed to plunge into the hearts of dandelions and cook them to death) that looks like it would do a swell job in the spaces between pavers. (Both of these tools use the same small, disposable propane bottles as the BernzOmatic.) Rittenhouse used to also have an “”Infra-Weeder”” with a flat head—HEY! I heard that!—that was designed just for walkway use, but it appears to have been replaced with a similar looking but very expensive professional model that uses a big refillable gas-grill sized propane tank and sells for over a thousand bucks as opposed to a couple hundred.

  • If you do choose flame, be careful not to set leaves or brush—or yourself—on fire.
  • This shouldn’t be a problem on pavers (the leaves and brush, anyway), but once you have one of these things, you are tempted to use it everywhere.
  • So if you wander off with your flamethrower, have a helper handy with a hose.

Or limit your pyromania to the patio and use a soap or “”vinegar”” spray to kill weeds in driveways and garden beds. I say “”quote”” because it is technically illegal to call vinegar an herbicide. In their slightly-less-than-infinite wisdom, the EPA has deemed vinegar safe to use and exempt from pesticide regulations, but only as an inert substance, despite the fact that vinegar is pretty much the opposite of inert.

  1. But the government says it is and if you argue with them they will fine you and have you stopped at airports for the rest of your life.
  2. You can buy 10% and 20% acidity “”high strength”” vinegars—they’re available in some retail locations and via the Internet—but by law they can’t call them herbicides on the label or tell you how to use them.

The best they can do is label them “”horticultural vinegars””, the assumption being that you will use them instead of nasty bleach to clean your pruning tools, nudge, nudge; wink, wink. That’s why the various organic herbicides popping up on retail shelves these days declare a different active ingredient; clove oil is a popular choice.

How do I fix my Samsung soft brick?

How to Recover a Bricked Samsung Galaxy (with Pictures)

  1. 1 Download the “odin3 vl.85” zip files on your computer. You can download the Odin files by going to, and clicking on “Copy to my files.”
    • Samsung Galaxy basically has two types of bricks: soft brick and hard brick. Soft brick is temporary, which means your device can still be brought back to its normal state. It is often caused by invalid or corrupted firmware installation, flashing bad scripts, and attempts to root the device. A hard brick is harder to fix, and your device cannot boot at at all.
  2. 2 Unzip and extract the downloaded firmware. To unzip and extract the firmware, right-click on the zip file. From the context menu, click on “Extract here.” Advertisement
  3. 3 Double-click on the,md5 file. This will run Odin.
  4. 4 Make sure that only “F.Reset Time” check box is selected in the Odin window. The Odin window is under “Option” on your PC.
    • In case other options are also selected, click on the check box beside each of these options to remove them from the selection.
  5. 5 Click on the “PDA” button located in the Odin folder. Afterwards, choose the “VRALEC” bootchain file with the “.tar.md5” extension.
  6. 6 Power off your Samsung Galaxy, and boot it in Download mode. To do this, simultaneously press the Volume Down button (the bottom button on the left side of your device), the Home button (middle button at the bottom section of your screen) and the Power button (on the right side of your device).
    • Press on these buttons until a warning message is displayed on your screen.
    • Press the Volume Up (the top button on the left side of your device) to continue to Download mode.
  7. 7 Connect your Samsung Galaxy device to your PC. Use a USB cable to connect your devices. After successfully connecting them, an “Added” message will appear on the Odin window on your PC.
    • If the message doesn’t appear, check if your Samsung Galaxy and PC are indeed connected.
  8. 8 Click the “Start” button on the Odin window on your PC. This will flash the VRALEC bootchain. Wait until a “Pass!” message is displayed on the Odin window on your PC before you continue.
  9. 9 Restart Odin. Close Odin by clicking on the “X” at the corner of the Odin window (this is the “Close window” button), and then restart it by double-clicking on the “Odin” icon on your desktop.
  10. 10 Extract the “stock.vzw_root66.tar” file. Extract it from “stock.vzw_root66.7z” from the Odin window into a separate folder on your PC. You can do this by dragging “stock.vzw_root66.tar” from the source (stock.vzw_root66.7z) to a new folder on your desktop.
  11. 11 Click on the “PDA” button in the Odin window. Afterwards, load the “stock.vzw_root66.tar” file on your PC by clicking on it.
  12. 12 Configure the options. Select the following options under the “Options” drop-down menu: Auto Reboot, F. Reset Time, and Nand Erase All.
  13. 13 Click on “Start” button on your PC in the Odin window, to start flashing the ROM. This will begin the flashing process. Wait for it to finish, and as soon as the process is complete, a green “PASS” message will be displayed.
    • Don’t unplug the device or interrupt the flashing procedure under any condition.
  14. 14 Restart your Samsung Galaxy. Do this by removing the battery and re-inserting it into your Samsung Galaxy.
  15. 15 Press and hold the Volume Up/Down, Home, and Power buttons simultaneously. Upon holding these three buttons for 10 seconds, the Samsung Galaxy welcome screen and a menu with green and blue letters will appear (also known as the Recovery menu).
  16. 16 Select “Reboot system now” from the menu. In the Recovery menu screen, use the Volume buttons to scroll up or down, and the Power button to select.
    • Don’t panic when you see error messages. They’re expected and simply imply that the debricking of your soft-bricked Samsung Galaxy is being done correctly. The following error messages could be displayed on the screen while performing the above step:
      • E:failed to mount/data (Invalid argument)
      • E:Can’t mount/data/fota/ipth-muc.prop
      • E:failed to mount /data (Invalid argument)
      • E:Can’t mount /data/fota/ipth-muc.prop
      • E:failed to mount /data (Invalid argument)
      • E:Can’t mount /data/fota/ipth-muc.prop
  17. 17 Select “Wipe data/factory reset” from the Recovery menu. Do so with the help of the Power button. This will bring you to the next screen.
  18. 18 Select “Wipe cache partition” on the next screen. Simply look for “Wipe cache partition,” and select it using the Power button.
  19. 19 Select “Reboot system now” to reboot your phone. Your device will then be rebooted automatically. Wait for a few minutes, and you will have your Samsung Galaxy debricked.
  20. Advertisement

: How to Recover a Bricked Samsung Galaxy (with Pictures)

Can you Unbrick a system?

Un-bricking – Some devices that become “bricked” because the contents of their nonvolatile memory are incorrect can be “un-bricked” using separate hardware (a debug board) that accesses this memory directly. This is similar to the procedure for loading firmware into a new device when the memory is still empty.

  1. This kind of “bricking” and “un-bricking” occasionally happens during firmware testing and development.
  2. In other cases software and hardware procedures, often complex, have been developed that have a good chance of un-bricking the device.
  3. There is no general method; each device is different.
  4. There are also user-created modifier programs to use on bricked or partially bricked devices to make them functional.

Examples include the Wiibrew program BootMii used to fix semi-bricked Nintendo Wiis, the Odin program used to flash firmware on Samsung Android devices, or the fastboot Android protocol which is capable of re-flashing a device with no software installed.

Is there a soft reset on Android?

Techlicious editors independently review products. To help support our mission, we may earn affiliate commissions from links contained on this page. When you operate your phone, it stores bits of data from the apps and features you use to help them run more smoothly.

  1. Over time, this data can pile up and cause multiple issues on your phone, including running slowly and becoming unresponsive.
  2. Sometimes freeing up space on your phone will help, but often, clearing the data by resetting your phone is the best way to address the problem There are two types of reset, a soft reset and a hard reset.

To perform a soft reset, you power off your phone and turn it back on. Restarting your phone closes all the processes and apps running on your phone and loads all the system files from scratch. A soft reset does not come with the risk of losing your data. What Is Soft Brick And Boot Loop